Harbor Freight Tool Box Workbench Assembly & Review

Harbor Freight Tool Box Workbench Assembly & Review | Yukon 46 Inch

Рет қаралды 16,584

Күн бұрын

Пікірлер: 49

@lbowsk 7 ай бұрын

Just picked one up on sale for $289 in March of 24. Watched several vids. Good enough for me and within my budget. Score.

@NicholsCounty 7 ай бұрын

Great.

@paulchavez2009 6 ай бұрын

What do you think so far?

@lbowsk 6 ай бұрын

@@paulchavez2009 Love it. The liner sleeves are worthless, but better than nothing. Will eventually replace them. Heavily loaded drawers slide just like empty ones. I can't see a reason to spend more for a tool box. Save money for more tools. Would I like a MAC box? Sure. I'd also like to have a nice waterfront home in the Keys and another on the Maine coast, a super model GF, a Ford GT, a 34 inch waist, a nice farm, etc etc etc.

@NicholsCounty 6 ай бұрын

@@paulchavez2009 I like it, I use it in my warehouse so it doesn't really get abused. Just a box that holds tools.

@jonathanv9587 9 ай бұрын

Big thanks! I misplaced the manual while inboxing, so your video was super helpful in getting this thing together properly.

@NicholsCounty 9 ай бұрын

Glad I could help

@kathyao9892 10 ай бұрын

I just got it in white, still trying to figure out how I’m going to get it out of my RAV4. They are $349 now and there is a $50 coupon on Harbor Freight. This one is going in my craft room😁. Thank you for assembling it on video, it’s going to help me👍🏽

@NicholsCounty 9 ай бұрын

Get some help, this is very heavy.

@JoshThompson25 9 ай бұрын

i got one today, got it home and unboxed it. Checked the drawers before i started assembly and found that other than the top drawer the other drawers dont close easy like i feel they should. they close till like the last bit then i have to give them a pretty decent push to get them in all the way so that it can be locked. Pretty sure they arent suppose to be like that. Its going back for an exchange tomorrow

@NicholsCounty 9 ай бұрын

Yeah. That doesn't sound right.

@spikelove9533 6 ай бұрын

I am going to get one so I looked at several vids it just dawned on me watching you the reason the key flips over so it's convenient to leave it and lock the drawers in when your rolling it. Cause we all know if 1200 lbs of tools in drawers go. Sliding out all at once it's gonna tip over

@NicholsCounty 6 ай бұрын

Yes. That is the reason.

@jameswoods6900 Жыл бұрын

It's important that the washers are put onto the nut/bolt in the right order, so always make sure that you put the spring washer (the one that's split to give it more flexibility) on first and the flat washer on second. Load the spring washer onto the bolt first, and the flat washer second.

@NicholsCounty Жыл бұрын

Thanks for the tip!

@dannyboyd1299 8 ай бұрын

😂😂😂😂😂😂😂😂😂

@DarkEsounds 6 ай бұрын

glad someone said something lol

@louisward3654 5 ай бұрын

I was wondering if I was the only one who caught that

@jeffreyedwards1181 5 ай бұрын

That’s the only reason why I looked at the comments was to see if somebody else spotted that

@Hansaman58 5 ай бұрын

Nice box but would be nicer if it had soft close drawers. But very cool that it came with drawer liners.

@NicholsCounty 4 ай бұрын

Yes. Would be nicer if it came with a 12 pack of beer as well.

@jamesp739 2 ай бұрын

For the money, I think HF tool chests are great values. Are they the best? Hell no, but they are pretty darn good. For the average Joe and even many pros, it's hard to beat, again for the price. If you need soft-close drawers, built-in power strips and refrigerators, look somewhere else...And be prepared to spend a lot more money. I have US General stuff that I bought 15+ years ago and it's still going strong. One of the mods I did was to replace the stationary castors with swivel casters. It makes it so much easier to manoeuvre. Just remember to put the locking swivils on the front side of the box! I noticed your tool drawers opened quite easily when moving the chest around. On my old US General, the friction latches could be adjusted to prevent that. Perhaps your Youkon chest is similar. Check your owner's manual. HF is pretty good at having product manuals available on-line if you no longer have the copy that came with the unit. Now that you've lived with it for a year or so, are you still happy with it? Any follow up thoughts? Thanks for posting!

@NicholsCounty Ай бұрын

Thanks. I'll definitely check that out.

@robcrossan6274 Жыл бұрын

Looks good. I thought about buying one for at work, the price was really attractive. I decided to buy the biggest us general and I'm happy with it, but sometimes wish I went for a smaller minimal set up instead. If I had to do it over I would have all harbor freight tools and a yukon box, and do my job with cheap stuff. More young guys should do this instead of a 15k snap on box imo.

@NicholsCounty Жыл бұрын

Yeah no kidding. Don't get me wrong, snap on is great, but..

@CRAZYDONCT Жыл бұрын

I just bought one on sale at 399.00 with a 30% off coupon, I got it for 279.30 + tax Great deal for a nice tool box.

@NicholsCounty Жыл бұрын

Nice.

@shelllythomforde2288 Жыл бұрын

I just used a 25% coupon! Got it for $321 tax included. 👍

@vicarinatutu19 Жыл бұрын

@@shelllythomforde2288did you use the 4th of July coupon? I tried using the 25% but cabinets did not qualify

@soop3938 9 ай бұрын

would you say this is a good apprentice box? i’ve been working out of a shop owned ironton cart (😭) and I’ve been looking to upgrade, but i don’t know if this is too large or not

@NicholsCounty 9 ай бұрын

I don't know what size you would need. Box works fine though.