Woodturning - How to Make an Essential Chip's and Dip's Bowl

Was thinking about what to turn next and this idea came to mind. Took me ages to find this large piece of Ash I knew I had .... and it still wasn't quite big enough in the end. Oh well, the wood worm eaten flat side gives the bowl some extra character.
Its sanded to 7000 grit and finished with a few coats of Danish Oil. Now time to get some use out of it 😋😁
Hope you enjoy/enjoyed, please consider liking and subscribing, even give the video a share if your up for it! Each project and video usually takes 10+ hours to finish, so your support is very much appreciated. More woodturning and woodworking projects will be on their way soon.
Instagram: harrysmith_woodturning
Email for quotes and queries: [e-mail]
Disclaimer:
My videos are for entertainment purposes only. I am still relatively new to woodturning and some of my techniques might not be the "best" or safest. When using any tools or machinery always read and understand safety/manufacturers guidelines.

[@armus550b]

Look at that traditional grind on that bowl gouge. What a rebel.

[@DennisDolan-fl3mw]

I've been wanting to turn a dip & chip bowl. Your video helps give insight to how it's done.

[@jeffmchale5826]

Just added one of these to my "make on for the house" list. Lol.

[@ralphmiller3266]

Love it

[@HarrySmithShorts]

Many thanks Ralph 😃👍

[@solidarityworkers6900]

Wood chips versus tortilla chips. Great useful and attractive piece.

[@HarrySmithWoodturning]

Thank you! I like both 😁👍

[@TazioCostantini]

👍 Nice idea!👏👏👏

[@HarrySmithShorts]

Thanks Tazio I appreciate the comment 😃👍 If you haven't already, don't forget to subscribe to my NEW shorts channel 😉 thanks for your support !! kzbin.info

[@yukaharada215]

good!

[@HarrySmithWoodturning]

Thank you! 😊

[@stephanielovatt2787]

Looks good! All ready for the next party!

[@HarrySmithWoodturning]

Thank you Stephanie! I like your thinking 😁😉

[@DeanG55]

I liked all the worm holes!

[@HarrySmithWoodturning]

Thanks Dean! 😊😁

[@thedevbros8941]

Dude that’s so awesome

[@HarrySmithWoodturning]

Thank you so much! 😊😁

[@geraldstamour1312]

Dope AF job, Harry.

[@HarrySmithShorts]

Thanks Gerald 😃👍

[@wooddesignskills6037]

Great job

[@HarrySmithWoodturning]

Thank you very much! 😊

[@gailtallent1107]

👍❤️

[@HarrySmithWoodturning]

Thank you Gail 😊😁

[@AllenOxendine]

Nice work, thanks for sharing. Full View and Like 👍

[@HarrySmithWoodturning]

Thanks as always Allen! 😁😊

[@mountainviewturning5319]

Looks great 👍

[@HarrySmithWoodturning]

Thanks very much! 😁👍

[@richkeelan1312]

Real nice chip and dip bowl well done

[@HarrySmithWoodturning]

Thank you Rich! 😊😁

[@markfishburn8284]

Very nicely done. Thank you for sharing your video.

[@HarrySmithWoodturning]

Thanks for watching Mark! 👍😊

[@nickshelton8431]

This exact project is one of the reasons I wanted to get into wood turning. It's my next project for sure!

[@christopherslane7830]

After the first contact with the wood I knew that glove was coming. Nice work.

[@HarrySmithWoodturning]

Thank you Christopher! 👍

[@thecraftystasher]

Too Cute❣️❣️❣️ Kinda, Looks like Someone got a bit Too Hungry, and took a bite out of the Bowl 🤣🤣🤣 Perfect Ending 👌🏻

[@HarrySmithWoodturning]

Thank you very much! I wanted to keep the imperfection in the wood, perfection isn't everything 😄😁👍

[@thecraftystasher]

@@HarrySmithWoodturning So True!!! I work with Ink a lot, and go after the look of Imperfection / Perfection ~ to get that Old Vintage / Antique Distressed Look & Have actually Torn Paper, then followed up w/ Repairing It ~ For That Imperfect / Perfect Look 👍🏼 Perhaps, I sometimes carry it a bit ~ Too Far 🤣🤣🤣 I Love Your Work ! ... Keep up the Great Work ~ AMAZING US ALL 😻♥️👍🏼

[@HarrySmithWoodturning]

@@thecraftystasher Thank you so much again! 😄😁

[@thecraftystasher]

@@HarrySmithWoodturning Anytime ! I’m having “Fun” working my way back through your Videos 😻♥️👍🏼

[@msritzzy]

Beautiful as always

[@HarrySmithShorts]

Thank you msritzzy 😃👍

[@lakeshorewoodturner5136]

Awesome job Harry. Love the small flat spots you left.

[@HarrySmithWoodturning]

Thank you very much! It's proved useful so far 😁👍

[@Umberto.Goglia]

Really great job Harry, thanks for sharing!

[@HarrySmithWoodturning]

Thank you Umberto! 😊👍

[@SiamWoodShop]

great work Harry and a bonus spoon rest for the dip. Stay safe,John

[@HarrySmithWoodturning]

Thanks and what a great idea! 😁👍

[@bandicoote1964]

Really Good 👍

[@HarrySmithWoodturning]

Thanks very much Rob! 😁👍

[@gregdagg9305]

Very nice.

[@HarrySmithWoodturning]

Thank you Greg! 😊👍

[@RickTurnsWoodturning]

Excellent work, Harry.

[@HarrySmithWoodturning]

Many thanks Rick! 😁

[@GaryGlass-DriftwoodTurner]

Another great turning Harry, thanks for sharing!

[@HarrySmithWoodturning]

Thanks Gaz! Much appreciated 😁👍

[@MickyBellRoberts]

It is lovely.

[@HarrySmithWoodturning]

Thank you very much! 😁

[@MickyBellRoberts]

@@HarrySmithWoodturning You are welcome.

[@siding8]

Great work and idea! Thanks.

[@HarrySmithShorts]

Thank you for your support siding8 😃👍

[@josephinelarosa635]

Nice work Harry

[@HarrySmithWoodturning]

Thank you Josephine! 😁👍

[@Loan--Wolf]

i realy like that going to steal it if i ever get a big boy lathe

[@HarrySmithWoodturning]

Thanks for watching! Go for it 😁😉

[@sarahgillmore2486]

Great bowl ,.i love the lighter coloured woods for foody stuff.

[@HarrySmithWoodturning]

Thank you Sarah! I was hoping it was going to darken up a bit more. I prefer Ash when its more of a light golden colour 😁

[@kevingaddis7276]

Fantastic work Harry.

[@HarrySmithWoodturning]

Thanks very much Kevin! 😁👍

[@JiggsysShed]

Great work. Nice looking and useful piece

[@HarrySmithWoodturning]

Thank you very much! 😁👍😄

[@rebeccaloader4111]

Great piece, Harry!

[@HarrySmithWoodturning]

Thank you Rebecca! 😁👍

[@normakers5632]

Great idea! Really nice!

[@HarrySmithWoodturning]

Thanks very much Norm! 😊👍

[@thedevbros8941]

VERY essential

[@HarrySmithWoodturning]

Hahaha Thank you! 😁👍

[@chadwedul1787]

Saw off the corners before turning!

[@HarrySmithShorts]

No need ! 😃👍🪵🪵🪵🪵🪵

[@starengineerm2948]

Good work

[@HarrySmithWoodturning]

Thank you 👍

[@davidrieger4676]

wood worm or powder post beatle.No matter liked the video!

[@HarrySmithWoodturning]

Thank you very much David! 😁👍

[@christinepfister6033]

👏👏👍

[@HarrySmithWoodturning]

Thank you! 😊👍

[@terrytenley9327]

The flat spots really degrade the bowl.. I like the inner bowl..good luck..

[@keithcarothers2643]

I love the contract Harry, I was curious of you'd be able to list the type of wood used in the future videos? Perhaps I'm just missing it. No matter what it's wonderful content

[@HarrySmithWoodturning]

Thanks very much Keith! I usually list the wood type and the finish I use in the description. In the case of this video it is Ash 😁😊

[@taxipistolas8138]

@@HarrySmithWoodturning as Ą

[@WoodenItBeNice]

Fantastic piece Harry and I love you left the natural fault in the side. Great video harry. Take care mate. Cheers, Huw PS How old is your lathe as it looks like and old APTC Lathe?

[@HarrySmithWoodturning]

Thanks very much Huw! I didn't want to reduce the bowl to a small boring lump, so the imperfection adds some much needed character . The old APTC is definitely getting on a bit .... think I'm in need of an upgrade 😁😊👍

[@WoodenItBeNice]

@@HarrySmithWoodturning I've got the 1628 or 406 as its now called. It's brilliant

[@HarrySmithWoodturning]

@@WoodenItBeNice I almost bought one of them the other day but it wasn't to be. Maybe I'll get the upgrade before the end of the year👍

[@WoodenItBeNice]

@@HarrySmithWoodturning Good luck Harry. I believe it's Axminster's best selling lathe and also the one they take to exhibitions.

[@woutersmith7616]

Hi Harry. Danish oil is boiled linseed oil?

[@glencrandall7051]

People say sanding is boring. well in my opinion, so is turning. Especially speed up turning. It just looks so frantic. And how about a bit of narration, of at least a caption or two so that I know where you are going with the project and what products you are using. Still, thank you for sharing. Have a great 2022 and stay safe.

[@HarrySmithShorts]

Thank you for your comment Glen 😃👍I prefer to let the wood speak for itself and allow the tools to tell their own story as they make their changes. All the very best 🪵

[@leftmono1016]

It’s pretty obvious what’s going on, and it’s a type of project you don’t normally see. I’m going to try something similar using my own preferred turning and finishing methods. People expect everything spoon fed to them. Good luck commenting on all the videos you find boring, you’ve got a lot to get through on KZbin.

[@laster4496]

Hello from France. I am here for an aperitif or to admire this beautiful work? What is the diameter of your sanding system on the drill, please? Thank you in advance and good Sunday.

[@HarrySmithWoodturning]

Thanks for watching Laster! The sanding pad is 50mm, Bonjour et merci 👍😄

[@laster4496]

​@@HarrySmithWoodturning Good morning and thank you for the answer. Nice week

[@laster4496]

@@HarrySmithWoodturning Thank you very much and enjoy

[@MarkMcCluney]

Great job Harry. What was the finish you used? Thanks mate.

[@HarrySmithWoodturning]

Thanks very much Mark! It's finished with Danish Oil 😁👍

[@MarkMcCluney]

@@HarrySmithWoodturning Ah! Those clever Danes! Thanks mate.

[@HarrySmithWoodturning]

@@MarkMcCluney Hahaha No problem!

[@StuartOkorofsky]

what is the diameter and height of the finished bowl

[@HarrySmithWoodturning]

Thanks for watching Stuart! It's around 220mm wide and 40mm deep at the highest point (the dip holder) 👍

[@julesthecat9404]

What finish did you use to make it food safe?

[@HarrySmithWoodturning]

Thanks for watching Jules! It's finished with Danish Oil which is food safe when fully hardened 👍😁

[@josefinarossetti9932]

Please send me the names of the carving tools you use. Best regards

[@HarrySmithWoodturning]

Thanks for watching Josefina! What chisel in particular would you like to know the name of? 👍

[@tallyrc]

What finish did you use?

[@HarrySmithShorts]

Thanks tallyrc 😃👍I used Danish oil. Take a look in the description field (downward chevron next to the title) for more information on finishes and the back story 👍 🪵

[@josepheberle6485]

What is the wood Sir?

[@HarrySmithWoodturning]

Thanks for watching Joseph! It's Ash 😊😄

[@nickshelton8431]

Also the chipped wall is so sad! 😔

[@DennisDolan-fl3mw]

Danish Oil ??? I didn't think Danish Oil was safe to come in contact with food.

[@NoTaboos]

Why the apostrophes?

[@HarrySmithWoodturning]

Thanks for watching! It just looked nicer on the title. KZbin is all about making things appealing 👍

[@carloscarrillo1416]

Bad measuring turned with one end broken.

[@HarrySmithShorts]

Thanks for your comment Carlos, if you had read the description field you may have understood this project more 😃👍🪵 Hope you find something that suits your needs and preferences 🤔😉

[@hswing11]

That flat edge is a sorry oversight

[@HarrySmithWoodturning]

Thanks for watching Howard. I wish it was perfect but that's just the way of the wood sometimes 👍

[@lenshepherd4738]

NOt Woodturning, a excercise in scraping

[@HarrySmithWoodturning]

Thanks for watching Len! I am turning wood, just using different techniques 👍