Harbor Freight Bed Unloader Modification

[@PainterD54]

I just screwed a piece of 1" oak wood across the back so it will grip everything and pull it out. It really helps if you have a plastic bed liner in your box. You are then able to pull out over a ton of material! I doubled up the material and screwed with large body washers to grip the fabric.

[@sandhollowhomestead6972]

I've also put a tarp under the unloader belt laying over the sides and reaching just over the tailgate. Only a small amount is left on tarp. When done just pull tarp out and bed is clean.

[@EdenLawnServices]

Wow, a local youtubber!!! Hard to find around here. So far the modified bed unloader works great!!! Subbed back.

[@cleancutslawncare]

Exactly. That’s what I do. Then easily pull the remaining debris. Nothing left in the bed.

[@KenMrKLC]

I did this same thing before with my load handler, but ultimately found it easiest to connect a long pipe with locking collar and large washers with pvc "rollers" cut the same width of the top of the bed rail so the tarp actually goes up the back of the load to the top of the bed, then when you unload it cant pull down it just rolls across the top of the bed rails. Also makes it super easy to set it up before loading

[@EdenLawnServices]

Great Idea!!! That may be version 2.0!!!

[@599javier]

Any video how you do that?

[@BillyGoatLawnService]

Awesome! Simple modifications makes all the difference.

[@gergemall]

Gracias amigo, I’d love to see it in action .

[@EdenLawnServices]

I’ll try to make a vid in the future!!!

[@GuitarNewby]

They need handles on both sides so that two people can crank in tandem 👍.

[@EdenLawnServices]

I’ve handled 1500 pounds solo with it

[@ThatsRightLawnCare]

Looks like a pretty easy mod! Hope it works like it should. Great video Doug!

[@EdenLawnServices]

We will see how well it works in the morning, I have a giant load in the truck!

[@Wakeupandsniffthecoffee]

Just bought one yesterday for my 2004 Dodge Dakota and the tailgate is about two inches too narrow. I saw another KZbin where the guy cut the cloth about 2" and that gave him enough room to fit the brackets on without them hitting the truck bed edges. Watching your video, while setting up to modify mine. Im thinking that if the 2x4 is left long enough to sit on top of the sides, then attached to the end, it won't be able to slip down and should slide forward with the load. Another comment mentioned putting that set up on rollers mounted to the top if the bed sides. Which is probably ideal, but more stuff than I have on hand.

[@KenMrKLC]

On a similar note, I have the load handler pro which is all metal brackets.... I have seriously considered bolting a small harbor freight $60 winch to the bracket on one side and connect to the main pipe with a sprocket and chain setup..... Just imagine how nice that would be to push a button and watch it all come out rather than cranking.... It could def be done well.... I am very close to doing the same for my heavy bulldog jack on my dump trailer.

[@EdenLawnServices]

If I had a dedicated work truck I would have a mechanized or motorized version, probably a dump bed insert would be best.

[@KenMrKLC]

@@EdenLawnServices hey, don’t underestimate those tarp unloaders...... they are enough for a good chunk of your needs

[@EdenLawnServices]

@@KenMrKLC I ran it most of the year last season. It’s a great tool that saves a bunch of time!!!

[@KenMrKLC]

@@EdenLawnServices yea for sure... I’m using anything and everything that helps out my work day. Whatever gets that job done..... I functioned for many years without any dump device

[@frankc6430]

with washers gives you better bigger grip to the fabric

[@EdenLawnServices]

It has washers and is sandwiched between to 2 x 4’s.

[@atrocitiesuponcities7443]

Great Share Amigo!

[@EdenLawnServices]

Thank You!!!

[@kyleclarkeee636]

When you drive does the back tarp move or anything without velcros on it? Also when ur done what to do you now that you have wood cause you want roll it up so just leave it past tailgate or? Just bought one yesterday!

[@EdenLawnServices]

Kyle, without wood on end, I would use Velcro. The tarp will unwind while driving. With wood on tarp I just let it unwind till the wood hits truck bed when tail gate is closed. The weight of wood keeps tarp from moving while driving!!!

[@webcrawler3332]

How has it worked? Any vids in action?

[@EdenLawnServices]

I made a video a last year showing it in use. It’s saves time and the back!!!

[@bradleykornele]

Do you have video showing how mod worked

[@EdenLawnServices]

I do not but take it from me, it works great!!!

[@waymakerlawncare931]

Doug that will save yall Backs

[@EdenLawnServices]

Yes it does, I ran it last year as well. Huge time saver!!!

[@grasshoppercrews1296]

What no chain saw involved wth double cut doug 😊 🤣🤣🤣

[@EdenLawnServices]

Actually using it this week and a small tree that got blown over in a storm.

[@TheLoobis]

I have that unloader. I'm not liking this modification.

[@atrocitiesuponcities7443]

Great Share Amigo!

[@atrocitiesuponcities7443]

Great Share Amigo!