Hangar 9 Pitts S2B - Maiden flight and a happy pilot!! Never stop the RC

So i came out great with this maiden flight. During the first take off she leaned to the left and i had to give her a lot of right trim on the aileron. But after reading forum i found out that this is due to shipping all over the world. The body will twist and turn a bit. The CG on this setup landed on 145mm. The pitts has a wide range. The batteries was mounted under the tank. After the first flight we went over the plane to check for loose screws. I forgot to add lock tite on the alu bracket for the landing gear. but fixed before next flight. I love this bird and even if she is big she lands easy with low speed but giv a bit elevator after touch down. That will prevent a nose dive.
A big thank you to Markus for suport and help during flight and setup.
also thanks to Tore for handlig my camera. It's not the best camera to film with if you don't know it. A bit shaky but i think the video came out great,
This is what it's all about. unity and friendship and a passion for flying. 😍
Hope you all enjoy
Engine: DLE 60CC Twin
Servoes: 8 Spektrum A6380 Digital HV servoes
Receiver: Spektrum AR9110 Power receiver
Receiver Batteries: 2 GensAce 2Cell 4000Mah 25c
Ingition Battery: GensAce 2cell 2000mah 25c
Opto Killswitch
Radio: Spektrum DX9 Black edition

[@ArcticRc]

If you like our content please press the like button on this video. Then you will help us reach more people. 🥰

[@rcmaniac4561]

Well done 👍. She’s beautiful 🤩.

[@ArcticRc]

My new favourite😊

[@Chio_OB]

Majestic, so happy for you man! I've been a subscriber for years, you deserve more! Super sweet flying and what a nice plane.

[@ArcticRc]

Well we just have to produce more videos and hope to climb a little on the view count😂 It is great to have you with us my friend. 🥰

[@pega1ag171]

A great take off and a good landing wot a lovely little plane

[@DadsRCHangar]

Great flights, she a big girl and looks great 👍🏻

[@ArcticRc]

Thsnk you Sir😊

[@jm-fs8sp]

Awesome! , Excellent job!, looks great in the air!.

[@ArcticRc]

Lovely bird for sure🤩

[@kitchendevil123]

well done B .great first flight my bro !,well done .. love your channel .keep it up bro

[@ArcticRc]

Thank you very much 🥰

[@joesmith4222]

It's smaller than the original, but it's still a real airplane in my book. Very nice.👍

[@yowieP51]

Lovely aircraft Bengt! look forward to endless knife edge across the field i flew three of these a little smaller powered by Webra 61 but just as much fun.

[@ArcticRc]

Yeah i will fly it more after our vacation and try out cool stuff with this beauty.

[@spittz3939]

Beautiful Pitts!

[@ArcticRc]

🤩

[@xjet]

Great stuff Bengt. If one wing is good, two *must* be better :-)

[@ArcticRc]

😂🥰 I'll quote you on that my friend.

[@WarbirdPiLOT]

Gratulere med flott fly og vel gjennomført Maiden 👍👍

[@ArcticRc]

Tusen takk 😊

[@jan-rogergrandemo4481]

Grattis så my Bengt!! steika flott fly !! :-) :-)

[@ArcticRc]

Tusen takk Jan-Roger. Gromme greier🤪

[@jantvinje1957]

Nice :)

[@Ossy8618]

Wow😍

[@ArcticRc]

😊

[@tistarc9900]

Congrats!

[@ArcticRc]

Thank you Tista. Your videos and tips helped a lot. Did yours needed much aileron trim?

[@tistarc9900]

@@ArcticRc nothing visible. A few click probably.

[@ArcticRc]

@@tistarc9900 Ok. I need to re shape the wing supports. They dont fit the shape on the wings. Perhaps it will be better. 😊

[@tistarc9900]

@@ArcticRc interesting. Looking forward for more nice videos of your Pitts 👍

[@robertcovell2787]

Feels good doesn't it? I just maidened a 65 inch new build of a Cessna 150. Got a.61 2 stroke right now, maybe a 4 stroke later on if I can get one for a good price. She needed about 5 clicks left aileron and she's straight!

[@ArcticRc]

This one will get a Saito 61GF twin in july😊

[@robsycko]

mine has stay wires installed and it makes a lot of wind noise witch sounds cool.

[@ArcticRc]

I wonder why Hangar9 didn't add these to the ARF kit. The original one has them😳

[@robertjones1855]

What size prop did you use?

[@clubaeromodelismograncanaria]

😍😍

[@robsycko]

Were there stay wires installed or no?

[@ArcticRc]

No they did not come with this kit. But i think i can add them later.. 😊

[@user-fk3rk5ds3l]

Where you fly?

[@ArcticRc]

Norway. Trondheim