Hi, welcome to my channel! This is part 2 of the installation. there is Part 1 video in the channel if you need more info.
Пікірлер: 76
@benr1866 Жыл бұрын
I’m looking into buying a VRod Muscle and i’m planning on installing a body kit. I haven’t found any videos on how to install as you noted as well. Thank you so much for your two videos, they were very helpful in understanding how to install a kit. Great job man, really appreciate your videos. Your bike looks great! Have a great summer and stay safe bro. Ben
@DIY_Corner253 Жыл бұрын
Yes sir! You’re very welcome. I’m glad you found it useful. I felt like everyone love vrod and want to own a custom vrod but so hesitated to do it since there are no one willing to share it !
@cc.4fun Жыл бұрын
For the rear brake reservoir, I bought a small one from Amazon (round) and with a round bracket in the frame, just bolted. I can send you pics. Maybe on the exhaust video that I have you can see it
@DIY_Corner253 Жыл бұрын
Hi, thank you brother. I ended up find a better spot for it already:)
@jermaroemerencia2551 Жыл бұрын
@@DIY_Corner253where did you ended putting it?
@DIY_Corner253 Жыл бұрын
@@jermaroemerencia2551 hey brother! I ended up mount it right under and parallel with the master cylinder.
@DIY_Corner253 Жыл бұрын
can't see it on the video. so it seats behind the radiator Shroud ?
@Arsh-bv2ij4 ай бұрын
Thank you for this ! I’m going to follow this video and put a body kit on my 2016 NRS
@DIY_Corner2534 ай бұрын
Cheers 🍻
@Arsh-bv2ij4 ай бұрын
@DIY_Corner253 can you please drop a link to the exhaust and the body kit you put on.
@DIY_Corner2534 ай бұрын
@@Arsh-bv2ij link for body kit is in part 1 installation video. Exhaust is Akrapovic 2 to 1
@yummyzoot3 ай бұрын
Me 2
@dsmith383 Жыл бұрын
Nice job! I hope you keep doing more with your Vrod or any Vrod for that matter. Congratulations
@DIY_Corner253 Жыл бұрын
Thanks for your support! Will try to make more video
@alecxixfernandez52129 ай бұрын
Thank you for the videos 🫡😎
@DIY_Corner2539 ай бұрын
You’re welcome rider 👍
@mohaj1003 Жыл бұрын
Thank you so much,, keep the VRod service there no many videos about it..
@kikoondaroad59153 ай бұрын
I like vrod👍👍
@DIY_Corner2533 ай бұрын
🤘🏻😃 welcome in
@rottie6900 Жыл бұрын
Thank you for this video! Needed to see how it was done.
@DIY_Corner253 Жыл бұрын
Hi! You’re welcome
@HansMartinHedum18 күн бұрын
Hi. do you have a video of mounting the rear fender and relocating the ecm?
@eerhtelpirT8 ай бұрын
Such a good video bro, hardly any stupid music throughout the whole thing
@DIY_Corner2538 ай бұрын
Hey! Thank you 😄🙏. Pretty concentrated and No music for this particular video lol
@duchateaufrancis6292Ай бұрын
bon boulot
@mustang88128227 ай бұрын
Great video! Love the rear fenders, tail section....I am leaving the tank stock,, that's the reason I bought mine. Muscle lol?
@DIY_Corner2537 ай бұрын
Thank you rider brother! Muscle already got the aggressive looking! I think you can convert to night Rod special rear fender if it’s what you’re looking for 😀
@Sam123QU29 Жыл бұрын
Beautiful bike brother, absolutely love it. Ride safe and keep it real 💯
@DIY_Corner253 Жыл бұрын
Hi! Thanks brother! Wish you Nice rides out there
@jeremychildress8843 Жыл бұрын
I have a 2017 VRod Muscle. I’m looking into changing the body style. Total, what was the amount of the kit? So I can have some what if an idea. Your bike looks great.
@DIY_Corner253 Жыл бұрын
Thank you for visiting my channel! Depends on where you buy the kit, my is around $1200 unpainted. You will have to do all the work yourself. Watch my part 1 installation video. I have the link and more info about it :). If you order the kit from them. Tell them you got referred by Tu Nguyen (DIY Corner ) enjoy your vrod
@tamartopuria690711 ай бұрын
Thank you
@robertesek2930 Жыл бұрын
Nice video bro! Keep up the good work!
@DIY_Corner253 Жыл бұрын
Thank you very much for watching and subscribe for my channel! 😀
@cdomenico2711 ай бұрын
One more question, my speedometer doesn’t really fit properly in the new air box cover. It’s the same as yours. I have a 2016 v rod night rod. When it clamps down does it fit well or did you have to shave some of the fibre glass on the inside?
@DIY_Corner25311 ай бұрын
you are right. It won't fit perfectly. there will be a gap between cover and odometer. I spoke with seller and that probably the best they can do. each body kit maybe lightly different. for the gap, you probably have to seal it up after installation or you can leave it like that and make sure no water get into it. Don't ride the bike in the rain or wash the bike the way you wash your car. after custom the bike need to be treat like a show bike, lol real gentle =D
@Lfss12 ай бұрын
Do you have a link for the air filter cover bolt? I can’t find the right size I know is m6 but I can’t find like the one you have installed
@DIY_Corner2532 ай бұрын
I didn’t have to order it. You will have to order a long one and cut it down. I believe it’s around 5.5” long
@hawaiibikekahuna82046 ай бұрын
Could rivets have been used on the sides of the radiator?
@DIY_Corner2536 ай бұрын
I recommend using plastic fastener. It will be easier
@marcoquedevez1851 Жыл бұрын
Hi, you bike looks awesome, could you please tell me the kit name and price!!! I just bought a Vrod I’m new in this world !!! Thank you and keep doing nice videos like there! Success…
@DIY_Corner253 Жыл бұрын
Hi friend! Thanks for visiting! Check out my installation part 1 video in my channel! I have the link in there
@philfomenko60813 ай бұрын
What did you do about the handlebars after removing the speedometer? How did you hold the handlebars down?
@DIY_Corner2533 ай бұрын
Removing the odometer doesn’t make any change to the bar, I just make a metal plate to cover on top to make it look nicer.
@philfomenko60813 ай бұрын
Thanks
@albertolariosmarque10 ай бұрын
Did you ever end up putting the rear? I’d love to buy a Harley and do this, but I would love the have the rear also Does that need cutting?
@DIY_Corner25310 ай бұрын
Hi I did custom rear fender on different VRod . Not this one. I didn’t have a chance to make video for it since it was little messy to install. But I plan to make a video in the future
@albertolariosmarque10 ай бұрын
@@DIY_Corner253 is it hard to do the rear? Does it require cutting?
@DIY_Corner25310 ай бұрын
@@albertolariosmarque I took the rear frame off so no cutting on the bike, just trim the fender
@DreDuece88 Жыл бұрын
I’m running into the same issue with the rear brake reservoir: it won’t fit in the radiator cover. Did you find a cover for it?
@DIY_Corner253 Жыл бұрын
Hi! I will make a short video about that soon ! Stay with me
@DreDuece88 Жыл бұрын
@@DIY_Corner253 Thanks!!!
@DIY_Corner253 Жыл бұрын
Hi, you can find another container and transfer the fluid over but then you need to bleeding it! What I did was mount it up side down with a couple of zip tire on the side without extending the hose. Just paint the cap black. It the quickest way. You can see in other video I made with the bike
@DreDuece88 Жыл бұрын
Hi! Do you have the Amazon link to radiator mesh?
@DIY_Corner253 Жыл бұрын
AggAuto Universal 40"x13" Car Grill Mesh - Aluminum Alloy Automotive Grille Insert Bumper 6x12mm Rhombic Hole, One of the Most Multifunctional Shape Grids 100x33cm Black a.co/d/dwqhEJy
@eversonespana35736 ай бұрын
I bought a 2007 vroad and I have the kit to modify it but I would like to know if you can help me with that job,$
@DIY_Corner2536 ай бұрын
Hi! Where are you located? I’m in Spring Texas
@eversonespana35736 ай бұрын
I live n Conroe tx
@cdomenico2711 ай бұрын
Hey, there is an IAT sensor in the black air box cover that you removed that isn’t in the video. Where did you put that after switching the body kit?
@DIY_Corner25311 ай бұрын
You just need to drill a hole on top of the plat top cover and mount it on there or mount it on the inside wall of the air box pan
@cdomenico2711 ай бұрын
@@DIY_Corner253 amazing thank you!! One more thing, for the air box cover, you didn’t show how you drilled the 2 holes in the front to keep it in place. I bought the exact same kit so wondering how you did that v your video is great
@DIY_Corner25311 ай бұрын
@@cdomenico27 I showed it from minute 5:25 in the video. Pretty straight forward brother
@joelieners79644 ай бұрын
Hi, I am also installing this kit and was also wondering with the sensor. Because there is a company which make new cover for the airbox pan for airbox cover with integrated odometer. But you say we don't really need that and can fix the sensor somewhere inside the pan? Thanks in advance
@ikezarate1756 Жыл бұрын
What is the size of the bolt you use for the air filter??
@DIY_Corner253 Жыл бұрын
Hi! I think it is M8 metric
@sebastiengauthier27856 ай бұрын
How long is the New m6 bolt
@DIY_Corner2536 ай бұрын
Cut to where it got about an inch left from flat top filter cover. Sorry I don’t have the exact measurements
@johnnylee37503 ай бұрын
@@DIY_Corner253 where did you get the M6 bolt? can you post a link?
@DIY_Corner2533 ай бұрын
@@johnnylee3750 sorry! unfortunately I don’t have the link. I got it at work and cut it off to the correct length. I think You should be able to buy at local hardware store
@RahulKumar-qo7lq Жыл бұрын
How much Dollar will be required for the body part
@DIY_Corner253 Жыл бұрын
Around $1200 for the body kit
@DIY_Corner253 Жыл бұрын
Around $1200 for the body kit
@RyanMadsen678 ай бұрын
How much did the whole body kit cost you and would you do that for me if I wanted a body kit on my Harley, Davison I live in HARLINGEN Texas
@DIY_Corner2538 ай бұрын
Hi! Do you have a v rod or you have different bike? I only do v rod. And if you have Facebook, you can get in touch with me at “Tu Hoang Kha Nguyen” for easy communication
@Felixbalboa Жыл бұрын
Great job anh. Anh co instagram ko?
@DIY_Corner253 Жыл бұрын
:) cảm ơn bạn mình chưa lập instagram cho VRod. Maybe create one pretty soon