1947 ford Rat Rod build!

Check out this incredible kustom build! This is Old Crow, a 1947 Ford rat rod. This classic hot rod is a must-watch for any rat rod enthusiast! What started out as a salvage yard Cinderella, this build has turned into an amazing, one of a kind, rat rod. From the start, I had a vision for this classic Ford, which has now been successfully brought to life. Thanks for following along with this fun custom build. For more details, be sure to check out the entire build series here on this playlist.
Thank you to our sponsors that helped a ton along the way:
Performance Distributors: performancedistributors.com/ for the D.U.I. distributor
Steele Rubber Products: www.steelerubber.com/ (@SteeleRubberProducts ) for all the window and door trim.
and thank you to Vern Hinkle for cutting and installing all the glass, Steven for the awesome Raven head, and Brady Scott (@bradycreativeart ) for the beautiful paintwork.
And thank you for all the support of our subscribers, your encouragement throughout this build has helped more than you will ever know!
🔔 Subscribe for more / hardcorefab
Visit our website: www.hardcorefab.com
Visit our TeeSpring Store: hardcore-fab.creator-spring.com/
Thanks for watching!
#hotrod #ratrod #ratrodbuild #fordtruck #custombuild #kustom #oldcrow #hardcorefab @hardcorefab @SteeleRubberProducts @bradycreativeart

[@patrickschofield184]

Always wanted to do a rat build with my brothers. Sadly two have passed away. We just never got our chance. RIP Dan n Lloyd.😢

[@HardCoreFab]

Sorry for your lose.

[@777RocketS]

Sorry to hear it! You can do one in their honor still! Im watching this cause its similar to how I wanna build my 46

[@littlemanjonjon]

Giving new life to something that was dead. Beautiful.

[@srenlowmadsen1402]

Bella is a good Name for her. Wish her all the Best.

[@uffeibsen8872]

EPIC !!!

[@zekecorder8226]

Wonderful build! Amazing engineering! Cannot fault any of the work done. However, I am one of those who does not quite understand putting in that sort of engineering, time, and money but leaves it looing like some sort of backyard build that ran our of funds and skill when it came to the body, etc. I am just one of those few who loves to see a sharp looking vehicle after that much work. Leaving it look like an ancient old car that someone just threw a new engine in does not do it justice, in my opinion. To each his own.

[@thetoycollectorgreyghost7651]

I need someone like you to help this old disabled USMC VET out and help me with the little truck I’m working on. It just hard with my disability to do to much at a time. Love it your build is amazing and awesome ❤❤❤❤

[@dougstaner1220]

Beautiful metal finishing. Great side impact strength. Cleaver suspension.

[@HardCoreFab]

Thanks 👍

[@robert7365]

Konstruktion und Ausführung deines Projektes aller 1. Sahne. Ich kann dich nur gratulieren. Sehr schöne Arbeit.

[@kellykellogg9451]

True art comes in many forms. The good old American rat rod is a work of beauty. I watched this entire video and was taken with every scope of this build. Excellent job brother. You gentlemen are indeed masters of your craft !!!

[@HardCoreFab]

Wow, thank you!

[@kellykellogg9451]

@@HardCoreFab dude, I want to shake your hand! But I live in Kansas City !!! Lol

[@777RocketS]

I have a 46 Ford ratrod, and I could not pull away watching this, just incredible and this is exactly the kind of stuff Im wanting to build

[@HardCoreFab]

Glad you liked it

[@bradycreativeart]

One of the coolest rat rod builds I’ve ever seen in person. So proud to have been a little part of this project too. Keep pushing and building 🖤

[@HardCoreFab]

Thanks man! We are proud to have a some of your work mixed with ours!

[@SujonSekh-ry4dn]

❤j gg😅

[@wolfparty4234]

For sure!! This build is amazing. You really put a ton of like “shoot from the hip” designs on it and still kept with the era of the original truck!

[@HardCoreFab]

Thanks!

[@chevy-bull2041]

Du bist einer der Künstler, die ich verehre!! Eine Wahnsinnsarbeit. Leider lebe ich im f... Deutschland, in dem es TÜV gibt und es NIE zulassen würde, wenn man ein Auto selber baut. Und wenn, dann nur mit allen möglichen Pr4üfungen und GELD! Aber dennoch: ich bin schwer begeistert!!

[@apexaero]

Hallelujah Brother! You're about the third person in my lifetime that solder on the Copper Lugs to the wire for batt cables! Them Zoomies! : )🖖

[@charlesroer972]

Damn sano ride . I’m too tore up to build these anymore ! Do enjoy watchin builders with the enthusiasm. Never compromise !

[@chev7122]

I usually fast forward and skip a lot of the video when watching a build. Not this time! Enjoyed it from start to finish in real time! Awesome job!

[@HardCoreFab]

Thank you very much and thanks for watching!

[@BESmith-sh6jj]

That's one hell of a workbench

[@We_in_Miami]

First and I love what you’re doing with RatRods it’s my dream and Bobbie

[@HardCoreFab]

Thanks!

[@dockmasterted]

A TRAILER QUEEN!

[@HardCoreFab]

Hahaha

[@johnperun232]

Thanx for Sharing your experience with building your Hot Rod, very impressive Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸

[@robert7365]

Construction and execution of a first class project. I can only congratulate you. Very good work.

[@HardCoreFab]

Thank you very much!

[@henriknordeng]

That is a cool rod if i ever seen one. Great build. You Sir are a true artist.

[@HardCoreFab]

Thanks man!

[@bradh74]

Definitely some talent there! Not a big rat rod guy although the original rat rods were kid of cool. Nice work.

[@celsogualda9000]

Parabéns pelo lindo carro que vc construiu, assisti esse vídeo aqui do Brasil e fiquei admirado pelo seu trabalho. Parabéns.

[@timothysheridan416]

so awesome

[@HardCoreFab]

Thanks!

[@chopperdave2010]

awesome work! I'm building a 38 ford pickup rat rod similar style. I just got a bunch of good ideas watching your videos. Thank you and keep up the great work!

[@HardCoreFab]

Glad to help and thank for watching!

[@UCanDoIt2Mike]

Love your dedication to curves and angles other that 90 degrees. Mike

[@walterhulsey5297]

Very very impressed with your craftsmanship. Well done for sure

[@HardCoreFab]

Thank you very much!

[@davedavidson9638]

This was a true to watch this build to Fruition !

[@jerryhuff86]

@ 42:15 nice work! This guy has a deep skill set. Excellent.

[@HardCoreFab]

Thanks!!!

[@jerryhuff86]

You are welcome 🙂

[@73elperro]

Excellent video,thank you for sharing your knowledge!!

[@HardCoreFab]

My pleasure!

[@frankhackett771]

You are One hell of a Fabricator, Amazing build

[@HardCoreFab]

Thank you frank!

[@dennisjones1642]

Hey Hi Hardcore Fab from here in the D Michigan hey the motor city 😅😊 thanks for your time and video of your Project 47Ford I enjoyed watching your Detail progression/ Build 🎉❤😁👍

[@terryfralick1465]

Another great 2nd channel entertainment, Loved the new trailer very kool.

[@goretc1]

Колосальная проделана работа. Смотрел на одном дыхании. Автору жирный лайк! 👍👍👍

[@colinwhite2401]

Nice work. A man of many talents. Glad I ran across your channel.

[@HardCoreFab]

Much appreciated! Glad to have you!

[@JorgeVite-qb5rw]

Muchas Felicidades Joven Por Su Canal. Saludos Cordiales Desde Mazatlán, Sinaloa, México. ..

[@johnkranz4004]

Excellent job Anthony looks KILLER KOOL

[@speedybuggy1677]

Very cool 😎 Heather's homemade very great job 👍👍👍👍👍

[@alencareisakustom]

Que show!!!!👏👏👏

[@china-trip]

What a cute video and song. We are new friends just joined your channel! So happy we are friends. Thank you for sharing this cute video!

[@modifybawa7622]

Good work done

[@ewanbaxter9199]

Excellent build quality, great ideas too. Personally I would have fabricated top swivels for the front air suspension bags, they don't look happy with the top plate tilted sharply when the suspension is up.

[@franciscococa4849]

Congratulations from Spain!! Very nice!!!

[@henktulp4400]

Great build,nice music,awesome vid!!!!!!!

[@zainudinajaxajax]

What a fast moves, wow wow wow i luv it

[@edifariajunior4360]

Congratulations amazing work.

[@johnbehneman1546]

THANK YOU SO MUCH!!! TOTALLY AWESOME FABRICATION SKILLS!!!! TOTALLY AWESOME BUILD!!!! TOTALLY AWSOME RAT ROD TRUCK!!!! TOTALLY AWSOME VIDEO!!!! THANKS FOR SHARING!!!! I LEARNED SO MUCH!!!! I LOVE MY RAT ROD FAMILY!!!!

[@HardCoreFab]

Glad you like it!

[@zainudinajaxajax]

I luv what u are doing, so nice, im from malaysia luv uolls creativeness awsomes

[@LuizCarlos-cb3ug]

continue assim amigo parabens seus videos são muito bom show

[@ronaldbrown7780]

Merry Christmas God Bless you both.

[@HardCoreFab]

Same to you!

[@TheREALOC1972]

My brother and I are building a homemade Hot Rod out of odds and ends that is just laying around our farm and taking it on the Hot Rod Power Tour this year. Were putting a 63 Chevy C-10 cab that used to belong to the U.S. Forestry department on a 81 Oldsmobile custom cruiser wagon frame and using the 307 and THM 400 4 speed Auto transmission, were going to make our own bed using quarter panels from a 56 Plymouth Fury 4 door as the bed sides. The reason we decided to use the wagon frame is that it sits lower, the stock ride height of the 63 Chevy truck is 14 1/2 inches, the stock ride height of the wagon is 7 1/3 inches, were getting a 7 inch drop and didn't do anything to get it plus with being a newer frame and suspension it's going to be a smoother ride plus we will have disc bakes in front for better braking. Were also going to chop the top but were only chopping the front an inch and half so we can lay it down and the body has a rake to it. Were going to paint it Rustoleum Flat OD Green with the roof and trim in Rustoleum Gloss Black and were going to recover the Truck seat in Mochoa colored Canvas it it runs with our theme.

[@HardCoreFab]

Sounds like a fun project

[@TheREALOC1972]

@@HardCoreFab and cheap.

[@user-ic5fy6oz3f]

Muy buen trabajo. saludos desde Bolivia

[@speedybuggy1677]

Very nice rat rod I love it it's very great 👍👍👍👍👍 you do great work

[@nathanlebell9353]

I thouroghly enjoyed watching your build, well done👍👍

[@HardCoreFab]

Thank you!

[@tonyvilar5953]

Excelente trabajo Felicidades

[@rolandtrautmann8]

👍Der totale Wahnsinn. Meine Hochachtung vor dieser Meisterleistung.👍

[@djandysingosari]

fantastic

[@quantumgls.1820]

The besth The Man is very good. Pleasure and work.

[@HardCoreFab]

Thanks!

[@mcquart]

Brilliant craftsmanship, a dying breed unfortunately. Love your work. 💪

[@HardCoreFab]

Thank you!

[@dannystubblefield5478]

Amazing work-

[@thebeardedone1225]

Awesome project.

[@HardCoreFab]

Glad you like it!

[@cheapandeasy78]

Wow! Awesome job like always!!

[@HardCoreFab]

Thank you!

[@chuckster6513]

Hey Anthony, I thought I had followed the original build, but this video showed a lot that I had not seen. Thanks Work Safe, Be Well Stay Warm

[@pratikuscustomgarage]

Inspirador 👊🏻😎... Parabéns pelo ótimo trabalho 💥👍🏻

[@laborges4535]

Ótimo trabalho, você é um profissional altamente qualificado e o resultado foi maravilhoso. Abraços do Brasil!

[@HardCoreFab]

Thanks!

[@danmcelroy6584]

Sweet! 👍👍 That was cool to watch it get built from the ground up. Totally Cool 😎

[@HardCoreFab]

Thanks 👍

[@danmcelroy6584]

@@HardCoreFab your welcome. Turned out SWEET! 👍👍

[@sigurjonhalldorsson8116]

Tou got to be the best Rat Rod Car builder in the world..!! I NEED this BEAUTIFUL CAR in Sweden 🇸🇪 😍😎 woooow !! 👌🏻👌🏻👌🏻 // POLARBEAR

[@HardCoreFab]

Thank you! I could build you something!

[@jonathanshimoni1077]

Legend

[@johnkoury1116]

I have been looking for an old truck like a Diamond REO or something like yours to make my welding rig. I will have to put it on a 4x4 with maybe a cummins or an old combine diesel engine like a Perkins. Great video my friends.

[@HardCoreFab]

That would be a fun build! I would love to have a Diamand T

[@tday99music]

Nice work, thanks for sharing it with us

[@HardCoreFab]

You bet!

[@maxwellmcroberts6865]

Hi I am so pleased to have found your channel. You are very very talented fabricator, I will totally be looking in anticipation of your next project with you and your lovely wife and helps keep up the great work.♥

[@HardCoreFab]

Thank you so much Maxwell for the kind words!

[@Johnshaft1970]

​@@HardCoreFabWhat Engine Is In There ?

[@saar-lorraineracingteam374]

Super Arbeit. Sie sind ein Meister. *****

[@terrancesnyder9323]

Good afternoon to you all

[@HardCoreFab]

And to you sir!

[@nehemiasdasilva8817]

Grande mestre dos metais ,projeto incrivel,sem contar essa metaleira essa sonzeira,parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷abraço aqui do Brasil 🇧🇷🇧🇷🇧🇷paiz lindo,bonito por nataureza,e no controle de Deus:Deus renove suas forças e te dê a paz🎸🎧🥁

[@zainudinajaxajax]

U ar genius in hot rods rat type, wow

[@j-1159]

Mad production 🇦🇺👌💯

[@skipbolinger1370]

Dude your so meticulous !! Increadable talent

[@HardCoreFab]

Wow, thank you!

[@gerardomanuelortiztellado1460]

My Respect, Tremendous Works of Art❤ 🙏GOD BLESS YOU 🙏

[@HardCoreFab]

Thank you!

[@keithalbrecht4785]

WOW, you put a ton of fab work in!!! All that fab work put the Cool Factor in your ride!!! I never seen your builds till this one & I subscribed, Love it!!!!!!!!!!!!!!!!

[@HardCoreFab]

Thanks a bunch! And I'm glad to have you!

[@speedybuggy1677]

I give you five star ⭐⭐⭐⭐⭐ great work on the rat rod love to see it again and more

[@HardCoreFab]

Thanks again!

[@RobertHolloway-xv1ri]

GREAT BUILD BUD TAKE CARE CRAZY DAGO 🙂🙂🙂🙂🙂🙂🙂🙂

[@HardCoreFab]

Thanks!

[@nehemiasdasilva8817]

Deus os abençoe,seus vídeos são de excelência 👍😉👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷abraços na família 🇧🇷🇧🇷🇧🇷

[@AnthonyVentura-eb6vj]

Enjoy the rat rods while they're around like us.

[@MrEviLEddys]

Out standing Work , It's good to see folks using older styling in Rods

[@Dwight-kk1qo]

NOW CORSE that was a real nice tail SHOT MMMMMAAANNN

[@aroldooliveira5106]

Caro amigo boa noite passei lhe dar os parabéns pelo trabalho vc é ninja ficou top esse ford rat

[@raulst2888]

Hermoso trabajo😊😊

[@arjanvogel6444]

Thanks for your vid 😇💟💟💟 Love and bless you guy, your a artist beautiful work 👍😁💪👌👏👏👏.

[@HardCoreFab]

Thank you kindly

[@olevegn]

Respect from Norway🇳🇴🇳🇴🇳🇴🇳🇴👏🏻👏🏻👏🏻👏🏻🇮🇱❤️

[@patrickbaird290]

I was on board till I realized you put a damn Chevy moter in it

[@2K_Restoration]

I enjoyed your work.

[@HardCoreFab]

Think you kindly!

[@alanhicks3361]

Great car

[@leonardogonzalez3067]

i love you rat rod ...look like alien ...good name for your car is alien nation ...with small alien in hood ...alien in grill .

[@user-ni9nu1si3m]

很厲害的改裝贊啦，

[@jimmyturbeville8753]

sir you are one fine fabricator truck looks great

[@HardCoreFab]

Thank you!

[@josejanisio1141]

Adorei, fantástico!!!❤😂. Abraço. José do Rio de janeiro. Brasil.

[@Balya-Malkan]

Admire your work 😊regards from Tokyo 😊

[@jdfmfb03]

Awesome build!! Would love to see doodle drawings you may have done as a kid Your fabrication is Artwork 👍🏁🇺🇸

[@HardCoreFab]

I never really doodled much when I was a kid but I built a lot of stuff!

[@mikemchaney1003]

How come no one uses pivoting plates on their air bag builds to keep the air bag from distorting so badly when aired up? Cool build video though. The bead rolling work....just awesome.

[@HardCoreFab]

Answer you are looking for is in this video at about the 4 min mark kzbin.info/www/bejne/fHq7kHWtnJtmqqcsi=7zQFRGUNbzI6P1Uf

[@billsterling6485]

Looks GREAT

[@HardCoreFab]

Thanks!