Happymodel SPI FC binding process | SuperbeeF4 | CrazyF42G4 | X12 flight controller

Happymodel SPI FC binding process | SuperbeeF4 | CrazyF42G4 | X12 flight controller remaking this video for those with binding issues on the Happymodel flight controllers with the ELRS V3.0.
I hope this video helps in any of the above mentioned flight controllers and you guys are able to get yourself flying in no time.
Should you need any help, please feel free to drop in on our discord channel or comment below.
Join my discord
/ discord
Happymodel Website
www.happymodel.cn/​
Happymodel Official Team Pilots.
www.happymodel.cn/​
And of course not forgetting my teammates KZbin channels:
Nathan Loopz
/ @nathanloopz6175
Joseph De Guzman AKA 'Jiggy'
/ filmonjiggy
Tristan Teft AKA 'TDogFPV'
/ @tdogfpv

[@apachesmokewoundedsniper]

Great video, nice explanation.I switched to quicksilver because I couldn’t bind at that time. Nice that there is new firmware which support 3.0

[@shogunemperor]

aaww thanks bruddah. Much appreciated. Yeah, Quicksilver works well. Im sorry I didnt do this sooner!!!

[@Eagle__1]

Good video. At 2:45 I would also recommend saving a preset backup before flashing

[@shogunemperor]

aaww thanks bruddah!! OH YEAH!! Totally forgot to mention that!!!! WTH!!! Thanks for the reminder bruh

[@CostaFPV]

Boa noite amigo. Obrigado 😀

[@shogunemperor]

haha boa noite bro!!! Obrigado por pasa por aqui!!

[@fitrawhy]

hello. i need your help. yesterday i bought x12 elrs. i already flashed esc to bluejay 48 pwm. but all my motor just twitching when i test motor at the betaflight. please help Me

[@shogunemperor]

Hi bro!!! Please boost the rampup or start up to 1105. It is a bluejay thing.

[@Krash_fpv]

Im having a hell of a time on mobula 7 with frsky spi....i even have a xrsx serial rx and got it bounf but wont show stick input on betaflught

[@shogunemperor]

Hey Tory, Scooter Pie sent u his video link on your post in the official group, here it is in case you missed it. Hope this fixes your issue. kzbin.info/www/bejne/goivf6N7lLicjKM

[@1Samuel1524]

I recieved a moblite elrs hdzero and the board looks different and i don't see that dfu mode button

[@shogunemperor]

bro!!! Ur Moblite7 HDZero is using the SuperbeeF4 lite Flight controller. www.happymodel.cn/index.php/2022/07/28/superbee-f4-lite-aio-flight-controller-elrs-frsky-version-for-1s-tiny-whoop-drone/ PLEASE CHECK!!! Unless you're using a new FC then it will be the SuperX FC

[@jonathanmcwhorter1353]

I'm trying to bind my mobula7 1s spi with my tbs tango 2 pro multiprotocol module and I've had zero success. My mobula7 hd 1s bound first try. Is the process the same if you are not using the elrs? And one more question if I may.. Is there a term for having the spi elrs combo and using the spi opposed to the elrs? I'm honestly still trying to grasp it all! Thanks for your great content 👍

[@shogunemperor]

aaww thanks bruddah. Ok, so I'm assuming that the Mob7 is the ELRS version? U will need the ELRS TX for it on ur tango2. An multiprotocol module wont work. Unless ur using the Frsky Mob7 then u'll need to connect via Frsky D8 or D16 or XJT. Binding process is physical. So u need to press bind on ur radio and then plug the lipo to the mob7, press the bind button on the Flight controller then u should be good to go.

[@jonathanmcwhorter1353]

Thanks for the reply 👍 turns out it's elrs and my hd is frsky so operator error 😆 Thanks Again

[@shogunemperor]

@@jonathanmcwhorter1353 awesome man! Glad u found that out! Hope u get it working. Happy flying bruh! And its my pleasure!!!! Always here if u need me!

[@knightdeluxegaming]

What camera are you using in your mobula7? its pretty big lens lol

[@derelictfpv]

That could be a Caddx Ant.

[@shogunemperor]

oh!! That one is the Runcam nano 4! Here's the review of that camera:- kzbin.info/www/bejne/bJvZmoZoe66brqM

[@shogunemperor]

@@derelictfpv hahha that was the runcam nano4 from when I was flying in Seoul. its got a slightly bigger lens

[@gabormihaly667]

I have the same Crazy f4 FrSky and it doesn't work. No binding.

[@shogunemperor]

@@gabormihaly667 im assuming ur on ELRS V3? Have u flashed it with the hex file like i mentioned in the video?

[@gabormihaly667]

@@shogunemperor yes

[@gabormihaly667]

@@shogunemperor I must have overlooked something, I'LL try again.

[@shogunemperor]

@@gabormihaly667 good luck bruddah. Let me know if u have issues

[@gabormihaly667]

@@shogunemperor ok! Thank you!

[@administracionelbuenbar7862]

Que dolor de cabeza con esta cochinada

[@shogunemperor]

es simplemente un sistema diferente. Uno se acostumbra. Por supuesto, no es necesario que consigas uno. Simplemente quédate con aquello con lo que te sientas cómodo