Harrop Lotus Exige V6 | TVS1900 Supercharger Kit Technical Review

[@sonderambition4077]

anyone else thinking about pairing this, a 2gr fe, and an sw20 😍

[@dylan4972]

A few of us have already. It's a great engine.

[@VertigoGTI]

almost... except I’m thinking AW11

[@jdalzell3354]

Yes.

[@jeremyb4493]

One or 2 have supercharged v6 rav4s as well : )

[@frnciscob1]

It’s 9k for the kit tho 🥺.

[@QAT4969]

i could imagine the torque when mated with my 2GR-FE 2014 GSR55W. i'm in love. one fine day....

[@dylan4972]

I think I would have went this route if it was released a few years beforehand. Very nice and simple over a turbo setup.

[@yuchenwang2073]

Absolutely nuts to see a 506 wheel-hp exige... Stock 350 already feels scary fast. Feeling sorry for the tires (and the neighborhood)

[@tomindenver1331]

i have a 1320 on my '05 Elise and can say you guys build superb products!

[@tranwrx]

Wish y'all made one for Lexus GS350 RWD 3.5 v6

[@katsungchan3599]

This supercharger is designed for the 2GR-FE? So that means it should be no problem putting this onto a Camry or an Alphard with the 2GR-FE V6, since those are also transversely mounted. Just have to resolve the packaging in the engine bay myself

[@fatdat7]

what gearbox mods are required for the 500hp E85 upgrade. i thought the cup 430 had maxed out what the gearbox can handle?

[@MR_71_BLACKBIRD]

Kaps LS7 Sequential

[@trianggaindralukmana2184]

E153 gearbox

[@thedoctormma9433]

It's always great to see race proven car parts 💯

[@MethmalDhananjaya]

This motor gonna be used in new Lotus, it also gonna come with AMG's A45s 2.0 Motor with DCT, I wonder tuned Toyota could outperform that AMG's twin turbo 2.0 Motor?

[@chon4413]

Thats why i love toyota

[@JH-jo9wt]

Yamaha

[@r.a.p.k.models4160]

@@JH-jo9wt yamaha? Last head block was on a lexus

[@JH-jo9wt]

@@r.a.p.k.models4160 All toyota / lexus engines are designed / engineered by Yamaha even the LFA V10. Yamaha used to make F1 eniges in the 90's and thier moto GP bike / engine along with Honda's are untouchable

[@r.a.p.k.models4160]

@@JH-jo9wt i not sure ,i have seen documentaries saying ,yamaha work on cylinder head specifically and in certain amount of engine not all engines.

[@HachiKamuri]

​​​@@JH-jo9wtToyota mostly designs their own engines, Yamaha has only designed a few engines for Toyota (2ZZ-GE, 1LR-GUE) but they mostly just make the G heads for existing engines (2T-G(E), 4A-GE, 2JZ-G(T)E, 2UR-GSE, etc.). The 2GR has an F head so it's by Toyota

[@VeneraSGF]

So this works with is350. The toms kit has been discontinued. Only kits now are centrifugal no whine

[@mikemasterson5437]

I own a 2014 Toyota Avalon. What would be a good match for a stock motor?

[@ImBarryScottCSS]

Some gearboxes wear harmed in the making of this video 🤣

[@cath2035]

Would love this setup in my 16 Venza!

[@TonyKingHongChan]

May i ask will this kit fit into a new Emira? dealership did mention that the new V6 3.5 will have 400 hps, and if your system can install into Emira, how much NP will that d\add?? Tony Thanks

[@ヤス-n3f]

I live in Japan and own a V6 Exige. Can you tell me how much oil to put in the supercharger of a V6 Exige 350 Sport?

[@fredmercury1314]

Can this all be fitted to an early non-supercharged Evora?

[@Rex_Racer]

I’m wondering why they stayed with a positive displacement supercharger (Roots), when there is a more efficient option with a Whipple type that compresses the air and transfers less heat?

[@earthstick]

I always wonder if any of the external casework can be made from carbon fibre to reduce weight.

[@armydog20]

I know I'm few years too late, but can I put this on a 2013 lexus gs 350 with the 2GR-FSE engine?

[@BobbyDazzler888]

What is the cost to upgrade to run at 500 hp on a supplied 350 exige? Is it possible to switch from e85 to ron98 electronically on the fly?

[@jasonruch3529]

😮can I put that kit on my 2022 v6 toyota highlander? Think it's a 2ge-fks 😊 I REALLY NEED MORE POWER! that kit looks like it's as close as oem as I can get? Considering the 2 engines are the same what gains (if this is possible) will I see?

[@aztilayexclusa9631]

Would it fit on camry 2007 v6 2grfe?

[@kahlonjatt09]

Yes but there's no space for the intercooler cause the space is not much under that hood of that car.

[@watnw2411]

Yeah thats what the trd aurion was

[@TheThebigkiwi]

I wonder if this will fit on the RAV4 V6 motor. It would be the ultimate sleeper.

[@braddeicide]

Is Lotus going to integrate this into a new model?

[@yurikashorov3210]

does the kit bolt on 2gr fse in a mark x or crown athlete, I wolt mind if I have to cut the bonnet

[@gramos198]

Would this fit a Toyota Sienna 2013?

[@virgilpalmer2427]

Amazing

[@thepartypotatopooper6354]

just wanna ask,do you have any problem with heatsoak?

[@nelsonhernandez2513]

Thinking how I can fit this in my sienna engine bay

[@VincentChiaro]

Great video! I had a TVS1320 on my 2ZZ engine Exige S and had a supercharger failure. Can it be rebuilt? Anyone in the US you would recommend to do that rebuild work? @harropTV

[@chrisnas1483]

Where can I get this supercharger for my 2013 toyota camry v6 xle ?

[@jlawb]

I wish I had this in my 06 Rav4!

[@Timeforchangenow]

Watch your transmission explode!!!

[@clyntondryland6734]

Would this fit n run on a toyota blade 3.5 v6 obviously cut bonnet ect

[@casparharte]

I am dreaming of 650 hp, for it to keep up with the current super cars in the straights.

[@casparharte]

I guess turbo + supercharger + fully build forged and sleeved.

[@JH-jo9wt]

I'm thinking 3.7 stroker (pankl has made one for an Aussie which had 800hp), tvs2650 pushing 18-19psi plus an interchiller which is an Aussie patent to freeze the Intercooler very cool shit pardon the pun. Komotec 7sp sequential or a custom lightweight HGT 6spd, and whatever lightweighting can be done which isn't much without spending massive dollars. But if you've got this Harrop kit with a forged 2gr you've got money anyways.

[@liamcooper5202]

@@JH-jo9wt funny because a fully forget, camed etc 2gr cost just alittle more than this setup.

[@stevenp3176]

J H The small throttle body limitations aren’t doing this system any favors either. PD blowers are very sensitive to inlet restrictions.

[@CP110]

Just run a smaller pulley... The tvs1900 can run boost in 20psi range. Throw some cams maybe some oversized valves and decent headers and you will crack 600+whp with just a moderate increase in boost. Granted your block n fuel system better be up to the task.

[@ricofowl9542]

Will this kit fit a 2007 Rav4 with a 2GR-FE?

[@RadionAMD]

@HarropTV would the 7-rib belt system handle 20psi ?

[@liamcooper5202]

Why couldnt you have put this on the TRD aurion. Or atleast intercooled the one you went with... the heat pulls so much power out on the settup 😭😭😭😭 Edit; does the TVS1900 setup fit under the bonnet of an '07 Aurion? 🤔🤔🤔

[@JH-jo9wt]

Because its an Aurion and after much discussion, it was decided there wasn't a large potential for the female market

[@liamcooper5202]

@@JH-jo9wt Take you a whole year to think of that? I'm patient, I'll wait another year for your next attempt at a dig.

[@JH-jo9wt]

Yeah unfortunately they only make em for men Liam. Sorry mate

[@JH-jo9wt]

Although they are making.a Trans Racing Division version TRD esp for trans gender and lbgtq community

[@liamcooper5202]

@@JH-jo9wt troll level: amateur. If thats the best you got, you better just go back to bed.

[@001dman]

About how much taller does this blower sit than the original toyota intake plenum?

[@santyclause8034]

From what I could see, it sits level with the clamshell and tailgate lid: 3:35

[@BigCarKilla]

Would this fit the longitudinal 2GR as fitted to Lexus IS/GS350?

[@master6435]

Yeah uses the same engine just might have to mode the hood to close properly would be epic if Toyota used this if they came out with a Camry trd or GR model

[@BigCarKilla]

@@master6435 in australia they did exactly that. Was a bit of a flip as the gearbox couldn’t hack the extra torque.

[@master6435]

@@BigCarKilla really the trans in trd camry couldn't handle the torque?

[@michatha8681]

Can you help me for search the supercharger for 2gr fe engine of toyota??

[@cantho11]

What is the weigh comparison for K27 supercharged vs Toyota v6 supercharged engine? Would that make a different around corners? Personally I love lotus rev to 9k.

[@JH-jo9wt]

k27 dont fit in the S3 only S2

[@camrysupercharger1618]

How many psi can be configured on stock 2gr fe??

[@paulsmith-ld8xl]

Will these fit Tacoma v6. ?

[@robywankenobi32]

This is something that could be adapted to a Ly7 Alloytec or similar HFv6....

[@brienchia]

Can this be installed on evora na manual? Does harrop sell a complete kit?

[@santyclause8034]

If you have the 2GR-FE V6 powerplant I don't see why not.

[@MrShanilicious]

Wonder if this will fit on the RAV4 V6 2GRFE

[@ramudithadesilva8547]

yup will

[@johnd4697]

how much for this supercharger

[@blackzacc]

Can I supercharge my Camry wit these

[@ВасилийШутка-ш8л]

Thanks for the review. Is it suitable for 2gr-fse?

[@SAOOOLE]

@@HarropTV are you guys willing to develop one for the 2GR-FSE ? as you know this engine ECU can be tuned.

[@Jdmtwofortysx]

Would be nice if they did because it’s almost like the same motor

[@SAOOOLE]

BadIsCompani I would agree with you 3 years ago but nowadays the ECU is tune-able. I have TwinTurbo mine ( 2GR-FSE ) and made 609whp/630torque 💪🏼💪🏼 however, I want them also to come up with a supercharger for GSF/RCF ( 2UR-GSE ).

[@rouscy]

on the last table you write 454hp with 98RON fuel and built engine. Is this with 75mm pulley and stock compression?

[@camrysupercharger1618]

Stok 2grfe engine?

[@techyd8411]

Wow impressive gains....not sure I could stomach the fuel consumption, I already struggle to better 20mpg from a stock Evora S 🤣

[@zazerocold]

What about Lotus Elise , pushing it to 400 HP?

[@ramudithadesilva8547]

Just by a Toyota Aurion, u get the same v6 engine as in the lotus. Lotus uses Toyota engines

[@smo0v333]

Just curious but would this set up work on a j35?

[@rcp9ty]

It's designed for a Toyota V6 instead of trying to reinvent the wheel look at comptech they already make superchargers for the j35

[@smo0v333]

Comptech is not in business anymore, I asked because of the way it mounts to the engine the j35 intake runners are very similar hence the reason for my question. I'm not sure how different the runners are so I figured the design could be made for a j series engine which would be amazing. I'd buy it for sure others would too

[@drewames254]

I want that for my 2015 XSE Toyota Camry 3.5l V6 Lol !! 🤣😋

[@FunkeeMawnkee]

Are these superchargers designed for oem engine internals? OR do they beef up the rods, pistons, etc?

[@Grimgrak1]

I bet a gt3 running e85 NA would make similar power.

[@CP110]

At peak rpm maybe if it was a built race motor, but you're likely looking at 100-110hp per liter max out of a NA Porsche motor, and that would be to the crank not wheel like the lotus in the video. Positive displacement superchargers also output good torque early in the Rev range. So power below peak rpm would be more substantial than on the Porsche.

[@Atadoftism]

For the love of god work some magic for the Camry trd!!! Please ;)

[@rcp9ty]

Why would they waste time on someone who only has a budget to afford a Camry ? When you're driving a rc 350 with the same V6 they "might" care about your wallet more... I love the Camry my first car was a Camry. I love my rav4 V6 but I'm not asking performance shops to make me stuff for it because it's a rav4...

[@Atadoftism]

@@rcp9ty because I’m not the only one and companies like to make money. I’ve seen the sienna with the lotus supercharger. Dare to be different. Get out of the box.

[@cgunner7383]

Awesomes I want one :)

[@ugazkennedy8068]

ese motor lo hubieran puesto al toyota supra

[@timelostdream]

This, swapped with a k20-k24 or even better, a F20C from the s2000, would be my daily driver. I would not even add force induction. A toy for real men!

[@hondatrix]

...and it would make more power when boosted.

[@PistonAvatarGuy]

The F20C wasn't designed to be mounted transversely, so it would be extremely difficult to put one in this car. The K series is just as good anyway.

[@aos32]

The old exige with 2zz-ge supercharged would be much more suitable for a k-20-k24 or a f20c swap.

[@r.a.p.k.models4160]

Nahh , there's corollas running 11 all motor with this engine, and here we go 🏁

[@aternateus5835]

Could you throw this on a rav4 with the v6?

[@heathwylie9082]

Was going to ask the same thing

[@jeremyb4493]

At least 1 or 2 have supercharged 2gr ravs. I'm going header/ypipe instead. Too much wheelspin on my 2wd 06 already

[@Timeforchangenow]

I'd be worried about the transmission

[@shaunjay6040]

I need a supercharger to fit my 2012 camry.

[@ericmorales4645]

Is this on the 3mz block???

[@camrysupercharger1618]

I have on 2grfe camry is worth 1300 supercharger + intercooler I received 390hp 470NW

[@daderpytortoise]

It fits on a Camry?

[@leoneldagreat2302]

Will this fit a cheysler 300

[@chon4413]

Why toyota has the best engines...

[@JH-jo9wt]

Yamaha

[@mr.buddha3657]

Please fix your audio. This video is quieter than all others

[@CodeOrangeful]

I beat soak is terrible and you loose more power then gains and I bet gear just die as I had to engine swap to achieve higher power in mine

[@CodeOrangeful]

I'm super curious to see this on track do you do track days commonly and if so. Would be open to leg people to spectate the car ?

[@JH-jo9wt]

What did you swap out to ?

[@CodeOrangeful]

Small block v8 that most people drop into the mx5

[@automotiverhapsody]

Lfg

[@miguelsalazar3239]

2G.azooR.acingF.astE.ngine

[@PT-jo4rf]

Would this fit on a rav4 v6 2grfe?

[@QAT4969]

most certainly will