Jeep Rod Chassis build (War wagon part 3)

[@rafaelrivera9508]

I really don't think people understand how fast this jeep is going to be... great video...

[@orfy123]

Depends on traction.

[@cadillacdan3404]

New merch arrived yesterday looks good thanks!

[@ThatRustLife]

Glad to hear!

[@jeffs4690]

I never get to comment 1st and I got nothing except "if you ain't 1st your last"-Ricky Bobbie. Seriously though that Jeeps going to be a beast and so much fun! Bet that owner(sorry forget his name) can't wait to get it. Seems like he wanted the best in parts and builders!

[@HardCoreFab]

LOL RICKY BOBBIE!!!

[@charlietabone6162]

I love radical builds like this to watch come alive. I’ll be here for every episode

[@MillCreekFabShop]

Anthony, very nice work as always. Conner needs safety glasses when running the chop saw. Buy him some boss. lol

[@HardCoreFab]

He uses those all clear ones and they are hard to see in video sometimes

[@MillCreekFabShop]

@@HardCoreFab never heard of those type.

[@normabrawner4881]

This is going to turn into a really nice build . Just love your work.

[@HardCoreFab]

I appreciate that, it's been a fun build so far!

[@SGPaintworks-fe2fw]

I look forward to your videos each week. Your creativity in these builds gives me motivation for my own projects

[@HardCoreFab]

That's awesome to hear, thanks you!

[@TrendsbySterling]

Anthony that's a lot of engine for that Jeep. Major horsepower! Enjoying the build!

[@HardCoreFab]

Yes it is!!!! It should be a blast!!!

[@AlanPitt-y3n]

That is going to be one very fast and very low Jeep 🛠🛠👍🏼👍🏼👍🏼

[@HogshooterHotrods]

This bad boy is going to be a ripper for sure!!

[@HardCoreFab]

Oh yeah!!!!

[@orfy123]

Looking bad ass. Thanks for posting. Wishing you both well From Liverpool, England.

[@HardCoreFab]

Thank you and thanks for watching!

[@shanewright6958]

It’s coming along nicely 👍👍

[@raysaxton9981]

Think about Hydroboost brakes. you already have power steering pump and it will take a lot less space

[@jakelords24]

My buddy cut the cowl at the body line on the sides of his CJ5 and added 3 inches. Gave a bunch of more room and looked proportionate when it was done

[@HardCoreFab]

That's cool!

[@johnkranz4004]

Coming along nicely Antony well wood makes a under the Dash Brake pedal and booster

[@HardCoreFab]

Yeah I talked about using one under the dash in the video

[@alanstryker7355]

Must be nice to use all new parts & pieces.I bet it saves alot of time with the build, plus no rust to deal with.

[@HardCoreFab]

It has been very nice! Not something I get to do most of the time!

[@organgrindergarage]

Great job y’all!!!

[@shotsrodder]

This thing is going to be a ripper 😎

[@HardCoreFab]

it should be

[@thercbarn5001]

Nice! I just love the jeep rods. Mike

[@charliemclaughlin1042]

Great video 👍

[@JokerInk-CustomBuilds]

I recently built an RC jeep hotrod/drifter.... I basicly chopped and stretched it exactly like you did on this real build! lol -I did a pan chassis for mine though...

[@HardCoreFab]

That's cool I would love to see it!

[@JokerInk-CustomBuilds]

@HardCoreFab I can prolly make a short video showing it offthis sunday... I'll let you know here when it is up....☺️ P.s. loved your video. I look forward to seing it being fully made. :)

[@JokerInk-CustomBuilds]

@@HardCoreFab I just uplaoded a one minute video with a 360 view of my jeep rc if you wanted to see it...☺️

[@barryglover1347]

For your under dash brake system have a look at Toprodz, Melbourne, Australia. Pete is a great guy and hotrodder.

[@whittlerdave1440]

This Jeep is going to be totally awesome one is done I can't wait to see it

[@MacsSpecialitiesMotorsports]

YES! The Jeep Rod Thang!

[@AdventuringwiththeS.G.O.C.C]

GREAT background music. TY

[@HardCoreFab]

Thanks man!

[@impalaman4546]

Great video guys thanks

[@HardCoreFab]

Thanks for stopping by and watching

[@dwal2165]

Thanks for making

[@HardCoreFab]

You're welcome!

[@brenttraylor5874]

Frame is coming together nicely mine is kinda jelly he actually has been puking 🤮 red all over my f250 !!!

[@HardCoreFab]

Oh no!

[@lethargicmotorsport2025]

Maybe look into a hydro boost for the power brakes , I’ve done this to gain room on a few mini trucks.

[@HardCoreFab]

I couldn't find a pump that would work with this motor

[@MarekMakes]

Lookin good!!

[@sherrylockhart305]

More motor is always better 😊

[@HardCoreFab]

100%

[@Stuffdexdoes]

Idea.. I see that your engine exhaust comes down nicely just I. Front of where your custom metal "side skirts". How about using flexhose from exuasht and run the exuaghst thru the rectangle tube side skirts to the back..

[@HardCoreFab]

@@StuffdexdoesI guess great minds think a like, I was already thinking something like that as well.

[@johngallagher5341]

Can you use your roll bar for your air tank? I don’t know if it’s possible but if you can that would be awesome. If not I seen where they have used their bumper with a round tube the length of the bumper. Just idea I was thinking about. Thanks for listening to the thought.

[@HardCoreFab]

That is a great idea! I should have thought of that! Thanks!

[@georgebowers2294]

Make your front or rear bumper or 3ven part of your frame the air receiver tank.

[@HardCoreFab]

Yeah, someone else said that too, and IDK why I hadn't thought of that yet, but that seems like the thing to do!

[@MarekMakes]

I’ve got a jeep tub I got for free sitting on top of my chicken coop just waiting for a build like this

[@HardCoreFab]

You should build it. I got one in an old barn at the farm but I'll probably never get around to doing it for me.

[@simongardiner2082]

can you put the air compreser behind the seats and the gas tank there as well

[@HardCoreFab]

The gas tank will have to go behind the rear-end. Not sure on the compressor yet

[@HarveysHackShack]

So cool.

[@HardCoreFab]

Just trying to be cool like the Hack Shack!

[@HarveysHackShack]

@ me too. 😅

[@kodak_jack]

I know your emphasis is on making this a Jeep that can be lowered, but this same thing done at conventional height would still be a good build. Putting a brake booster down underneath will be a challenge.

[@HardCoreFab]

Your right but we already did that build and we are always looking to take things to the next level. kzbin.info/www/bejne/nnmUp4qAgqurbbssi=wHP7R5qGC9JUK_iA

[@kodak_jack]

@ Good thing you grabbed a Hemi now as they’re being dropped.

[@mikebartosch9892]

I have an idea for the air tank. Build one to hang in front of the grill like the Mooneyes old school fuel tank.

[@HardCoreFab]

I like that! Not the look that we are going for on this build but I'll save that back for another build in the future!

[@mikebartosch9892]

@HardCoreFab How about jerry can for the air tank. Kinda keep with the military theme.

[@tomc2748]

Hydro boost instead of vacuum booster may be more compact.

[@HardCoreFab]

I looked at that too but couldn't find a power steering pump

[@Buickluvr]

Race cars don't use brake boosters. They use properly sized master cylinders and pedal ratio. Call Baer or Wilwood, they'll tell you. Save room and that hot rod motor might not create enuff vacuum with only a 7 inch booster. I'm sure you know this, but others don't and you asked for comments. (race car handling? with knobby tires? oughta slide real nice... until it catches and rolls... ) Aren't you glad there's "know-it-alls- like me? Gives you something to moan about... Gives me something interesting to watch... Thanx! Hope Julie is doing well!

[@HardCoreFab]

I'm not sure the words "race car" ever came out of my mouth did it?

[@speedbuggy16v]

you might consider an electric brake booster.

[@HardCoreFab]

I'm not sure how I would fill with an electric booster

[@speedbuggy16v]

@@HardCoreFab easy, you just plug it in! 🤣

[@HardCoreFab]

@speedbuggy16v i know how to install it I said idk how I would feel about it. Probably would be fine. I know they use them on new car.....

[@speedbuggy16v]

@@HardCoreFab Just going for the funny man!

[@shotsrodder]

No fear 😂😂

[@santathomhigh110]

Hydro boost?

[@d.collier_8280]

Where do you get the reproduction bodies from?

[@charliemclaughlin1042]

China

[@HardCoreFab]

There are a few places online that sell them

[@xozindustries7451]

Will you buy that kid some safety glasses

[@HardCoreFab]

@@xozindustries7451 He has some.

[@donniehamlett2157]

Rather than a bumper could you v not frame up front and bend them in weld together to give you smoother look

[@HardCoreFab]

That would be a great look but maybe to refined for the end goal

[@mikeseldomridge8052]

Where is the truck build at

[@HardCoreFab]

Under going some changes in the next video I the next video I hope

[@claudettedeschamps5096]

Name of jeep rod should be called Ripper

[@chrispearson2284]

Hydroboost under the floor