Hang Double Farm Gates - QUICK, EASY, NO MATH METHOD!

How to install double gates, often called farm gates or tube gates - but it will also work with single gates.
Flo-Fast GAS Tank & Pump -amzn.to/3FfPz5J
A Few Handy Tools for Putting Up Gates -
Auger Bit - amzn.to/3Ta4EvB
String Line - amzn.to/3J9ic5R
String Level - amzn.to/3ZEr76x
Gate Hinge Threaded J Bolts - www.amazon.com/dp/B01FIEAVH4/...
email: [e-mail]
Subscribe to the Channel: / @arrowjmfarms

[@arrowjmfarms]

I hope this video helps you out! Here are a few products I used: Auger Bit - amzn.to/3Ta4EvB String Line - amzn.to/3J9ic5R String Level - amzn.to/3ZEr76x Gate Hinge Threaded J Bolts - www.amazon.com/dp/B01FIEAVH4/ref=cm_sw_r_as_gl_api_gl_i_M719RRPPEYGCZ7VMEJGS?linkCode=ml2&tag=arrowjmfarm0e-20 Flo-Fast GAS Tank & Pump -amzn.to/3FfPz5J

[@markbyerley6967]

great video, explanation and commentary. Will use on my upcoming gate install. Thanks!

[@arrowjmfarms]

Thank you! Glad it helped!

[@Alan-ct3bo]

Very helpful, using this information to install first gate. THANK YOU

[@arrowjmfarms]

Awesome! Thank you!

[@simonmargetts4169]

Good job it will help me tomorrow when I am installing my double gates.

[@arrowjmfarms]

Glad to help!

[@hashbar8908]

nice .... keep it up )

[@arrowjmfarms]

Thanks! 👍🏼

[@rlboone7969]

Good job man... looks good

[@arrowjmfarms]

Thanks! I appreciate it!

[@HeritageFarmsTexas]

Nice project. Good job.

[@arrowjmfarms]

Thanks!

[@MadMan_3353]

how do you determine the rough opening of the gates? i'm looking to do dual 12ft gates but i cannot find information on what the opening width for post to post should be

[@arrowjmfarms]

You should make the distance between posts the actual distance. Factory made gates are actually shorter than advertised. So a 12’ gate might actually be 11’ 10.5” - each manufacturer varies a little. This is to allow room for hinges and adjustment. So for dual 12’ gates I would make my opening 24’ exactly. Hope that helps!

[@MadMan_3353]

@@arrowjmfarms helps tremendously thank you

[@joeimler9708]

How did you decide the correct width between the posts? Thanks

[@arrowjmfarms]

Thanks for the question Joe, that's one thing I forgot to cover! Width between posts should be the exact measurement for whatever gate or gates you're using. For instance, I knew I wanted two 10 ft gates for this project, so I made my opening 20 ft. For one 10 ft gate I would have made it a 10 ft opening between posts. I know specifically for farm style gates they take out a few inches for you to account for hinges, hardware, etc.

[@nicholastomberg8764]

Quick question where did you get that pump

[@arrowjmfarms]

Amazon. It’s a Flo-fast brand. They got stupid expensive like everything else but it’s been very handy for fueling stuff up! There’s a link to it in the pinned comment at the top.

[@robertbutler8004]

It would have been a lot smarter in grading the road on the high side of the gate.

[@arrowjmfarms]

If there was a road to grade then yes. But no road here. They are just pasture gates. Both gates swing both ways. The problem is one gate post is higher than the other, but it's still not really that big of an issue.

[@harleyguy932]

What gates are those? Manufacturer? Were looking for 2 10 footers

[@arrowjmfarms]

I believe these are made by a local manufacturer located in Paris, TX called Metro Gate & Manufacturing. Pretty economical gate and built well for the price. Our local feed and seed store carries them.

[@harleyguy932]

Oh sweet I didn’t realize you’re in Texas. We just bought property North of Kountze in the thicket.

[@arrowjmfarms]

@@harleyguy932 Nice! I'm actually just across the red river in Oklahoma, but Texas is close enough I spend time in Paris often.

[@boolitman65]

Nice job! You mentioned having fun driving posts, I’ve never considered that fun, what did you use to drive posts? Also, do you have a video of your “H” bracing install? Thanks!

[@arrowjmfarms]

Thank you! It was a little more fun than normal because I was able to use a new to me piece of equipment. That video is here: kzbin.info/www/bejne/Z6vdhH-GZtysrsU . I didn’t do video on these H braces I’m thinking I probably will as soon as I get a little time.

[@leelunk8235]

HEY WHY YOU STEALING GAS..I SAW THAT

[@arrowjmfarms]

You caught me! 😁