Harley Two Brother Racing Shorty Turnout Exhaust on 131ci

Installing a Two Brothers Racing 2-1 Shorty Turnout on my Harley-Davidson Softail Low Rider S with the 131ci SE engine.
Get TBR exhausts at:
RevZilla: bit.ly/BHM-RZ-T...
Shorty Turnout: bit.ly/BHM-RZ-T...
I GIVE AWAY Motorcycles! ❱ / blockheadmoto
Get PERKS as a Channel Member! ❱ bit.ly/BHM-YT-...
Don't forget to Subscribe! ❱ www.bit.ly/BHM-Sub
Channel Sponsors!
❱ Ruroc: bit.ly/BHMxRuroc
❱ Sena: bit.ly/BHMxSena
❱ RevZilla: bit.ly/BHMxRevZ...
Thanks for tuning in! Ride safe, stay vigilant!
▬▬▬▬
❱ GEAR I USE:
Helmet | Ruroc: bit.ly/BHMxRuroc
How We Talk to Each Other | Sena: amzn.to/2LRZLnY
Gloves: bit.ly/BHM-RevI...
Phone Mount | Rokform (Discount: BlockheadMoto25): bit.ly/BHMxRok...
❱ LINKS:
Blockhead Shop - bit.ly/Shophead
My Stuff @ Amazon - www.Amazon.com...
Instagram - / blockheadmoto
Facebook - / blockheadmoto
Twitter - / blockheadmoto
❱ BIKES:
2020 Harley-Davidson Low Rider S 131
2013 Harley-Davidson Iron 883
2005 Sucker Punch Sally Chopper
2010 Honda CBR600RR
2018 Honda Grom x2
Blue Elephant (TBA)
❱ CURRENT GIVEAWAY BIKES: Season 05
2018 Harley-Davidson Iron 883
2016 Indian Scout
2015 Yamaha Bolt
▬▬▬▬
❱ MAIL:
Blockhead Moto, PO Box 771077, Winter Garden, FL 33777

[@BlockheadMoto]

How much horsepower do y’all think we’ll gain w/ this one over the 2-2? 😁

[@CaffyPvP]

~10hp on the top end, but the shorter pipe on the TBR will strangle your low end torque a little bit. M8s love long exhausts and you can easily pick up 10-15 torque and 6-10 horsepower at 2500-3k rpm with a full length setup.

[@TheAndeeeee]

What do you think about removing the baffle on this exhaust?

[@scottmckinstry1698]

2 HP gain. That's my guess.

[@HOSKO58]

I don’t think it will be as significant as people think at least to the peak numbers, but if I put a number on it I’d say around 5 through the mid range on both hp and tq

[@jacksonbrewer3302]

Interesting but the 2 into 2s look and sound so much better I reckon

[@RYANo_Moto]

@blockhead you sold me on the 2020 low-rider S, so I bought one today! I’m blown away by the 114, I can’t even fathom the 131 after riding mine today. Insane.

[@watsonm67]

Just bought my LowRider S last week. First mod I’m doing is getting that exhaust. It sounds freakin awesome like what a Harley should sound like.

[@chandlercraythorn1418]

Two brothers products are so good. I put their gen 2 2-into-1 on my 2018 streetbob and the power gain was immediately noticeable

[@del_619]

Put the same pipes on my streetbob. Also went with the stainless so it pops out away from the black. The bronze looks great. The pipes let you really feel all the power in the bike. They’re loud but not as high toned as Vance and Hines and I love it a lot more. One of the best pipes for vtwin on the price.

[@CraigSmith568]

I like this exhaust a LOT better. Finally something you have done that I like.

[@DJ_Snipe]

I can attest this exhaust hits all the right notes! Nice growl when you need it and idle isn't disturbing. Low rumble tone

[@zacharyfett2491]

The bike is going to look so much better with the 2 into 1.

[@kaylac8287]

Hey, to each their own. But, I for one don't care for the look of the stainless on your bike, I think the black looks better. But sounds great

[@scottmorgan121]

Those TIG welds tho.... 🤤🤤

[@mechcavandy986]

I prefer black too. But TBR probably gave him these. Free makes it better.

[@amg5795]

Two Brothers Racing 2-1 is trash killing a lot low end TQ Not happy with this product would not recommend any one. Get S&S super street or something more with a back pressure. But a great video Blockhead Thumbs up!

[@s.c.bolton6428]

I have always enjoyed the sound of their exhausts.

[@Daskunkster]

I literally just ordered this exhaust for my bike. Since I can’t ride her until spring, I’ve got a project. Great video. Thanks!

[@SLO-Ride]

Love my TBR cans on the Dyna. It went from the Screaming Eagle "fluff fluff fluff", to an actual big boy Harley thunder.

[@BigSmittyRiding]

That TBR exhaust looks and sounds amazing!!!

[@rob7105]

Imagine how many TBR exhausts have found a home on modern harley's because of this bike.

[@calgacus83ad57]

Ahhh. Classic Blockhead content 👌

[@rastroyfyah5630]

I know you'd love it. Sounds like you got a real motor now. Safe Riding

[@fps636]

GOLDZILLA gets new lungs! Awesome, REAL nice on the eyes and ears, equals TWO 👍👍 thumbs up! Superb design by TwoBros. Great choice BLOCK man...

[@nigelmarsden1981]

I got the same exhaust on my stage 2 fatboy. That with a cam, performance air filter and maximus tuner I’m getting 123 bhp

[@HarleyFatBoyJr]

what year is your fat boy and how you liking the pipes? torn between these and the bassani road rage blacks for my 2020 30th anny. leaning more towards tbrs!!

[@thebob6385]

I normally agree with your sense of style, but this time... I think that stainless exhaust looks terrible on that black bike. It's all good though. I don't have to love your bike, you do. I'm glad you love it.

[@BlockheadMoto]

“I don’t have to love your bike, you do.” Good on you man, most people would just drop their opinion and move on without including that. I feel like most people don’t get that the only opinion that matters is the persons who’s bike it is. Different strokes 👍🏼

[@grantbresley5343]

I love all black but do love the blueing of the pipes also when they heat up. Maybe take heat shields off to get full effect or afraid might burn your leg or too much heat?

[@CaffyPvP]

@@grantbresley5343 If the heat shields are stainless too he can heat treat them with a blow torch to 400ish degrees and they will have the same gold color as the exhaust headers. Same for the muffler.

[@gabrielmartin3410]

See i love the stainless exhaust. Looks good

[@Triwjhd]

Stainless Steel is so much better.

[@walterfechter8080]

I've always been a fan of two-into-one exhaust systems since the early 1970s. Alphabets (Cycle Shack) two-into-one exhaust with a turnout tip collector/muffler made their debut in the early 1970s. They helped extract a few extra ponies from Knuckles, Pans, Slabside Shovels, and early 70s Shovels. Back in the 1970s, I think Kerker made a few for the older machines. I know Kerker made four-into-one exhaust systems for the old Honda CB 750s.

[@FluxCharlie]

I got the black version for the 2019 FXDR that I'll install after my Colorado trip. Great video.

[@joshuathopper]

Be warned. They look great but after a few weeks the headers will be brown instead of black

[@doubletapdieter6570]

How'd it turn out in the FXDR Charles?!?! I'm looking at the same setup.

[@denalixx9261]

That exhaust sounds fantastic, can't wait for the performance test. On another note, I have a channel suggestion for you, a KZbin channel called CB media. A young man from Georgia who writes for a car magazine, he's been living in Thailand for The Last 5 years. He has this insane motorcycle video, where they drag race these little 100,125,150cc motorcycles and the 150cc, they do, 9 second quarter miles on these little skinny tires, these little skinny Asian guys. it's insane, not to mention the numerous other videos with car meets, bike shows, motorbike tours, not to mention the Thai women. 😍 Keep making the great content and good luck. 👍

[@highwayman1218]

Hopefully they've come a long way with fit and finish.... Initial exhaust on my 17 Dyna LRS. Worse fitting exhaust Ive ever put on a MC and Ive owned alot (especially the headers to muffler connection). Was always messing with it to fit right and not lose the end caps. Cerakote finish looked like it had 3x the miles it actually had. Sold it off cheap and switched to my current D&D Bobcat, was an instant bump in torque and HP. Zero issues 15k later. Went with their 2 into 2 as my initial exhaust on my 16 Streetglide and broke the X- over pipe twice in 5k at the welded bungs right off the pipe. The 3rd pipe replacement I sold the thing cheap and went with D&D Billet Cat. Zero issues 25k later. Hope you have better luck with their products than I did, Ill never use em again.

[@lifeofjustinjames]

Got a TBR exhaust on my sporty and man I love the refined tone along with the performance benefits. Diggin that you also broke up the blacked out look with this exhaust

[@crowythebutcher6127]

Refined? Mine was just as loud as my two into two drag pipes haha

[@BlockheadMoto]

This ones def quieter than the 2-2 Bassanis I had on there, haha

[@AdaMoto83]

Just ordered my self the 117 2022 FXLRS. Can’t wait to get it and mod it out. With help of vids like this. Awesome vid bro

[@mechcavandy986]

I have TBR 2-1 Shortys on my 2016 Street Bob and love em! If I make any changes, it will be to these. 👏🏻👏🏻

[@RFXLR]

I’m normally not a fan of the sound of a 2-1 exhaust but Goldzilla sounds sweet!

[@ethanharrison1189]

Bike looked great before but the stainless exhaust makes it look so much better! Gives it a little contrast

[@siggy2609]

Honestly the stainless pipes are a nice contrast to the all black imo. Then again, I prefer bright and flashy over dark and mysterious ;)

[@robertlumsden942]

my 131 kit came in for my 2018 heritage. Adamacs in Jacksonville doing it. i went with the S&S Super Street with the racing muffler. we shall see.

[@BlockheadMoto]

Heard from S&S that one does well with back pressure 👍🏼

[@robertlumsden942]

@@BlockheadMoto they called me yesterday and told me i had to replace my stock ventilator. i had the original one. the black one with 114 on it. i really like the stock. they are going to put the screaming eagle extreme one on. they said it needs more air so i told them to do it. i can always change it out to something else later. hope to get it today.

[@zeeshandiwan6630]

The bike looks complete with that gold TBR man! love the sound of it on my dyna!

[@gears101]

I have the tire shredder kit on my 16 RG with the TBR true duels and love it

[@Fxlrs_toddy]

Finally 🙌 been waiting for this video

[@davidstern1062]

GREAT PIPE !!! I have it on my 19 RG, love it !!!

[@mojomanmurph1925]

The exhaust sounds really good.

[@kraken8159]

Finally! 2 into 1. Best.

[@scottmorgan121]

I went with a Bassani road rage three which is a pretty sweet babe but I got to say I’m pretty envious of that heat shield, mines about the size of a postage stamp I had to actually use a little Asbestos wrap up near the throttle side foot peg

[@MultipleInterface]

Looks are subjective but I like these better. Not necessarily the shape, but the contrast of the Stainless on the black is just awesome...not at all biased! Haha I have the Bassani Stainless on my Matte Black Fat Bob

[@jessicasoffe2530]

Block i think you choosing to go with stainless was the best idea ever, black wouldn't hold up very well with the heat that engine produces... also it's going to look sick once the heat cycles turn it gold/bronze 👍

[@kylecroft7221]

Great looking exhaust. Sounds good too. However once I added the S&S 475 cam I had a MAJOR power dip at 3k rpm. Just switched to the Thrashin ‘AR’ exhaust, picked up 12 torque at 3k RPM.

[@delilahzx10r47]

So you lost alot of power? I'm wanting to put that same cam and exhaust in my 22 117.

[@jonnymac8925]

I just ordered a two brothers comp s gen 2 in stainless for my 2018 Sportster and as beautiful as for newer style cans are I would LOVE if they made a turn out for the Sportster! This will be the 4th exhaust on this Sportster lol

[@billyrae1903]

Top video why didn’t you get it seramic coated

[@levib4233]

Good stuff Block, that’s the same exhaust I’m going to put on mine, if I can ever save up some damn moneys

[@mikeessary4925]

Definitely do another tune Block. Congrats on your new exhaust!

[@charleskieth6129]

Are you gonna powdercoat the heat shields to keep that black and gold theme? That would look sick

[@mikegyver6265]

I was thinking the same

[@uno2462]

Excellent video Mr. Blockhead and the new sound is music to my ears. I predict 6 - 8 more ponies at the dyno.

[@osvaldomacedoneto9592]

I can’t wait to see the brakes upgrade!

[@prolife8079]

congratulations, awsome sound TBR 👌👊

[@wiseives]

Looks and sounds great. Did you notice any power difference before the DYNO?

[@BlockheadMoto]

Fo sho

[@mechcavandy986]

@@BlockheadMoto do tell.

[@stephsandman5473]

you have a great eye for design. love the 2-1

[@MotoAviator]

I may have to get one of those for my new Harley... what? What new Harley? ;)

[@fps636]

New Harley, old Harley, ANY Harley will do! Ride on....

[@william995]

Awesome video block!!!!! Keep it coming 👍👍👍👍👍

[@itzmurphylee]

I have the same exhaust on my FXLRS and love it!

[@bjorn1583]

she is breathing so much better now, cant wait to here her after the tune

[@scout9937]

Sissy bar? Size/name/price/number? Looks good

[@patrickflanagan8008]

A beautiful bike and it sounds brilliant. Nice one matey,

[@joshp5795]

I have the same exhaust on my 2018 road glide and I love it

[@candlstudios]

Not gonna lie.. it sounds really good even across these crappy built-in computer speakers.

[@MereCashmere]

Did you need to remove the oil cooler to get to the header bolt when removing the exhaust?

[@bror198512]

like the exhaust you put on. What typ of air cleaner do you have? I can se its a S&S.

[@percarlzon7035]

I can’t lie, the black exhaust pipes looks far far far far better!

[@tincup850]

Appreciate your work! Any suggestions for wanting to change from chrome to black out look? Powder coat or just replace parts? Thanks

[@emmanuelgarcia3783]

Stainless looks much nicer than the black in my opinion, pops so much more😎

[@mike50cal.26]

Badass Blockhead!!!!man dude I wish I lived in Florida!!!the weather in Chicago/Indiana sucks after Oct!!!!!

[@kristophergreen2418]

@Blockhead watching this video I believe for the first time. I do like the two into one exhaust. What’s your thoughts on @FAB28 ?

[@paulsmale5436]

Oh my gawd look at the clearance, must be over an inch gap between gearbox and timing to the pipe. No wonder it needed spacers, their latest version of that pipe misses both by a few mm, it no longer comes with spacers. Rear pipe is longer by a tad and sits more central between gearbox and timing chest. Prob how its hould have fitted from the begininng 👍

[@MarkCianciulli]

Are you still happy with the TBR? I thinking of switch to the tbr, but I have seem some mixed reviews. Most are great, but some have report exhaust leaks and flat spots or drop in performance.

[@phoso29]

I'm a bit late to this video, but Dayuum....she sounds very nice and (as Her Two Wheels puts it) Mean! Now I want an HD so I can mod it out!!!

[@illduitmyself]

I miss supertrapp...

[@2remaynSPorter]

Love the vid keep up the good work

[@MeathedMoto]

I like TBR but i don't like the turnout collector. I wish they had the standard megaphone style collector on their shorty bagger pipe. Overall A+ man

[@donaldduck2801]

Nice vid man. I have heard them live. Standing nex to the pipe you have to protect your ears. To me they are extreme loud. Compare to my Cobra rpt 3. They are realy for the hardcore dudes.

[@jasonpender5645]

Hey Block, do you have a comprehensive list of the parts you used to customize Goldzilla. Working on my own custom '22 but curious what height the risers are? Looks like a Russ Wernimont fairing - windscreen height? If any else knows the answers would appreciate it, thanks!

[@Hadsatriani]

Damnn looks good, sounds amazing and 131 ci damnnnnnn please fill me in if you see this message! Im actually looking at a low rider st now, and i want the same exhaust, Did u put the 131 in?? Or order bike and tell harley you want it to have a 131? Thank a million ! ❤️🇨🇦

[@Yamahog]

Ok TBR Looks good! Sounds sweet. So how long till the chrome yellowed ? And just cuz' you are as picky as I am..... I would have opted for the same pipes, but have the muffler blacked out about mid-point in from the end with a stove paint dark charcoal --> into a Velvet Black or Raven color at the outlet. The muffler is too stark, being that the chrome hasn't had a chance to heat-treat yet, hence the dirty grey into Black choice. Then once the burnishing has set in .... the last length of the muffler would transition from burnished gold to black. Just sayin... :). Waiting to see the Dino Diff too.

[@danphan434]

How is the wind fairing? Does it blocks a lot of winds?

[@Amodieh21]

is this the same as the install on a 2021 Road Glide?? If not can you show us 1??

[@jasonkelloway1327]

Hey mate been following you for a couple of years , love the channel. Just wondering did you have any issues trying to line up the muffler bolts with the bracket? Cheers from Australia mate

[@felipevbgodoy]

Awesome exhaust. I would like to buy it from Brazil.

[@mrfatbobrider1969]

Nice job dude that's the system I will be putting on my Fatbob,also where did you score your bars and riser clamps from? They look cool. Just subbed aswell and have just started a channel for doing some riding around New Zealand very soon

[@artsolo5389]

Question, is there supposed to be space between the flange and head port? Or is the flange supposed to be flush up against the head port? Just installed Vance and Hines short shots on my 18 fat bob and there’s space between the flange and head port and it makes me lose sleep. Help?

[@ajeetvirk]

What made you go with TBR instead of the Bassani 2-1? Also, does the TBR have a deep clean tone or does it get raspy? I’m looking into getting a 2-1 for my FXLRS

[@GrassRootOutdoorWork]

Ajeet Virk I was thinking the same thing. Also looking at the Bassani Ripper 2-1

[@ajeetvirk]

Joshua Sharpe I’ve been trying to decide between the Bassani Road Rage and Fab28 Industries, but the TBR 2-1 seems to be very popular. Problem is I haven’t heard any of them in person and I want my bike to have a clean and deep tone that’s not going to be annoying on long rides

[@GrassRootOutdoorWork]

Ajeet Virk same here. I have street cannons on my street glide. It want something a bit more aggressive for the FXLRS. What I need is an exhaust subscription...

[@BlockheadMoto]

I’ve gone w Bassani for years, wanted to change it up a bit. Plus we did the 2-1 TBR on the giveaway bike and it sounded great, helped my decision 😁

[@ajeetvirk]

BLOCKHEAD between the TBR and Bassani, which has the deeper and cleaner sound? Also which you suggest is better for long rides? I’d prefer to have an exhaust that doesn’t blow out my ear drums when I’m just cruising lol

[@robman0027]

Did your rear pipe get crazy hot in your leg? Not quite sure how I want to mitigate that heat

[@theslowride4948]

If you ever need a buyer for the 2-2...

[@RealJhill]

Installed same exhaust, heat shield touches foot control and is very very close to engine case. Not sure why

[@Brandenburg008]

Looks good😎👍

[@AdaMoto83]

Sound amazing bro! Will the heat shield turn gold too??

[@BlockheadMoto]

Yup!

[@AdaMoto83]

Will look awesome bro! 👌🏾👌🏾

[@capcam_moto8719]

If you could get black heat sheilds for that, It'd look sweet.

[@WestCoastWeasel]

What flanges are those? Do you still recommend?

[@whoewasthatit]

I was gonna put a tbr 2-1 on my sportster but the rona made everything out of stock every store online so I ended up with a bassani road rage 3

[@lancasterjim2441]

Did you end up installing the copper sealing washers between your bungs and 18mm adapters?

[@arielmartinez1747]

Love your. Ike bro sick I can’t wait to I get me one not sure exactly which one I’ll get

[@arsyadgafli8749]

looks good block!!

[@arsyadgafli8749]

deff should powdercoat it black

[@BlockheadMoto]

Black finish doesn’t hold up over time with high heat

[@arsyadgafli8749]

@@BlockheadMoto damn you actually replied, yeah thats true tho, either way it looks amazing

[@BlockheadMoto]

Arsyad Gafli - I always try to reply if I can find the time 😅

[@arsyadgafli8749]

@@BlockheadMoto im beyond happy you took the time to reply, basically my favorite motovlogger...keep up the good work block

[@MKYRR]

Just got rid of my TBR Megaphone from my LRS. The fact that you have to space out your right side mids an inch is ridiculous. Couldn't ride aggressive in the hills. I even managed to scrape the tip mid curve.

[@spokes1355]

If those bassanis would fit my 22 model I would take them off your hands buy I want the blacked out tbr turnout

[@pics-by-pete]

so nice.

[@nonya8956]

Is it as loud as the python rayzer that’s what I have now love the side dump exhaust but the python is horrible for performance

[@Triwjhd]

You should get gold lyndall brake rotors!

[@bigdave2073]

Blockhead, how tall are you out of curiosity? Was watching your gear video from last month and wondering about the seat and windshield you recommended. I absolutely love this build you've made and can't wait to see the final HP, I've been on an Iron and I think this is my next ride.