Hanging Drywall - Metal Stud Framing

[@dorianpaisley-smith303]

The studs are facing the wrong way. Should always screw the soft side 1st. Well the can face whatever way, as long as same direction but you should start boarding according to the way the studs are facing.

[@ruairigoat]

These lads are not full time drywall men... whats the lad on scaffolding doing lol... there are enough off them there to eat the wall never mind stand it.

[@rickscully9533]

I was thinking the same thing. You are more likely to have a bulge in your wall by rocking in this direction. Also, I'm hoping they are installing knock down doors in that office.

[@jakechimiak9626]

4 dudes on that sheesh y’all got money

[@m.o.mystics4308]

never seen 4 people hang one wall

[@VCGConstruction]

+Bryan Parker thanks for watching!! Don't forget to Like, Comment, Subscribe, and most importantly Share this video!

[@kevenweaver9266]

Seriously LOL. I hang 10-12' boards all day by myself and stuff/top/caulk them and my foreman would go ape if I only put up 30 sheets

[@VCGConstruction]

God bless you Keven, you’re a beast!

[@jamskof]

its much more effective when you have this much space to cover

[@Bmanfresh]

Lmao right.

[@shawnspringall]

the office looks like its really coming together

[@VCGConstruction]

+Shawn Springall thanks a lot, the guys are doing a great job!

[@MrTeff999]

To whomever made this video: how replacing the crappy music with a bit of useful narration.

[@thebloopsound4241]

Yeah. What Mr. Teff said.

[@jasonbrown347]

I want to at this place! 20 gauge all day and the whole crew helps hang a board

[@shaunkenny7619]

Takes one person to carry and stand up one board and one person to fix it atleast 60-75 boards a day easy I almost fell asleep watching this haha

[@BayAreaMCs]

shaun kenny glad I’m not the only one haha 😂

[@t.vaimaona7219]

I know I have too cut and stand the rock and use a jack too lift off the ground and all they got it made here on this video

[@johns6119]

It was slow, to many guys for the job. Why are you using glue on the studs, I never did that or seen that. I believe you guys are overdoing it. Thanks for the video tough...

[@stevennoyb4595]

Could be sound attenuation.

[@ckgaming5966]

Slow! What's with the epoxy?

[@kikeeeee18]

I’ve never seen 3 people handle one sheet.... lol

[@TubeQuestions]

nice timelapse

[@VCGConstruction]

Thank you!! I really appreciate it!!

[@TubeQuestions]

:) you're welcome!

[@kevinjohnson5214]

Didn't even break a router bit . Figure out the electrical later f. The electricians if they can't keep up. Let's wrap it and head to the bar & tell everyone about how much board we hung .

[@raulmunguia2027]

Even in fast speed it looks slow... haha... I'm sure it's good work, but too many guys waiting around at one time :).... must be well paid per hour type of job.

[@VCGConstruction]

Thanks for watching!!

[@rjw261984]

Looks like they are working on their own shop. Prob was a "all hands on deck" for employees. So in my opinion of course they are gonna bullshit a little. I imagine they work diff on a customer jobsite.

[@bihlover80s33]

I would say those guys love this kinde of music while acting like pro drywall installers hahahahaha 🤣🤣🤣

[@TsunamiDreamJesusIsLord]

Can you double up on your drywall sheets over metal studs?

[@VCGConstruction]

Sure you can

[@ckgaming5966]

You should be able to hang 70-100 sheets a day, we do on average 60 a day and that's with 2 people.

[@rickscully9533]

Yep! I've installed three layers on both sides before.

[@KT-ym1cn]

I see cracks in the drywall near that door in the near future. Flag cuts.....

[@christophercruz4479]

That took forever !!! And 4 guys 2 guys could do that and fast

[@mjc8761]

Looking good!!

[@jrrodriguez1303]

4 vatos para esto 🤔🤣🤣🤣👍🏼

[@VCGConstruction]

+JR Rodriguez muy bien ¿verdad? ¡¡gracias por ver!!

[@raulmunguia2027]

JR Rodriguez asi es la union... haha... un wuey en el scafold asiendo nada

[@skreetfilms2242]

What kind of screws did you use for the drywall going into the metal studs?

[@VCGConstruction]

+Skreet Films fine thread drywall screws. It's also important to use drywall adhesive as well

[@skreetfilms2242]

Thanks alot for the info, im starting on my project. hope mines looks as sweet as Yours turned out. Thanks again.

[@VCGConstruction]

+Skreet Films let us know how it’s coming along! You can post some pics and tag us on IG!

[@wdnspoon]

Did you use pilot holes, self-drilling, or just the regular pointy kind?

[@VCGConstruction]

Standard fine thread drywall screws

[@jasonsilvestre5530]

Any specific screws you guys used?

[@judilyn48]

when I drywalled it would crack where the screws were on the studs . how do you avoid this?

[@jayfr33_cloudzzz7]

use a dimpler, it might help

[@andykastillo6468]

Anyone here knows about the price for sheet or sq ft commercial drywall hanging thanks

[@honda9731]

How expensive/cheaper is metal compared to 2x4 stud? and what its advantage over the other during construction?

[@VCGConstruction]

So metal studs cost about 15% more than wood studs. But they will save you money when it comes to the benefits. Metal studs are a lot lighter than wood, put up with screws, so they are easier to replace if you make a mistake. Wood swells and expands, metal stays constant. Wood can rot or attract insects. There is also a lot less scrap when using metal studs as apposed to wood. Hopefully this helped.

[@honda9731]

VCG Construction I'm taking it from an expert, good points buddy, thanks :)

[@renaissancemen1]

VCG Construction and they are ALWAYS STRAIGHT!!!!!

[@rickscully9533]

Metal studs are way faster to install. You need less equipment as well, unless you are on a huge job. Then you will need a chopsaw. If it's a DYI all you need is a pair of snips. When framing a wall you have a bottom track and top track. Then the studs slide tightly into them. Also, metal studs are NOT lighter than wood studs. You have a plethora of different guages you can pick from. As 25 guage is like a pop can, then you have 10 guage wich is like a I beam.

[@mikecioka1180]

Nice video but useful as you needs to guess what to do.

[@jasonvasquez3088]

You guys must have just started. If you ever showed up on any job site where I’m from and moved like that you wouldn’t be coming back. I got 20 year old kids that would run circles around you guys. Is this for real.

[@jonbeth44]

where and how is the drywall? wrong title.

[@joemarie83]

Sir, do you put timber inside the both studs of door opening? Is it ok if i dont put mine?

[@CHAOSMOVEMENT]

I understand you're just showing you all do it, but I came here thinking this was a how to video.

[@ericromo1010]

That’s a lot off people for a small job like that

[@rafaelflores899]

Four plus 12or 15 per hr I guess it's still cheap.

[@VCGConstruction]

Thanks for watching!

[@antonylopez5742]

took 4 guys to do what 1 guy could of done.

[@VCGConstruction]

Thanks for watching!!

[@antonylopez5742]

VCG Construction no thanks for sharing

[@monawarrajayki5445]

Is this the begging of it all?

[@VCGConstruction]

Nope we have really terrible videos from over a year ago!! 🤣🤣🤣

[@anthonymccormick40]

4 Guys And They hung the drywall wrong with the stud layout

[@VCGConstruction]

Thanks for watching!

[@latinoazul4810]

Qe pistola es la mejor para atornillar en metal la dewalt 255? 257? Oh 272?

[@VCGConstruction]

¡Cualquiera que haga el trabajo!

[@latinoazul4810]

@@VCGConstruction ovio por eso pregunto cual es no voy a comprar 30 pistolas para ver cual sirve

[@jimc8121]

so is this video supposed to help me?

[@billpaliwoda5012]

Well that video provided exactly no information

[@mateuszuler7564]

1 straight wall and 4 persons!!!!??? WTF?? Money becouse of YT not becouse of Job otherwise 3 of them have to work for free

[@RedCellSpy]

Holy crap! Takes 4 people all day to move one sheet of drywall? Well, that's Union labor for ya... 🤷🏻‍♂️

[@kingjoey9277]

RedCellSpy I’m a union guy and we are mandated to carry sheets of drywall solo 💯 these are your non union guys trust me

[@tessastone9420]

This is showing us absolutely nothing

[@josecollazo3545]

Ridiculous

[@ricardogalvan7064]

Can't learn nothing with fast video wtf

[@chuckglen6814]

That was lame sucka. Us Arizona guys could have hung and finished all that in about 3.5 hours one guy.VCG construction must stand for Very Corky Guys doing drywall.LOL

[@jaimechavez1941]

I wasn’t a big fan of VCG you shouldn’t video something you are not pro at. Guys like me a 20 year metal stud vet will pick apart your work. Get a pro to help. Maybe they could narrate. I would gladly offer advice or help even share video with you. Sorry man but I’m kinda bummed.