Hasegawa: VW T1 Type 2 Bus Part 4

Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemo...
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.co...
✖My Amazon shop for US viewers: www.amazon.com...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemo...
www.thescalemo...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at [e-mail]
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by KZbin Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

[@Toppervision1]

Love watching clear coats going on!

[@dishchicken]

especially on the roof

[@christopherlynn4692]

Very informative and helpful. Thank you for taking the time to share.

[@d3amonicus]

Blijft mooi om te zien hoe de paintjob tot leven komt met de clear. Goeie muziek keuze ook;)

[@inblindmodeler8786]

Great Jop...!!! Nice look....!!! Thanks. Frank

[@davidminor1254]

For the initial blue that you painted on I thought it looked awesome with that little bit of feathering bleed instead of just masking off totally for painting the white section of the body

[@andreppc21]

hi, i would like to give you a tip, wait the clear coat dry for 24hs or more than sand it with a 2.500 or 3.000 grid sand paper with water, sand it untill it gets level than polish it with leveling copond untill there is the pait starts to get shining than use your favorite kind of wax, you will have a perfect pait job, this bus will look even more perfect ! hope you give it a try

[@TheScalemodelingChannel]

+MrAndreppc I have done that in the past, though i can still see the scratches when i am finished polishing, and i pretty much cant stand that:P kzbin.info/www/bejne/oHO5qJ6VnNBmadk

[@andreppc21]

+The Scalemodeling Channel hi, i juts wathc the video in the link, if i my correct: you need to sand it less, use only a 2,500 or 3000 grid, when sanding it use circular motions only tha is important and when you polish it use straght moviments if you do this way you will "break" the sand paper marks, when i do this i think that the most important part is the polishing part that is when you get the scratches so polishi like hell hahaha, if i may... is there any way i can send you a picture of one of my kits? it is a red 911 turbo. sorry for my english but i'm from Brazil

[@TheScalemodelingChannel]

You can post them on my facebook page: facebook.com/thescalemodelingchannel

[@gregverity9533]

I have a question. I'm building a nissan skyline 1/24 and stuffed the windows bought another kit but its an

[@rsaturn9]

Looks really good!!!

[@FragNet0]

Leuke serie om te volgen, ziet er mooi uit.

[@mijax4z]

that was veeery good! keep the good work

[@alexzarcos125]

How did you get your bus logoed, great resurrection of the van,

[@mx472000]

Would it possible to do a detailed and quick tutorial on how to apply decals and how to seal them before the clear coat? Thanks in advance.

[@robertgormley4104]

been a long time since i built models getting back into it just wondering why such a high PSI 35

[@TheScalemodelingChannel]

cause it worked for my setup at the time

[@JohnLoganMcKee03]

Is there anything special that needs to be done to cleaning the airbrush, etc. after using the two part clear coat?

[@TheScalemodelingChannel]

+John McKee Nope, nothing special, just be sure it is absolulty clean.

[@andyw3517]

Where did you get the decals from? Great work as always!!

[@TheScalemodelingChannel]

+Andy Whittington I bought them at a modeling convention.

[@balazs_modelworks]

Classic music kills Tom 😂😂😂

[@scifimodelshop]

What was the clear coat you used, do not remember hearing that in the video

[@TheScalemodelingChannel]

+Modelersjunkyard Zero paints 2k clear

[@thom3124]

Pepsi decal come with the kit? If not where did you get it?

[@TheScalemodelingChannel]

Michigan Railfan they don’t, i bought them at a modeling show

[@alexanderaase4973]

can I use gloss cote humbrol in an airbrush? for the same project and where did you buy pepsi cola decal?

[@TheScalemodelingChannel]

If you thin it enough to flow through, yes. at a modeling convention

[@rogerstriker3247]

buddy tell me where such a holder for the model to buy and how it is called

[@TheScalemodelingChannel]

Roger Striker tamiya spray stand

[@ivangarcia8516]

What clear coat product do you use?

[@TheScalemodelingChannel]

zero paints 2k clear

[@Cameron4077]

can i brush on the clear

[@TheScalemodelingChannel]

You can, but it will look awfull.

[@Cameron4077]

i use finish, so can i load it into a spray can?

[@TheScalemodelingChannel]

I have never done that before, so i can't tell.