Can the performance match the looks?

[@andrewhawn7121]

Love the center console thing. Put your scale divorce papers in there

[@blastarrow5938]

There's even a scale Yeti cup in the spare parts bag

[@dankforest]

Truth. I think there is an empty wallet next to those papers. But it could just be the useless leather flap i carry around for no reason....

[@ryano8613]

Ohh snap

[@StinkyColas]

It's 11am for me and you sir have already won the internet today. Such a good comment 😂

[@proraptor4146]

Thanks for the laugh 😂

[@matthewehiggins]

Tip on installing the body: flip the truck over. Instead of thinking of it as installing the body on the chassis, think of it as installing the chassis on the body. Just flip it over and lower the chassis down onto the body. So much easier. This works for all crawlers with hidden body mounts. Only rigs it doesn't work well on is doll house trucks loaded with scale accessories, but for the CJ, JLU, JT, etc., it makes it much easier.

[@bacongl]

Yeah I learned this with the JLU. Great tip.

[@blastarrow5938]

yep, I have the JLU and the Early Bronco, that really helps. You get better with practice too.

[@Griller1977]

​@@blastarrow5938You're right about the getting better with practice, but my hands just decide they don't want to grab those damn little clips even with the extra tabs some days. Damn carpal tunnel and early onset arthritis suuuuck for stuff like this. I've taken to keeping a small set of needlenose pliers in my pocket kit just in case I need to get the body off quickly.

[@garybeckwith9045]

Saving my allowance for one. That said, here in Japan, my friends and I crawl on Saturday mornings. That means Friday night is prep time; battery charging and installation. It keeps us out of bars and we can still have beers while tweeking and prepping. Like most folks, we bring more than we can run vehicles to our site (3 hours or so because we're old and have wives who allow us this time before chores). Set up time don't mean squat! Great review!

[@Mr.NiceGuy80]

My very first vehicle was a 1978 CJ7. It didn't make me the coolest kid in the high school parking lot, but girls loved riding home from school in the summer time with the top and doors off. I really miss that Jeep.

[@scottnorton6834]

Mine was a 79, sold it 25 years ago. I regret it to this day

[@Mr.NiceGuy80]

@@scottnorton6834 I have two cars I miss dearly. My jeep and my 1972 Chevy Impala 4 door (my second ever car). I'd trade all my cars I have now to have those two back again.

[@HarleyDesignsInc]

My first car was a 97 TJ and it absolutely was the best for giving those summer rides!

[@thecandyman9308]

So, if a '78 CJ7 didn't make you coolest kid in your high school, what exactly were the cool kids driving?

[@Mr.NiceGuy80]

@@thecandyman9308 there was a guy that drove a lingenfelter tuned Chevy Tahoe. He was the coolest kid. He also had a Chevy s-10 extended cab with a wall of subwoofers in the extended cab part. Money won the popularity contest, which I didn't have any of that. Lol

[@fernsolo]

That's a nice one, kudos to Axial 👍

[@R_Long]

This will fly off the shelf!! It looks like my built TJ, fenders, armor, and cage.

[@HarleyDesignsInc]

I think many will feel similar. It will definitely be popular.

[@aegixxer1]

Axial nailed it. Looks incredible and actually makes me want a 10.3.

[@r.s.customz1502]

Look closer. And you’ll notice

[@bcochener]

Man that’s a looker for sure! Beauty.

[@kylehawes4287]

I want one always had Traxxas High trail Ford couple mini crawler but i want my first axial awesome looking wow impressive

[@Fallout_-eb4pv]

On my old 10.3 early bronco I melted the nub where the clip goes and made it snap in place instead of clip

[@2superblus]

This is a Damn good looking Scale Truck, and I am not a jeep fan at all. Axial killed it on this RTR.

[@joshuasanderson1007]

I'm excited, just in time for winter in Missouri. It can sit on the bench so I have something to stare at.

[@HarleyDesignsInc]

MO winter isn’t so bad 😁 Can still get out here and there. I miss MO!

[@madmikecustomrcrockcrawlers]

Center console could be a good spot for a on and off switch. Awesome looking Jeep. Glad that companies are bringing back the CJ body style. Awesome video Josh

[@chevyon37s]

The only on/off switch you need is plugging and unplugging the battery plug!

[@madmikecustomrcrockcrawlers]

@@chevyon37s have you seen how difficult it is to take the body on and off?

[@RandallRCTherapy]

Deadman switch goes there!❤

[@rabidbobcat1621]

THAT LOOKS AWESOME

[@Andy_C_aka_Cliff_McCrawl]

I’m a Toyota guy but this looks so good, I’m getting my first jeep thing.

[@theminiline5156]

Now we just need a TJ and we need the CJ and TJ in a 24th scale.

[@mikehagquist5198]

Scx6 CJ would be awesome.

[@donniehunter309]

Nice. Would have liked to see it come with a highline hood/tube fenders to match those clearanced rear fenders.

[@richletourneau4628]

About time!

[@nuge74]

Awesome, a proper looking CJ7, well done!

[@D.C.Johnson]

Excellent reveiw Josh. You def pointed out some things others didn't catch. Good looking rig.

[@jaredgreen502]

This looks super nice & so realistic. Nice work Axial 👏 Now we get see all the comments whining about this being a Jeep.

[@220swift]

Should look good running on the Rubicon / robs resort?

[@shaynejenkins446]

for photos. but its a roller for sure lol

[@Uk-tj]

This has to be the best from factory looking crawler ever released, is on my to buy List for sure

[@kennethrobinson9008]

Just awesome! Suspension tuning and it is a winner on the trails.

[@HarleyDesignsInc]

Definitely needs lowered and firmed up

[@scalebuildersguild]

Show me you shot the running video the night before release, without telling me. 😅

[@chrisinwi5124]

The SCX6 version of this better be coming soon

[@HarleyDesignsInc]

It would be soooooo tall. But would look great!

[@robertmartin4135]

Can you be wearing more Vanquish stuff while reviewing an Axial?

[@HarleyDesignsInc]

You know VP makes a ton of Axial aftermarket parts right? VP has worked and still works with Axial on many projects.

[@seniorxj2931]

You guys need to do another collab build-off except with 1/24 scale and centered towards performance!! Great vid!

[@GeorgiaBoyRC]

Already ordered. I've kinda of got a thing for Jeeps. Especially old Jeep. RocHobby did the same thing around this time last year to me! Keep these great videos coming!

[@DSMOffRoad]

Let’s go!

[@sunriserc1033]

So sick. I want one. Get me off my bum and making videos again. STOKED!!!!!!!

[@billtrimble4882]

I have the other CJ7 that came out, it’s a shelf queen. I’ve been waiting for this for some time. I had two 1980 CJ7s, now I can get one again.

[@JimmyB55]

Nice looking rig

[@CasperRc81]

Oh my Fricken word magnum. I have to have this. Born 81’ these are the jeeps I’m used to, absolute favorite is a CJ. Brilliant!!!

[@jimbocreationsbu8203]

It is a very good looking rig Man I wonder if we'll see an scx6 version which will be a dream

[@sameold77]

Was the drag brake off? 14:37 Is it configurable? Thanks

[@FullSendRC220]

It reminds me alot of the scx10.3 bronco with the exposed cage and opening doors

[@kamikaze337]

Nice . The color looks really good on this one .

[@HarleyDesignsInc]

I’m pretty pleased with the grey option myself.

[@ridgerc5976]

This running footage must be the rc'ing you had to do after worked you spoke of during the live stream. Lol

[@garybennett7026]

Are axial going to sell the body separately to fit the scx10 3 builders kit 😅

[@HarleyDesignsInc]

I don’t think it will fit with that transmission.

[@michaelellis5109]

That is Bad Ass. I have a few Axials and absolutely love them. Of course I have them all tricked out and operating perfectly for what I want them to do? I will be purchasing this one next. Thank you for the informative video!

[@blakersen]

Just sand down inner fender flares a little bit so it fits better?

[@thelittlemoontravelers]

First release in some time I am going to have to pull the trigger on. Well done Axial!

[@toeshifter]

Mine !!!

[@toddbertram6556]

Badass, 10 years late but awesome, now maybe a scrambler body to boot

[@xr70man]

I want it wonder if it will come in kit form it would also be cool for an scx24 version

[@HarleyDesignsInc]

Horizon hasn’t been pushing kits, I’d confidently say this will not come as a kit.

[@xr70man]

@@HarleyDesignsInc that’s unfortunate l have always preferred kits to rtr’s but I will definitely be getting one of these

[@1598hi]

I appreciate that you demonstrated at least a little of the higher speed driving. Nobody seems to do that (maybe because its difficult to film)

[@grahamfuller12]

Next up, they'll have to make a Scrambler CJ8 version with longer wheelbase.

[@HarleyDesignsInc]

That I would love.

[@christiantoole8357]

The OG black and green Wraith is the best looking Axial in my opinion

[@HarleyDesignsInc]

A classic for sure, but I’ll take Jeep hoods over Samurai hoods. 😁😂

[@michaelellis5109]

I agree. I absolutely love mine. I put the Pit Bull tires on some anodized blue rims with the black bead lock rings. It just takes it to the next level. Happy RCing to you.

[@rabidbobcat1621]

Now we need a 1/6 version lol

[@HarleyDesignsInc]

It would be cool on the SCX6 for sure. Although it would be huge!! 😁

[@rabidbobcat1621]

@@HarleyDesignsInc I mean I could add another garage onto the house just for RC haha

[@dirtberger4533]

I had and love the CJ7, but mostly happy they went with a Oregon license plate, tired of the CA. Plates, plus I live in Oregon. Dam I hope the body is available separately?

[@Mike_and_Life]

It looks so good! Great video!

[@stephenr6427]

I never even thought about needing a jeep but this one is very good looking think i might have to get one thanks josh have a great Christmas 🎉❤

[@chertrocktunnelgarage2171]

Nice progression up from the Early Bronco model with straight axles. Wonder if the Axial Rock light for the Bronco will work with this 2n1 esc?

[@blastarrow5938]

Same ESC/Rx combo that came on the Bronco. Pretty sure that the Axial rock light set just runs off receiver power should work on just about anything.

[@proraptor4146]

Wow it looks sooooo good

[@vbspeed7571]

Rite in time. I need a new Axial...the red one 🎉🎉🎉❤❤

[@jdsrcs8061]

Such a cool rig. My YJ has most of the same mods!!! So much fun to drive and wheel!!!🤘🤘🤘

[@bluegroovemodelsports9650]

Nice truck. Great video

[@ronnybraswell588]

Love the details. The Gladiator body took some getting used to, but as I sit it down, I pull the fender out to clear the inner fenders. Can you do a video on changing the wheelbase? It would help us save time figuring out what needs to change and how much.

[@cjv29er]

The VP Falken WildPeak would look awesome on this. As well as lowering this rig.

[@HarleyDesignsInc]

Both would definitely be on my list.

[@brandonbrooks6210]

Seems on par with my 10-3 early bronco as to being a pain to take on and off. Looks amazing. As with my bronco I figure this will be more show than go without swapping to shorter shocks and adding some brass or aluminum to the axles. Glad to see a two door open top jeep from my childhood other than the mashigan.

[@blastarrow5938]

On my early Bronco I used a long bolt and mounted the shocks through the same hole as the lower links (the way the 10.3 portal does) and it made a big difference without having to change shocks.

[@HarleyDesignsInc]

Just glad this one has proper round headlights!

[@AUBREYTHOMAS1979]

Another epic video😊. Damn.... now I want another RC.

[@GrimJerr]

The CJ7 Body does look very sweet and eye candy for the scale lovers from an RTR and definitely the hook. The mounting system does make it a big ? if it becomes available as a body set or parts option at Horizon. I'm sure there are Jeep fans who can make the jump to another chassis happen. Fun to see what you and Matt do with these in the potential build off promotion, looking forward to it.

[@Bot_Brad]

Clear Body and Parts are available on Tower Hobby for $179 minus inner fenders

[@frankhernandez739]

Awesome . Buy for sure .

[@RCShepski]

Putting the body back on reminds me of my Traxxas Defender body brutal

[@timvanasen9822]

Being a Chevy enthusiast I like a straight axle Jeep CJ7 axial nailed this platform it's versatility to change the motor cover to an LS style heatsink cover has me intrigued, great review Josh you pointed out things I'd notice butt overall this is a great platform, nice spot you have to make video's lot's of obstacles, great video thanks for sharing 😉👍

[@yodapig]

I can see you cutting out the bed cover and 3D printing a large Pelican case/trunk as a battery holder - then you could leave the body in place!

[@Jerroldbubbataylor]

It is on my wishlist

[@markcargill1185]

I have an 85 cj7 in French grey, I need it for a mini me, I just need to find a leaf conversion for it.

[@chevyon37s]

I absolutely love the body and tires on this one! But dang I’m finding it hard to get excited about getting one at $500 for a rig where I’m going to spend that much just putting new wheels and electronics in it as soon as I get it.

[@FiveFourRacing]

First thing I thought was that cage looks genright

[@HarleyDesignsInc]

I’m just surprised it’s not more branded as such.

[@FiveFourRacing]

@HarleyDesignsInc from the looks of Matt's video they branded the red one genright

[@bucksrcworld8119]

Rcpatinaguy is gonna make an epic weathered mismatched paint body with this. Great first look Josh🤙.

[@ryand4786]

I don’t have any Axial rigs yet, but the body mount is reminiscent of RC4WD.

[@woodenshoe788]

The early bronco has the same issue with getting the body mounted back on.

[@mlay910]

Would love to see some Knight Customs parts to fit this body on a VS4-10 chassis.

[@FluffySunnyB]

I need to say the driving vid. was excellent and very impressive. It gave a very good example of the driving capabilities of the jeep. Cu does to you. I really enjoy your content.

[@dakotafox4993]

Might fit some spare body clips in that console

[@rodblaine2514]

Very nice. I've been wanting to see a CJ7 shell for a long time. I still wish they'd give us a simple, inexpensive lexan version.

[@stunod-RC]

Nice Shirt and Hat.. I’m sure Axial will appreciate that in their review.. 😂

[@tomlucasrccrawlers9108]

Thats cool. Now do a square body long bed Chevy with a full drop-bed.

[@Pauly_______]

Love the look. I'm curious as the body price as well. I'm not an avid crawler and purchased the scxiii Cherokee not knowing I would be happy with the honcho.

[@pwrofgrayskull]

Great review and an excellent rig. I’m smitten.

[@chopmaggot]

I’m not familiar with the spectrum smart Esc systems. I run deans in all my rigs. Will the system still work without the smart wire being utilized?

[@HarleyDesignsInc]

Yes absolutely. You just wont get battery telemetry but thats no big deal!

[@TheAlonzof]

Will the VP origin axles housings swap out with axial internals on this jeep?

[@HarleyDesignsInc]

The only compatible parts are the gears, none of the other parts will work.

[@beng.6417]

You need to make the Daisy Duke Jeep build with Daisy herself behind the wheel.

[@jerryvolpini7987]

WOW! 😮 They nailed it, looks great! Body is beautiful, despite being a pain to take off/reinstall (maybe hide the esc on/off in the center console.). Curious why Matt's has colored lenses and lights? Going to add one of these to the fleet! ✌

[@Griller1977]

That center console seems like the perfect place for a dead man's switch. I was thinking the entire time you were doing the battery install that it doesn't really seem any different from my JLU... And it's only slightly different. The main problem I'm seeing is on my JLU I can flex the body out to turn it on and off if I don't want to remove the battery entirely for a short drive between locations to run it.

[@clintdyson5765]

Yes the gladiator body is a pain in the ass to get back on right. But this cj7 is awesome. I will deal with the issues I guess.

[@guest6423]

This looks absolutely great, and will sell like crazy. Honestly, Josh shouldn't be reviewing the products of competitors. He has a huge conflict of interest. I know of no other company that reviews their direct competitors. He is hyper-critical of others' products, but doesn't show the same criticism of his employer, Vanquish. We all like Josh. He's a really nice guy, and we enjoy the videos he produces. We can do that AND admit that it's not the best when an employee of Vanquish -or any other company- reviews the products of their direct competitors.

[@3gearrc]

Vanquish has only been a competitor for less than a year though as they always focused on high end kits and upgrades, it is only recently that they offered anything comparable to what axial sells. And josh was doing this long before he worked at vanquish.

[@HarleyDesignsInc]

I’m an RC enthusiast, I do what I do because of it. These companies know what I do and who I am. They send me these knowing all of these things. Things I say about the products I have direct involvement in are likely different because the things I often feel strongest about are covered in the design. That’s why many people review things.

[@RCNewbieGuy]

First, I just realized I watch your videos all the time and haven't been subscribed. Done. Second, great video as always. Great looking CJ. The scale details are great. Looks like it handles pretty well too. Can't wait to see what people do to improve this vehicle. Personally a silent esc/motor combo and a good engine sound simulator would be my first upgrades

[@mrluck101mobile]

I think we're seeing the next wraith with this one. I can already see putting some 2.2s on it and widening the stance

[@HarleyDesignsInc]

Definitely would give it that southern wheeling style

[@Djkommode]

I may have to buy just the body for my current jl

[@billderas3420]

Extra body clips can go into the center console. Could this be redone as a "hard body"? Your one-handed driving still amazes me.

[@buysncharge]

Should be a kit. But it's ok. That ESC is dudu

[@RandallRCTherapy]

Dude what a great review! But it’s loud wine sucks!😂

[@TheRCBuildersPost]

Axial and a jeep!? Never seen that before! 😂

[@mikeharris7885]

Would removing the roll cage harm the strength and integratory of the body - trail walking only?

[@NoodlesNJ1]

If you had to choose This or the TRX4 21 Bronco ??

[@CasperRc81]

Vanquish curry sway bar out back be looking nice.