Handyman Tips and Hacks That Work Extremely Well | by

[@Scapestoat]

Several of these techniques look really good, but if your splinter-wood cabinet door is broken like that, you toss it out of the window, then burn it, and then buy a proper wood cabinet. Because you deserve nice things in your life.

[@umaedu3097]

Can you tell what he used in the first clip...what is that green stuff and what kind of glue is that?

[@Scapestoat]

@@umaedu3097 It is epoxy resin. It works by adding a tiny bit of a catalyst to the resin, which makes it quickly "set" and become hard. The green stuff is just fibrous material. What it is exactly doesn't matter, but it is probably wood-shavings from pressure-treated wood. Epoxy has it's uses, but it is very expensive and often ugly. Using it to repair a splinter-board cabinet door makes little sense to me, as real wood is cheaper than a bottle of epoxy, and looks better to boot. :)

[@umaedu3097]

@@Scapestoat thank you kindly 😊

[@altonT]

If you have a blown hinge and need to repair, go get automotive body puddy. As a cabinet maker I have used body puddy numerous times. Works great.

[@ferrochinabisleri1587]

I did it with pattex "mille chiodi", and it holds up pretty well.

[@Bapuji42]

You mean Bondo?

[@lenny108]

1:06 This breaks again after one week.

[@johannel9367]

😅😅😅ĵ

[@catclark9488]

Do you mean body putty?

[@catclark9488]

Such good ideas but captions with what type of adhesives or resins etc, are being used would help :)

[@joeschmoe6516]

UV cured epoxy can be used as well, but it looks like he was using simple JB weld.

[@CB27]

Which type of resin is that for the door hinge repair?

[@DanGoodchild]

There are so many "tips & tricks" videos on KZbin that are just crap that I've nearly stopped clicking on them altogether. BUT! *THIS* one is different; this is full of genuinely useful information and it's presented well to boot. The techniques are easy to understand, practical, and to-the-point without any extraneous filler. Quantum Tech HD earned a new subscriber today; thank you!

[@fronck-93]

No solutions are not clear : Which glue you use for filling holes on the 1st example ? The 2nd with the pvc pipe is not an example, the 3rd with cement is for a professional. the 5th and 6th for DIY tiling are good. For the 7th with a cogwheel, none information on the materials use for the mold or the other between the mold and the wheel, the same.

[@alzack112]

​@@fronck-93of course you have to watch the full videos in the creator's own channel. Quantum tech only show you the sped up summary of what he's doing.

[@jack1d1XB]

Still some valuable ideas nonetheless, I liked the change from the more EXPENSIVE Versions, 😊👍

[@jaketheauroran]

This isn't generally useful. The "tips" are so time consuming that you're better of spending a couple bucks to replace a cog, or really poor substitutes (like for buying tile). Given that they don't have basic tools (like a good "flush cut saw" for trimming pegs), they don't seem like they're anything more than a clickbait channel

[@Propsman416]

Good video, but those louvres will fall out within a year of normal use. The glue joints are all end grain to long grain. A slight bump or even normal wood expansion and contraction will break the bond and the pieces will fall out.

[@mikg.7576]

Thanks for the info. What solution can i apply for this problem?

[@catclark9488]

@@mikg.7576 Cut slots into the frame for the louvres as well as gluing them

[@mikg.7576]

@@catclark9488 thanks a lot

[@charlotted.7878]

Ce serait plus long et je ne suis pas bricoleuse mais avec un cadre solide, des chevilles à chaque coin ça pourrait aller (et si on veux pouvoir régler l'angle des ouvertures on pourrait ne fixer que 2 coins de cette manière et relier les autres à un cordon)

[@Propsman416]

​@@mikg.7576 At the bottom of this response is a video of a guy making adjustable blinds. If you don't want them adjustable you can alter the design and add glue to the smaller "step" pieces. And use two pins per slat at the ends. Or cut slots in the stiles as indicated in a response above. (This could leave you with an exposed sloppy joint though, unless you cut a piece of veneer to cover the ends of the slots or can make exactly precise mortises for the slats. If you're not ever going to see the back of the louvres, or can live with the look, and want fixed slats, your simplest option is probably to cut small glue blocks that are slightly shorter in length than the width of the slats, and glue that to both the end of the slats (on their back faces) and the stiles. (Cut thin strips out of the slat material, about square, and then cut off about 3/4" long pieces. Imagine about 3/4" long section of the square top of a wooden chopstick.) So you have a little block of wood glued to the back side of each slat which is also glued to the stiles. Just make sure you are cutting the blocks out of longer strips, and not cross cutting them off the ends of slat material. You want long grain to long grain for gluing. kzbin.info/www/bejne/omWrm3WOZbKWm9E

[@AmazingSmart-ngth]

This is really informative and useful. Thank you for this amazing video.

[@kysmik8214]

Love all of these! My husband made a screen top for a 20 gallon fish tank that I was using with grow lights for an indoor plant nursery. The cat kept getting into it so he made the screen top and it looks exactly like yours only it fits a fish tank. This world runs because of people like you! Thank you for sharing your ability with the rest of us.

[@MariselaMarin-zv3vt]

You are awesome! Thanks for sharing . Please, next time indicate which products are you using

[@111fedot]

Ну советы хороши в этом видео, главное чтобы люди понимали например что они делали когда дверь чинили и что с чем смешивали! И так далее!

[@toofinger]

A great idea, you can also use superglue with soda, for such a repair of the place under the hinges

[@pazsperanza2687]

This has been the best and realistic repair videos \ post I've seen, well done !

[@doug7844]

Agreed. Better than some of the trashy click bait crap you see.

[@jaketheauroran]

I hope that's a joke. Almost all of this is so time-consuming and low-quality that you'd need to be really poor and/or desperate. Buying parts and building a screen is almost never better the just buying a screen. It a new gear wheel. The cost of the stuff you need to buy is about as much as what you'd buy without wasting your time

[@ednaldaalves79]

Esse canal é muito bom... Um abraço do Brasil!

[@小山-i5b]

😅😅😅　:😅😮真、:

[@jaewok5G]

6:08 I like the custom screen idea, but what is the channeled frame material/product?

[@migranthawker2952]

It looks like cable trunking

[@desg4381]

Really good video. Loved the door repair. So useful. Thanks

[@BDL090754]

Totally agree with Dan below....So much basic crap on fixes on YT, But this is outstanding - Thanks

[@JA53705]

What were the products used to fill the osb in the first segment. And why did you used two different things?

[@altonT]

Automotive body puddy will solve your problem. You don't have to guess.

[@CemKalyoncu]

It is two part epoxy.

[@Bapuji42]

​@@CemKalyoncuThe one in the right is. What's the one on the left? Wood glue and...?

[@amralimran1294]

Wood glue and saw dust

[@Bapuji42]

cum and rat droppings

[@keilagalvao4782]

Acho que você é um gênio!! Muita criatividade para resolver tudo! Muito obrigada!

[@aprildegele1510]

I'm assuming the "brick" uses hardi backer as a substrate. Brilliant. Also, if you're only going to purchase one forstner bit, do so for door and cabinet hardware.

[@pocket83]

I thought it was drywall.

[@georgelequin5070]

Love that gear repair trick!👍👍👍

[@jack1d1XB]

Many of these ideas could be adapted further ie: Paint magnet could have an adjustable strap so it can be used on different siza cans: Magnet sown into waterproof plastic fabric with Velcro male to female ends for end connection AKA: reusable, 🤓💡

[@deannacauley166]

this is by far the best you tube hack videos in existence.

[@sitioquintadaluz]

Deus de dê em dobro todos os ensinamentos .......muitas bênçãos em toda a sua vida🍀🍀🍀🍀

[@ca6177]

I'm always really impressed by the ideas presented here!😮

[@RAnanger]

After all this 5-minute-craft-bullshit it was really amazing to see this good repair-video. Thanks for this

[@adakimiaamu]

凄いアイデアですね🤗🎵見てて楽しかったです♪♪

[@b33ro]

Wow finally diy hacks that are not total crap. Thank you. I will subscribe.

[@ЛюдмилаЗубалевич-ч8д]

БлагоДарю за полезную и нужную информацию.) Всем МИРа.)🌹🌹🌹🌹🌹

[@tonypisano3636]

Well done and bravo.👏👏👏👏👏👏👏

[@farahdibastephanus8584]

Brilliant! Thank you for sharing

[@HobiHolic]

very usefull

[@Thaissa81]

Which product in spay are you using in the video to pain the surface? Thanks

[@Alotipsalo]

WOW...great ideas 💡 ✨!!! I will definitely use some of these ideas. THANKS 😊

[@detudoumpouco338]

amo esses vídeos,adoro criar minhas próprias tralhas com todo respeito ❤❤❤

[@lajosvarga6159]

Jó lett! Pont kétszer annyiba került a javítás mint egy új ajtó

[@tropezando]

I love the brick roller. Reminds me of the specialty pastry and cookie rollers I've seen. I'd love to make one to customize some cardboard stuff and fabric prints I make.

[@SnappySnapfire]

waste of materials

[@IronStitches]

Wow, these tips and hacks are actually very good. Thank you.

[@storythenandnowus]

But gotta admit, the guy did a really clever job with this video. If I could pull off something like that, for sure, the wife at my place would love it, ahaha.

[@litostaun]

Le pediría que añadiera los materiales que está usando, qué resinas, cantidades, etc. Muchas gracias por sus videos. I would ask you to add the materials you are using, what resins, quantities, etc. Thank you very much for your videos

[@erigabu]

not a "clickbait garbage&dangerous" tips&tricks ... finaly, good video!

[@dariopenone]

Great! These are wonderful tricks! Thank you so much!"

[@Тамара-и2щ4н]

Спасибо, очень полезные советы!!!

[@ramoncelloONE]

Me a encantado el vídeo, espero que subáis más vídeos de este estilo!!!! 😃😃😃👍🏼🤜🏼🤛🏼

[@edwardjski]

what are you using for the window screen frame? It looks like wire channel.

[@mariaomairavasquezechavarr8839]

Espectacular...Muchas gracias. 🇨🇴

[@Alex-Tips]

useful ideas, great videos

[@tinetingeltangel9145]

Danke,hat zufällig ein langes Problem gelöst,gewusst wie😊! Bravo!

[@yabinuh]

saya suka dengan ide-idenya... Kreatif👍

[@stervozina-t6x]

Мне совершенно это не нужно, но завораживает!👍👏👏👏

[@leegarner4111]

Now that was agood DIY video,we need more like that.

[@littlespinycactus]

Inspiring, as ever.

[@Azzaro-g6t]

That first hack is awesome actually they are all great. 👌

[@carolineyoung8186]

Brilliant video great Ideas .❤

[@muchopomposo.6394]

Brilliant tips..! 👍🏻

[@Daotrongnhat]

những meo văt này cưc kỳ hiêu quả của thơ sữa chữa, cảm on ban đã hia sẽ

[@emperatriza5592]

Excelentes ideas 🎉🎉🎉

[@paulinegraham6839]

Fantastic ! Thank you

[@johanhumblet6090]

hi, what is the product you make around 28 seconds?

[@MAS.007]

Super cool tips and tricks!

[@jeffcole5708]

Clever ideas and expertly shown.

[@AntOfThy]

Would be good if details of what type of resins, glues, and powders were being used and why! Without that detail much of what is shown is usless to anyone wanting to make use of it, to fix things.

[@diyadkim]

I want to try it, too. I'll try to succeed in Korea, too

[@MikeJones300-m3y]

Today on "when money isn't a option" we do whatever the first video is about 😅😂😅

[@skybox-101]

6:27 What is the little powder they sprinkled on the glue amd what does it do?

[@ohyeah3750]

Baking soda on super glue. Sets up fast and adds strength

[@notreally2406]

Epoxy with sawdust. It sets up quickly and inspires the constabulatory.

[@CemKalyoncu]

You could also use cotton. Cotton + super glue gets hot and will dig into the plastic, making it extremely strong.

[@skybox-101]

@@ohyeah3750 Ohhh!

[@skybox-101]

@@notreally2406 wow!

[@salmanmirza1888]

Nice video ❤❤❤ Love from india

[@garymcgarity9839]

Tile is being combed with motor the wrong way. Key is to comb the mortor with the shortest side of the tile so when you collapse the mortor ridges majority of the the air can escape for proper coverage.

[@БаламутЧумаБорода-ы7х]

0:30 Серьёзно? Купить поллитра клея на один раз? Чтобы отремонтировать разлом вот петри? А клей потом засохнет? Вы кому это показываете? Мастеру? Он и без вас всё это знает и сделает? Для мужика, кто раз в 5 лет берёт отвёртку, дрель, плоскогубцы? Это сколько чего нужно купить, чтобы приготовить тот же самый клей? И потом куда остатки девать? На балкон? Сохнуть?

[@Е.Н-и4р]

Пва строительный в любом магазине и в разном объеме продается,, глупость какую-то сказали, я женщина это знаю, а вы... мозгам вкл надо вам сделать, кому надо тот почерпнет для себя идеи и применит, или интерпретирует, или доработает как ему нужно со своими модификациями, главное идея, остальное мозги того кто увидел идею. Кстати пва поищите как можно не дать засохнуть, и воплей тогда не будет, если вы не знаете, то не стоит гавкать на тех кто знает

[@Marina-ej7bl]

Bravo!! Bravo!! Bravo!!

[@deblync]

this guy's a genius!

[@ВиталийМихайлов-я7р]

Спасибо вам за информацию!.

[@idetubeid]

Brilliant 👍

[@CoolIdeasDIY-qv1nz]

Very good👍

[@orxankengerli]

Hello. Thanks so much. I need to know sticky liquids and grass for door closer. What is name of liquids? at 0.26 - 0.38 second.

[@TundeEszlari]

Super video.

[@terrybeaud9348]

I tried looking thru comments to find my answer but none found .... What is the white plastic material used to make the screen frame ?

[@mohamedellajni4203]

جميل ما قدمت لك مني كل تقدير

[@t1ber1an]

Thx, the fly screen for me personally is the most usefull

[@mariaschellekens1823]

Thanks for the tips that you gave

[@giallo.]

8:30 da quando il legno si incolla di testa?

[@蔡景式]

鉸鏈門片修復要多少錢？買新的可能都差不多錢。除非買不到了XD。

[@pedrogundim5536]

thanks because the featured image did not disappoint me.

[@anthonym.pacelli1960]

Theres some great ideas here, thanks !

[@Ideiasdenegocioserendaextra]

Muito bom o canal heim!

[@mauricebate5069]

Great ideas 🤗

[@Mr2TIMOTHY4V2]

Best video in this field!

[@poppy3026]

I HAVE A PROBLEM THINKING THAT THE GLUED LOUVERS WILL LAST WITHOUT ANY OTHER ANCHORING. WHAT IS THE STRONGEST GLUE TO USE ON THE LOUVER SLATS ???

[@pocket83]

Probably an epoxy. Wood glue will fail. But let's be honest; gluing end-grain is not really a reliable way to build a louvered cabinet/door. Chances are this design will break.

[@GoldenDragonic]

7:45 как сделать "замечательные" жалюзи которые через годик высыплются к хренам.

[@ВалерийЕмельянцев]

Придумайте лучше !

[@GoldenDragonic]

@@ВалерийЕмельянцев нечего там придумывать, фрезеруются по шаблону пазы в стойках и уже в них вставляются ламели. Можно даже не клеить, как и использовать готовое изделие хоть в ванной комнате, хоть в бане. Сломали ламельку или несколько? Разбираем, по одной делаем копию, ставим в места сломанных - никаких проблем с подгонкой углов вставленных к старым.

[@МаксимЗязызак]

Годик? Пару месяцев )))

[@GoldenDragonic]

@@МаксимЗязызак тут всё таки как пользоваться, если почти не открывать и влажность не прыгает то и дольше года прослужат. Но вообще сама идея так делать жалюзи - угребищна.

[@МаксимЗязызак]

Можно запаковать и спрятать на чердак,тогда вечная буит )@@GoldenDragonic

[@Babuin2000]

I really like these life hacks for millionaires. The first is with fixing the door. Buy a pipe, buy epoxy resin, buy PVA glue, find wood shavings somewhere. Buy white paint (to paint over this I shit, smeared, sculpted). It's cheaper to order a new door.

[@MrDetaycII]

Hyper excellent... Hyper thanks..

[@steveramadivhana1553]

Yooo this video is good for handyman

[@blechtic]

Just 1:54 in and I hate the person who chose to add background muzak.

[@bluevireo425]

All I can say is WOW.....Thank you so much, great information. Subscribed.

[@ssvon72]

love, love, love this instruction!!! blessings and be well

[@raynatullett7063]

Would you please give us a link to Door Closer channel? It is hard to find. Thank you.

[@sergioatcr]

👏👏👏👏 Olé, me quito el sombrero

[@orxankengerli]

6.26 second. Please explain elements. What is it name?

[@christophercharles9645]

How does applying tile mastic from a hand-built box help you? Just apply it with the hand trowel and put up the tile. DONE! Why add extra steps?

[@mildredi5408]

Good video good ideas . I love it. Thank you

[@mohamedelsaka7043]

Thanks from Egypt 😊

[@paulcohen1555]

Which spice he is mixing with the epoxy?