Unboxing And Testing Cheap Small Lathe WM210V-S

📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Hello friends. Today i will show you Unboxing And Testing Cheap Small Lathe WM210V-S. I have been looking for a small lathe for the workshop for a long time. After much looking and reading about the machine, I chose this one. I was pleasantly surprised. The video is not sponsored, I just bought the machine and decided to show it to you. I hope you like the video.
You can see the specification of the machine in the video.

[@bigbob1699]

Law #1 loose the long sleeves.

[@ErCanEverything]

I love compact machines and lathes are one of my favorites.😍 This lathe looks perfect my Friend and Thank you for showing us.🙏🍀🍀🍀 As I understood, can be make a thread from 0.5 to 3 mm?

[@HandmadeCreativeChannel]

This is the step of the threads. My friend thanks for the coment👌🍀☺️

[@ismulartymuis-yg2zr]

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

[@ascombate5803]

Is posible male thread milimetric?

[@sddiymakeitworthit7512]

Nice and welcome to your workshop 👍

[@HandmadeCreativeChannel]

Thanks brother👌🍀

[@ismulartymuis-yg2zr]

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia

[@VetvsWorld]

I find myself wondering whether I need a lathe now. Thanks for nothing. 🤣

[@wladimirlopes5841]

O que achou do torno.Pequeno demais ou no tamanho certo

[@liukang81]

Hey sir! I like your wm210v . I just got mine last week. It’s working great,only a few threads options did not work for me. Can you do me a favor? I have a bit of problems on thread pitch of 1.25mm . When I was change the gear according to diagram on the has shown us. I have tried exactly as it’s said, but it’s came out the first ran of 1.25mm tested was right pitch,and then I added the depths cuts it cut defer off cut ! I don’t know why? If you know what was or you got some clues please help me out sir! Thank you so much. God bless you!

[@oveschleisner-meyer8139]

Hello - Nice video.... but why do you have to put something under the cutting tool...? Shoulden't the center line and the cutting tool be adjustede from the factory?

[@FixitEasyDIY]

That would be very useful tool for you 😉

[@HandmadeCreativeChannel]

Yes my friend 👌☺️🍀

[@ismulartymuis-yg2zr]

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

[@ascombate5803]

Halo is posible make thread milimetric?

[@nasoran]

Пожелавам ти да те слуша и радва машинката и много успешни бъдещи проекти.

[@BedsitBob]

Probably a good idea to completely remove the chuck jaws, clean them, and lubricate the scroll and the bottoms of the jaws, that engage with the scroll.

[@pierrealexandrejamet309]

hello I would like to buy this tour. but I have a question please: the auto feed screw can it move in both directions of rotation? thank you

[@michaelbaykara2322]

I see you just got this lathe, i think this is the one i want to get, how do you like it so far? Thanks for showing the test cut.

[@abzyberdy]

If you still didnt got one. I got one last week. And it is very well build compared to what i know abot this model from russian and german forums. I will add electronic lead screw to this definitly.

[@victoragresti8760]

So..., where does one buy that wm210v-s lathe shown in your video?

[@drumtwo4seven]

It's on Amazon and AliExpress

[@rlewis1946]

@@drumtwo4seven Thanks for the info. From what I saw in this unboxing and first chips, it seems like a decent machine.

[@elysianbike]

I'd love to see a follow up video now that you've had the lathe for almost a year.

[@ericmahoney9357]

Cool video I'm just wondering you said it has a 38mm spindle bore, does that diameter continue through the machine to the hole at the back for long items?

[@jimbarchuk]

Yes, the way you described it, that is what that spec means.

[@MW-tg6jp]

I like the large bore for a small machine. 5 morse taper

[@user-bj9sy8gd4w]

Hello my friend. How can I get such a lathe and how much does it cost? Best regards

[@Dassick89]

basically the same model as a Vevor mx-210V. Just go onto their website.

[@sasapesic2728]

Koja je cena i gde se moze poruciti,adresa

[@brianrutherford9074]

Where did you purchase this lathe?

[@laplam9366]

Gia ban Bao nhieu?

[@paulmontgomery2726]

A whole new technique in appraising a tool and good to see a deaf, mute person giving it a go. In his silent world and totally wrapped up with protective garments to protect his skin from the modern world, I'm sure he is very happy in his achievement with this video.

[@Short-HHJ]

Price

[@tihzho]

Jump to 11:24 to get to the meat and potatoes 😄

[@_gkworkshop]

🤝🍀🍀🍀

[@HandmadeCreativeChannel]

Thanks brother 👌☺️🍀

[@ismulartymuis-yg2zr]

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

[@Khalid337b]

Where did you buy it?

[@Khalid337b]

؟

[@GVPARTS]

Ive had one for a year, every where you look there is problems . Vibrations over 600rpm, tailstock does not match center height of the spindle, mods needed. 3 jaw chuck will not spin true. Speed control knob may keep spindle spinning even when turned to zero. Cross slide is unstable, compound slide travel 23.mm. Compound slide gib adustments not consistant. Way too much play in the feed screw 1/2 turn before movement. Cross feed the same. Cross feed slide gib adjustment not consistant i.e. adjust at one end will be tight or loose at the other end. Carriage not aligned to feed screw so when you engage the feed screw it binds and lift the when tightened. There is so much more but I'm tired of writing. Really you need another lathe and a Mill to fix it all.. With all of these problems I'm glad I bought it. It functions just well enough to get small jobs done. Also If you want to be able to do anything slightly complex you will need to spend much more than the cost of the lathe on accessories & additional tools. A fun and expensive hobby . Cheers!

[@HandmadeCreativeChannel]

Hi friend, thanks for your comment. Yes it really is! I made a lot of improvements and adjustments to everything. Now there is no vibration and it works normally, but you really have to take the time to adjust it.

[@fodor7069]

The one I “bought “ has many “Chinese ,quality problems” ie. sintered gears that devolved , rapidly. Hopefully you have more luck.

[@HandmadeCreativeChannel]

I agree with you, but everything is flattering are normal with small improvements. Parts in my region have, and are pretty cheap.

[@ismulartymuis-yg2zr]

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

[@LukitoNjudak2-fz1cs]

Mesin impian dan masih belum terbeli karena faktor ekonomiku rendah.

[@kapmuanlalbenjamin730]

How many price this sir

[@MW-tg6jp]

500 quid

[@kawaahmed88]

ممكن سعر

[@philiprush2462]

Is this guy from another planet, is he mute, What's with all the protective gear?

[@user-dw1ri8ci8v]

Дали.може.да.секупи.и.колку.кошта

[@robertdominiczak6523]

I can’t believe you have not built a proper stand for your lathe, expect problems.

[@tas32engineering]

No coolant run off poor design.

[@grzcie2083]

Jednz minuta 40 sekund , najwarzniejszy kawałek filmu , otwieranie skrzyni, po prostu żenada.