HappyModel Mobula6 2024 VTX noise

[@shogunemperor]

Thanks for highlighting this. Do you by any chance have a spare antenna you can swap? (Just checking if that is the issue) Im kinda researching this too. I've swapped my antenna to the Maple Wireless Omni Directional and it definitely was much better than the dipole. Please let me know!

[@tane388]

Hey, I tried other classic whoop antena but its same. On same yard, mobula 7 elrs on 25mv getting great signal, almost no breakups. But you saw, its absolutely the same on 25 and 400mv, its look like vtx does't change power, look like its stucked on pit mode.

[@im_ricebowl]

interesting to see that you dont have the same degree of noise I did on mine and others as well and that it wasn't randomly rebooting XD. When it comes to the VTX, it does seem to not have much of an effect. I found with mine, some settings only occur when I remove and place another battery. anyhow, seems like every batch of the 2024 has issues of its own XD. Great Cruising btw fam!

[@tane388]

Hey bro, did you fix vtx noise? For the rebooting issue, happymodel suggest to reflash with bluejay 17 version 96khz. Thanks for steping by ;)

[@im_ricebowl]

@@tane388 sad to say but I've had no luck with it - atleast with my 2024. I've spoken to loads of pilots. Some people had good luck and there was minimal noise. Some were like me and swapped cameras and still had static. Looks like it's inherent to the super x aio itself. I got a suggestion from a friend to add a capacitor somewhere in the aio but I don't trust my soldering skills XD I honestly am a little tired of trying to fix the mob 6 😂 I've heard so many different solutions - some were what HM told concerned pilots to do. Tried a lot of methods and talked to lots of people. I may try that but mine is working fine rn with my own personal setup so I may just keep it like that XD. I'll keep that in mind tho - I'll bring that up with a buddy of mine who is still testing things. Thanks man!

[@tane388]

@@im_ricebowl I have tried different antena, but now I am sure vtx is stucked on same power, RCE or 400mv is the same noise and same crapy range.. I hope some1 will came with fix :)

[@JustForUs-c9m]

Same issue. Noise when arming the motors. It looks like it's an AIO issue. Nothing can be done, except swapping the AIO to a newer batch one. I bought mine used on Ebay, and I've asked for a partial refund. If the seller disagrees, I'll just apply for a full refund and send it back. Shame, I do like how it flies indoors.

[@tane388]

Its look like half of the first batch has vtx issue, what a shame for such a big and famous company in fpv micros..

[@doodgeslagenmug]

Mine just drops out of the sky at the beginning of a battery. These mobula 6’s are faulty as can be.

[@tane388]

@@doodgeslagenmug oh unfortenetly they are.. Try reflash bluejay with 48khz

[@doodgeslagenmug]

@@tane388 i did but it still does it sometimes although less often. Even sometimes after a few minutes of flying it still just drops, really unreliable which is annoying if you happen to fly outside above a tree or some bushes. Thanks for helping out btw :) Hope Happymodel finds a fix and releases better units soon.

[@tane388]

@@doodgeslagenmug I hope they will fix it with some update.. cheers🫡

[@KwadzUK]

Try a different band.

[@tane388]

Tnx for advice, but allready did