hatsan blitz 30 cal. vice and upgrade!

upgrading the blitz

[@myfalconry76]

You need divers grease for the blitz and most other semi and full auto airguns.

[@TheManCaveMetalFab2580]

Divers grease ? Awhere can I get that? And roughly how much does it cost?

[@myfalconry76]

@@TheManCaveMetalFab2580 Amazon 8.00 it’s called KEZE Waterproof Food Grade Silicone Lubricant

[@BustedKnucklesBuildsTexas]

That’s cool , love to have one of them !

[@TheManCaveMetalFab2580]

@@BustedKnucklesBuildsTexas yeah it’s only about $860 through Airgun depot!😃

[@mxgryan]

how loud is it without moderator

[@TheManCaveMetalFab2580]

@@mxgryan it’s not bad if you live in a congested neighborhood I would probably use a moderator, but if you have a little bit of elbow room and you get along with your neighbors, you probably won’t have a problem!!

[@marksman349]

No do not use that thats silicone oil for metal on metal thats no go I got sfl 0 grease very thin good for metal on metal, I advise you take it apart and clean it all out and get some thinner grease for metal on metal not silicone.

[@TheManCaveMetalFab2580]

@@marksman349 yeah I removed all of that but the stuff you’re using is way too thick. I already checked that out. Don’t get me wrong it’s very good. gun grease but you want to use something that’s more like an oil rather than a grease however, I am using A PCP Airgun grease and a very little bit of full synthetic oil that is obviously used for metal on metal to cut the grease a little bit you want that thing to be slick as snot but not runny lol😁

[@marksman349]

@@TheManCaveMetalFab2580 mine might be too slick I sometimes had it clip the magazines I took them apart and wound em up an checked em to make sure I can cycle it with heavier weights full mag, Crazy firerate around 2000 rpm once power is turned up firerate goes up aswell

[@TheManCaveMetalFab2580]

A full magazine at a heavy weight will pull the clip down. You need to put a padding on the rest underneath the clip. The clip cannot slide down against the rest or else it will cause possible jamming

[@kcradd7618]

Can you let me know what mounting rings u used

[@TheManCaveMetalFab2580]

@@kcradd7618 copy this and go to Amazon and paste it! UUQ High Profile 1-Inch Scope Mount Rings, 2-Pack for 20mm Picatinny/Weaver Rails, See-Through Dovetail Design for Airguns & .22

[@TheManCaveMetalFab2580]

@@kcradd7618 you will also need the risers. You will need to modify one of them to fit the blitz. You have to shave down one side copy and paste this on Amazon as well! Picatinny Riser Mount, Low Profile Rail Riser Mounts Adaptor with QD Lever Lock Quick Release & 5 Slots Picatinny Rails for Scope Rings Optics Sights, 1/2" H x 2.5''L

[@SpACeCruizeR2o3]

Check out my uncles channel his handle is DK Spencer's custom kinetics I think you'll like his vids 💪🏼💯🔥🔥🔥 good shootin gunny

[@TheManCaveMetalFab2580]

Those are real guns very very beautiful custom done guns but real guns nonetheless i deal in air guns but his work is not bad. Looks really good!!