Harbor Freight Fortress 1 Gallon Ultra Quiet Air Compressor Necessary Accessories & Setup

[@geneparcellano]

If you're here for the necessary accessories jump to kzbin.info/www/bejne/rGnIlX2Pm9asnq8

[@richardturk7162]

I have had the 2 gallon 1.5 horsepower and its a great unit. I have never had any issues with it. I have had it 3 years now.

[@The0nionKnight]

I've had mine for about 8 months now. Still going strong, I absolutely love it.

[@orion000]

Year later? How is it holding up.

[@The0nionKnight]

@@orion000 still going strong. The kids loved using it this past summer to blow up their pool float toys and water slides.

[@MrGwizyadig]

Can you use it for framing a house with framing nailer?

[@The0nionKnight]

@@MrGwizyadig I wouldn’t. It’s not big enough.

[@MrGwizyadig]

@@The0nionKnight how big would you recommend?

[@ledbelied5771]

Thank you finally figured out why i can’t connect the hose lol. This is the 5th vid i watched and the first to mention the female plug. Thanks so much

[@geneparcellano]

Happy to hear that 👍

[@2aminitials]

3:05 You said the tank would burst if it got hot with air pressure in it. That's why there is a safety valve that you show at 3:28. The safety valve also allows the pressure to release it the compressor stays locked on past it's cut off pressure. If you need to release the pressure quickly open the drain on the front, it's easier to get to.

[@geneparcellano]

Thanks for the info, I was not aware of that.

[@dubmob151]

Don't use the pop off valve to release pressure, you won't get the benefit of draining the tank that way.

[@corrinlc]

Great review. Your detailed explanations are very useful for most compressor owners. ☆☆☆

[@geneparcellano]

Glad it was helpful!

[@ckinard2]

Thank you so much for making this informative video This is exactly what I'll be using if for the air gun attachment. I am a barber so I'll be using it for that application to dust off the hair from my customers because in my state neck dusters are banned and illegal so this will be perfect to use a air gun with a compressor thank you so kindly keep up the good work and keep the vision.

[@geneparcellano]

Thanks for the feedback! Glad to know it was helpful, take care!

[@delgadozj]

I’m looking to find one for the same thing, is it loud?

[@zbvtools]

Dude awesome video. I need this to clean out tapped screw holes.

[@timfetters5115]

Best to connect your air hose before you turn the compressor on. There are several reasons for this; it’s safer, it will make your compressor last longer, and it will make it easier to plug the hose in. You don’t have to do it that way but it is generally better practice.

[@eheheh3263]

Connect the hose when breaking in the compressor??? I’m thinking of getting this compressor and would appreciate your advice

[@thedoctorlee]

This was very helpful, thank you!

[@timurzi6434]

Nice! I've got 2 fortress air compressors that don't work very well. I didn't break in :/ hopefully that helps. Thanks!

[@olenaerhardt7725]

Do you know how to remove an air filter on Fortress? It says (page 10) you need to clean it every week. I found where it is located (on the right if you face the compressor, it has a small transparent hose on it's cover), but not sure how to remove the cap from it. Thank you for your film again.

[@geneparcellano]

I actually have not removed the filter since I got it 😬. It’s functioning fine, but good to know that I should be cleaning it. I’ll take a look next time it’s not freezing in the garage.

[@olenaerhardt7725]

@@geneparcellano Many people even don't know about that filter, everything is working great, it is a good compressor. I also plan to open and see where is that filter. There are some notches which should be bent or smth to remove. I'm using that compressor very occasionally (primarily to seat the beads in tires and to clean engine bays), but still good to know about that filter and clean it sometimes. Thank you for your film again.

[@lopez8871]

You should of used the nailer a couple of times to see how many nails you can fire off before it turns back on?

[@glennmaxey1373]

GREAT DEMO! JUST WHAT I WAS LOOKING FOR.

[@geneparcellano]

Glad to hear it's helpful. Thanks!

[@olenaerhardt7725]

What hose would you recommend to seat the bead on the newly installed tire (1/4" or 3/8")? And if you could tell the setting on the compressor for that procedure and corresponding set to buy. I changed my 1st tire, but couldn't seat it on the bead yet, since tried to use a small tire inflator. I was planning to get a small pancake (for 6 GA) compressor, but after this film think that maybe Superquiet 1-2 GA Fortress compressor will work for that task. Does it matter for that project 6Ga or 1Ga? Thank you for the informative film.

[@geneparcellano]

Hi Olena, I'm afraid I won't be able to help with your questions. I've tried inflating my car tires with this unit, but it was unsuccessful. Maybe thee 1GA is too small, or maybe I just do not know what I'm doing. I also feel like I do not have the right attachments for it. So I ended up just taking it to the gas station to be inflated. Sorry. I hope you're able to find the answer you are looking for. Take care.

[@olenaerhardt7725]

@@geneparcellano Thank you. It is good to know that as a last but one resort you can go to a gas station (I was just kept in mind a mechanic). I decided to keep 1 Ga Fortress (light and quiet). I also assembled already a new Bead Seater, tried it (not on tire, just in air), everything works fine, so hope on it. I filled it's tank w/same small tire inflator, since didn't open Fortress yet. But when you went to gas station w/that empty tire, did you place it vertically or horizontally before inflation?

[@olenaerhardt7725]

@@geneparcellano You know it did it, just that small 1Ga compressor. I thought I'll try the Fortress and set up everything for the blast fm/Bead Seater and compressor, and while I was trying on the tire the work of the compressor the tire (R16, passenger car) set in about 30 sec. I set the compressor for ~60 psi (the air flow increases on small pressure). It is a great compressor, I'm glad I bought this one, thank you for your film again.

[@geneparcellano]

@@olenaerhardt7725 Oh wow, that's great to hear. That tells me that I have the wrong accessory. So glad to hear that it worked out, and thank you for sharing the settings and your experience. Very much appreciated!

[@olenaerhardt7725]

@@geneparcellano My pleasure. Now I'm working on balancing the tire (also w/HF balancer). Almost ready for 3 other tires. Thank you for your film again, it was helpful for me to choose a proper compressor and see how to set it up.

[@scraplifelivingthedream4331]

I am getting the 4 gallon one. Contractors r loving it.

[@Iahusha777Iahuah]

That's not the quite one

[@SkyHawk2729]

Can this fill a truck tire? Obviously not in one full tank but while it continuously runs?

[@geneparcellano]

I actually haven't been able to use this to fill a car tire. I just realized I have the wrong size connector for pumping tires. Somebody else in the comments have been able to use it for tires, and they said it's worked, but I've yet to try it.

[@stallionblade1443]

Thanks for uploading it. I'm also planning to purchase this and trying to decide between the 1gal and 2 gal. I will also be using it for woodworking mainly, brad nailers and to blow off dust. Have you been satisfied with the 1 gal so far?

[@geneparcellano]

Glad to know it was helpful. I've decided to keep the 1 gal, it's been more than sufficient for my needs. I also really like the portability. It's a lot easier to lug it around the house.

[@BHShaman]

Hi, can you change out the couplers? Say to the Kobolt High Flow from Lowes? There is no backing nut to hold the air tube from twisting.

[@geneparcellano]

I'm not sure about this one, I'm not familiar with the kobolt's size. However, if it uses the standard size, it should work.

[@alexanderlitster2215]

Thanks alot. Very helpful to get it setup

[@geneparcellano]

You're welcome. Glad it was helpful!

[@t54760]

Hi Gene. I was about to buy this model for my airbrushing. Can you tell me how it's worked for you over the past year? Any issues or suggestions? Thanks!

[@geneparcellano]

Hi Tom, it's still working great for me. I just used it with a brad nailer to install baseboards in two rooms, yesterday. I've never used it for airbrushing, so I don't know how well it will work for that purpose. The light weight and quiet motor has been a big plus for me.

[@t54760]

@@geneparcellano Thanks for the reply. So it's functioning well, good to hear. How many estimated hours of using do you think? Trying to get an idea of the longevity. Thanks again.

[@geneparcellano]

@@t54760 I'd say I use it about an hour every other week, since I got it last year in August. Mostly for nailing and blowing dust off of work spaces and equipment.

[@t54760]

@@geneparcellano Thanks!

[@itlog366]

Does that knob do anything?

[@geneparcellano]

You can increase/decrease the pressure using the knob.

[@FrankConour]

Wiring schematic Forthe compressor

[@ThatGirlLex17]

THANK YOU!!

[@Michael-ri2eh]

🎉🎉 You should na GRATEFUL YOU DID THE VIDEO THANK YOU

[@stigmautomata]

Thank you so much.. the manual was basically like "OK connect it" lmao

[@geneparcellano]

You're welcome!

[@orion000]

How is it holding up?

[@geneparcellano]

Still working as the day I bought it. Hopefully it lasts at least 10 years.

[@jesusisaliberal548]

I can't hear you over the crackling plastic wrapper of that friggin' polyurethane air hose! ;-)

[@eheheh3263]

Is the 1 gallon compressor an aluminum tank???

[@geneparcellano]

I'm not sure actually, I don't see any information on this in the manual and it's hard to tell from tapping it.

[@mattbova1138]

Did you stick with the 1 gallon or did you upgrade to the 2?

[@geneparcellano]

Matt, I stuck with the 1 gallon. I'm glad I did, since I had to lug it up 4 flights of stairs recently and the light weight really helped my back. It does come on often when I'm using it for the nail gun or blow gun, but since it's so quiet I don't mind it too much.

[@Ironmurs]

2nd time using mine...reset button keeps popping. Will not continuously refill. Thought it was running hot, out a fan on it, still popping. Hot garbage. Any suggestions?

[@madscientistkicks]

Anyone use this to fill up their cars tire? Don’t expect to go from flat to 30psi in one fill but would be nice to hear anyone’s experience

[@geneparcellano]

I haven't tried filling up a car tire yet but would love to hear other people's experience as well.

[@MrBoonetang]

I specifically bought this model air compressor to fill car and motorcycle tires, works perfectly.

[@david-oj5tr]

Sirbe para pintar poco?

[@geneparcellano]

La verdad no sé, aún no lo he probado para pintar.

[@readmore3634]

just wanted to hear it...thx

[@larrysmoove9653]

Is it strong ?

[@geneparcellano]

You can change the strength by adjusting the PSI dial. I usually use less than half of the maximum PSI in the meter.

[@coolhardware65]

i luv mine super light super quiet.

[@Nick-we7lf]

Loud as hell !

[@geneparcellano]

😂 it could be my camera's mic.

[@tikofann5884]

Actually, it’s very quiet. It barely makes any sound. Quieter than a hairdryer.

[@coppulor6500]

They are ultra quiet

[@methodical_66]

Geezus....please take the plastic off the blow gun hose...Freakn annoying sound

[@lexandersantana8089]

It’s $130 when a husky 1 gallon is $100

[@geneparcellano]

If you can get the Husky for $100, definitely go for it. Sounds like a good deal. I went with the Fortress since I could just drive over to HF and pick it up, also returning it locally would have been convenient for me if something went wrong. The Husky was also not available locally earlier in the year when I needed an air compressor.

[@scraplifelivingthedream4331]

The Fortress brand is better then.Husky. Go find a quite Husky brand for $130' U never will.

[@pablop9495]

It cant be compared because is he was to buy a HUSKY with the same expectations of this FORTRESS it will be more money... And that $100 husky which you probably are talking about the pancake is like $50 at harbor freight