Harbor Freight Central Pneumatic 50lb Portable Abrasive Blaster Unboxing, Demo, & Initial Review

[@puddleduckist]

I just bought one and some walnut media to clean my valves on my mazda! Nice demo, thanks for sharing 👍!! I used a coupon and it was 26.00, can't beat that price!!!🎉🎉🎉🎉🎉

[@Mbehr24]

Where did you get the coupon

[@ronaldpoddig6188]

I'm fixing up a 1967 Chevy K10

[@sabotup7442]

Excellent tutorial-well done. Thank you so much.

[@michaeldehart648]

this looks like it would be good to use on my offset smoker; thanks for sharing!

[@frank03s]

I got same one different name, but use 50ltr compressor, once it's setup its grand. Just FYI very important to have the cross drilled holds in the brass fitting on the side exposed. Oh and I had to run a drill through the feed hole for abrasive, because of burrs in the gun, simple enough

[@brokeeastmeet]

great info, much appreciated!

[@jimdina2943]

Thanks! Great tutorial! Would this be suitable to strip and repaint aluminum car wheels?

[@DieselLegiance]

It’s possible. If it’s a one time thing, maybe, it may just take a little while. If stripping wheels was a business and you were doing it more than one time, I’d say get something bigger and better.

[@LandonVongogh]

Very helpful vid. Thank you!

[@810Metalworks]

Would this remove mill scale from steel?

[@inspectr1949]

Thank you, need to blast the rust and paint off 2 tractor rims gonna need a bigger blaster.

[@eprohoda]

Matt-that iss amazing . all the best-))

[@Gots2bBRYBRY]

8 minutes and you finally got it out of the box come in y'all talk to much

[@abuahmad67]

I wonder how long it would take to remove rust from a Wrought Iron gate

[@DieselLegiance]

Depends on the size/length. If it’s a big fence, you probably would benefit by a larger unit with a larger compressor.

[@mariojalata5259]

I have the fortress 4 gallon 4cfm 200 psi air compressor. Will this work with this blaster kit?

[@DieselLegiance]

It should, but I assume your compressor will constantly be running to keep up.

[@ronaldpoddig6188]

I put a 90° connect for the hose

[@TheDesertRat31]

Would regular play sand work? I have a bag just sitting in my shed.

[@DieselLegiance]

It’s possible as long as it was 100% dry.

[@jayriehle1473]

I tried scrolling through comments to see if this has already been asked. Did not see…do you know if dry ice medium can be used with this product?

[@TeresaJohnson-ew4us]

What model inline desiccant dryer filter is this from harbor frieght i neest the exact same one i need #

[@Mbehr24]

Can you effectively use soda with this unit? Or something similar that will take paint off wood?

[@DieselLegiance]

I would assume so.

[@relaxingrealityescape5336]

WhT size compressor did you use?

[@DieselLegiance]

27 gallon 200psi max Harbor Freight

[@mariojalata5259]

Ok I will call shortly

[@Balasubbarayan]

I was going to use soda as a medium. After seeing your video I thought I could try coal slag. But the safety data sheet is pretty scary. This thing is similar to sand in terms of health risks. I initially thought it was powdered coal but this is slag out of coal burned for energy and the list of minerals and chemicals is concerning. Do you use this media often as you didn't seem to use appropriate protection in this video. Just trying to get some facts and also your usage experience. Thanks.

[@thebyrdsnestcc5141]

I have 4 bags of playsand from home depot that's been kicking around the house for awhile...I was wondering if you think I could use that as a media before I go buy this machine?

[@DieselLegiance]

If it's 1000% dry then probably. Moisture ruins all media.

[@kiesha104]

So, when using sand be advised a good respirator is absolutely necessary.. sand contains silica.. A day at the beach is fun, major lung issues, not so much....

[@beardedprepper8606]

You're shake your hand too much. Just move with smooth motion and not shaking.

[@ghostses]

Do you steal everyone's shit, or just mine?

[@DieselLegiance]

Please explain? I’ll wait!