HanFong SMP50 - MPPT100/50

[@fabio7879]

Salut, merci pour la vidéo. J'ai acheté un Mppt égal au vôtre mais ils ne m'ont pas fourni les instructions. Pourriez-vous s'il vous plaît m'envoyer des photos du manuel? Merci

[@okbabalola]

How about the use of the charge controller? Has it been working well since you started using it?

[@maclow5211]

For now it's working quite fine. Voltage is precise / pannels 24V with a 12V system I don't have big consumtion on my Battery system for now and almost all time in float (some bulk on the morning to rise up the battery voltage) I am planning a more heavy use in the coming weeks.

[@okbabalola]

@@maclow5211 have you been able to get data from it with the VE direct cable? Does it work like the victrons? looks like its a clone...

[@maclow5211]

@@okbabalola For now I was not able to have connection with VE cable (I need to deep on it, but had no time). Maybe display needs to be disconnected ? Maybe only the ID is different. But the display is very useful and allow you to do manual adjustment for voltage and timing. The only tricky point is that it is off in night mode (no display)

[@patricelardeux4166]

@@okbabalola bonjour, j'ai le même , pas de soucis de fonctionnement, j'ai pu le comparer avec un blueSolar de chez Victron , résultat identique au niveau des performance et accès des réglages . ensuite j'ai connecté un cable ve direct USB fais maison avec un adaptateur usb ttl rs232 cela fonctionne , il as mis a jour le firewire en version 1.2 , par contre il le détecte comme un VE.direct MPPT contrôle www.wattuneed.com/fr/victron-energy/1761-mppt-control-pour-regulateurs-mppt-avec-vedirect-0712971130739.html

[@georgec9710]

Could you please let us know if the data connection works on this controller ? Thank you.

[@maclow5211]

It should but was not able to deep on it. Maybe it's needed to open and remove the connection to the embedded screen and for sure not use the victron sw...

[@georgec9710]

@@maclow5211 it's enough to connect the usb-rs232 cable and open a terminal (putty, terra term ...) and you should see data coming from the controller every second, no need to use victron sw for this, let me know if you need help with the details

[@54CHARM]

This is a counterfeit victron charger

[@andreask2288]

VICTRON 👍

[@elektirikleilgilihersey5776]

Son durumu nedir ? İnceleme Videosu bekliyorum