Haulin firewood, Husqvarna 44 tackles big wood, unboxing saws!!

[@robertsmith7580]

That 44 has the heart of a big husqvarna saw !

[@waynetharp]

Isn't it nice to get back out in the woods and loading a nice load of firewood again...This is how the sickness all began anyhow!👍

[@BuckinBillyRaySmith]

thank you

[@CharlesBrisco]

I have a love for small cc saws I'll cut monster size stuff with mine all the time then after I have enough in me to load an split lol 44 sounds good cool saw dolys are cool too

[@justinweaver8787]

I been lookn 4 and wantn a 3270 for a while now i love me some pioneer music. Have a great week buddy.

[@Finom1]

Always very exciting being with you. Lots of firewood to keep the family warm.

[@motordiverse1276]

Hey ! Very good clip ! Well articulated...good rythm. TYhe Husky 44...I think i have a couple of them. Impressive saws and light ! Thx for those tips ! I start to dream about going too the states....just to collect a bunch of saws that is very very rare here in Norway...but i know...they are everywhere in US. Appreciate you clips and all the cool saws you show off !

[@tazman-kennyfuller]

Heck yeah buddy that 44 is a little ripper. Love it. Thanks Rogan for the Pioneers gonna be fun watching those come along and become Tinmamized. Thank you Tinman. 🌲❤🌲✊🪓

[@tammotenter3249]

I have ported my sachs dolmar 120 super to very agressive numbers (well past 100 degrees on the exhaust). With a very aggressive chain it cuts with a stihl 500i. I had a professional test it, he really liked it. They both cut in 24" german beech wood. Thank you for teaching me all the good things that made that possible. After that he handed my a stihl 046 that doesn't run quite right which I should check what I can do about that.

[@tammotenter3249]

@Schwal🅱️e_262 yes I have, but it was not the first saw that I have ported. I actually bought this saw just to build something like this.

[@SOHN32]

P 40 only made couple yrs no decomp and chain break. Step up from farmer saw. Which was more plastic. P 40 started 1973 the 41 is basic same saw just more options. Both 66 cc saws.

[@jamiedalluge9472]

I cut up a beech few wks back with my 371xp. Less then a tank full put 3,700lbs of rounds in back of my trusty old '84 Chevy 1/2t

[@lsohweldfab6575]

Fun stuff! Saw obsession is a real thing 👍😋. Good tips with the 44 aboot smaller saws. Just bucking good times bro!

[@johnarnettsways.8758]

Love them old saws. Be safe in all that rain tinman. Love your videos

[@simpleman4224]

Man, that little 44 rips! You making my back hurt with them big rounds! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@hamishmurray5540]

Love your channel my friend.

[@randyforestier7256]

Glad to see all vintage saw. So this winter when snow in I'll bizzy watch you build saw!

[@michaelwhiteoldtimer7648]

Thanks Rogan for helping out the channel, there is going to be a great build in the future

[@stuartramage5933]

Awesome video tinman peace from Scotland stu and family

[@rogerjustice8835]

I know what you mean about cool down your saws. But I think warm ups are just as important as cool downs. I practice both on all my equipment from saws, trimmers, trucks, and tractors. I know what you mean on the husky 44s, I own a 44 white top. These are great saws just absolutely no aftermarket support on them, I can’t understand why.

[@jameswilson322]

Them big blocks of wood add up fast, that 44 is a dandy. Thanks tin man keep em coming.

[@aldredske6197]

Hi Tinman!!😀😀 Years ago we had a lady wood cutter that hand cut pulpwood for us. She ran those 44 ranchers because they were the lightest saw in its class back in them days. She had a white top 44 that I swear she cut a thousand cords of pulpwood with it and it was still going. When they discontinued she grabbed one just like yours and I'm sure it is still running. Sucks when you dull two saws in the same block. You should have known better than too put the 44 in the same cut. That's the way it goes. LOL!!😀😀 Take care my friend!!😀😀👍👍 Logger Al

[@jasonmercer9962]

Your having too much fun Tin Man!

[@jwoods345]

That 44 is impressive 👍 Your right it definitely cuts above its size. Nice

[@mikahakkinen5651]

that old 44 cutting realy good

[@stevetheriault4164]

THE TURBO WOOD WEIESEL🤣🤣🤣🤣🤣🤣🤣HOPE ALL IS WELL WITH YOU BUDDY,,I USE TO HAVE A 444 HUSQVARNA IT RAN GREAT

[@travisweldmaster7815]

Tinman hey brother miss ya I been super busy, catching up on vids and everyone and all, still here love u buddy

[@tinmanssaws]

Hey buddy good to see ya here!!

[@michaels3288]

Have my 025 torn down because after 20 plus years it finally got an air leak. I love my 025. Have a new 261 but grab that 025 most of the time.

[@tinmanssaws]

I've always liked an 025. Those were just like the 44, strong little Saws.

[@thebradleysoncatbirdhill6849]

"Ten years ago and this thing would have been in the truck!" Do you know how many times I say that, weekly??? Just love this channel and the community! 👍👍👍

[@jefferyfowler7860]

I'd love to have a 44. Nothing like working with nice vintage saws.

[@Joe_Hill.]

Looking forward to watching you port a P41, just bought one a few weeks ago.

[@2eyedjack433]

Wow the little 44 rips! Makes me think of Scrappy Doo. Lol..

[@joehackett9471]

Great saws and that may be the coolest shirt Ive seen in a long time!

[@tennesseedave6771]

I have a 55 with 20"bar. It bout same,runs strong for little saw!! Love it!

[@DaveyBlue32]

The little one’s are fun... and a lot easier on the back! Great fuel mileage too’ !! I’ve been a huge fan of the ported husky 350’s to the 353...45mm flattop setup... I remove all the meat between the transfers and toss the 359 carb/intake on them... nice little ripper with an 18” .325 setup.... or an 18” 3/8’s with the 346xp sprocket .... the 365 with a 20” is my absolute favorite firewood getter...👍😁. I got a Mac 610 on the way... starting to get some of the older ones to play with... they do sound great!!! The blue homelite is going to be my first old saw port job... I really dig the blue paint job on the old homey,,,✌️😂👍. 77cc’s!!! Those old girls gotta get down and buggie with that displacement!!!

[@markatkinson9963]

Got to watch your back.

[@squirrellyjon]

Love me a husky, got a 55 air injection been battling with scored pistons. Thinking it needs a carb kit or has a air leak. Just keeps going lean on me

[@caseycarpenter7043]

Looking forward when you work on the P40 I have my late Father’s P40 and that’s what got me into saws cheers

[@andrewmantle7627]

Tinman, I have one of those 44's; earliest iteration. It's scary how fast it turns. I keep thinking it's lean, but it's not.

[@jonathanhall136]

Sweet saws tinman.

[@307j.o.a.t9]

Man that 44 is like a mad little bunblebee!! My wife needs one of those! Her 450xtorque is junk. She doenst like my bigger pro saws.

[@codyroger9581]

A lot of improvement from the p40 on the p41.. tho they look similar they are different in a lot of little ways.. the specs on power between the two are almost the same. The p42 was the jump in operating rpm.

[@HuckBowlt]

There's no better chainsaw for the average part time wood cutter than the old 44 husqvarna.

[@pierremorin4775]

Good video thanks

[@larryreno8293]

It never fails, whenever you put on a long bar there’s always metal to be found in the wood. Now it’s gonna take forever to sharpen the chain.

[@ISOSAILING]

love your videos!! and gone and done it, my grinding wheels arived today still wateing on the timeing wheel, and got a old robin strimmer engine to start on, going to see if i can retro fit a jonsered carb to it as well as the carb on it dosnt have any adjustment needles, dont want to do my saw just now as i kinda need it working and i cant get spaires for it as its just a cheepo one, if i get my old one back off my mate its getting borted as well though!! just have to find my mini air die grinder i've never used in the 10 years i have had it haha.

[@smokeybailey3080]

The first husky I had was a 44 bought it in th early eighties still use it but it starts running bad after it gets hot I’m guessing the coil is bad do you know where I can get a new coil I enjoy all your videos thanks

[@tanneroliver4068]

Hey tinman I no this is a little bit out there but I love a black top 44 I allways wanted one if you ever come across one I whould buy it off you maybe you can port it for me lol what ever the price is thanks love your vids love from Newfoundland brother

[@justinterrell9555]

Tin Man what's the scoop on the 590 that you ported have you figured out what's making it safe pick Rich I've been looking back everyday waiting on you to post something I'm curious to find out what it was

[@davidbulich1254]

Like to see you build a second edition 346xp

[@Shrpshooter99]

Hey timman im in search of a couple hs 260 a carbs any chance you could help??? Love the channel buddy

[@jeffreyrubish347]

That 44 is impressive!

[@tinmanssaws]

Those little 44s are absolute beasts for sure.

[@82f100swb]

@@tinmanssaws You need to try one with the third 4... You ever get my email?

[@playingwivwood]

I got the early 3270 have you looked inside of it yet I was going to restore mine but got Scared why does it have more then two rings

[@playingwivwood]

Piston rings I mean there were like 5-6 of them

[@mikemorgan2019]

Thanks for always posting great content! I have a need for a saw with some gusto that wont break the bank. Looking for something that can run a 36in bar for slabbing. Limited budget here so ....any recommendations?

[@tdawg8605]

Just fixed my nephews 44. The recoil rope holder has a small crack. I know this is common. I was wondering if anyone knows where to buy parts for this recoil? Let me know. Thanks.

[@fredmetcalf]

Where are we with the CS 590 Echo?

[@jeffkenyon7084]

Quite the collection you have I think a 50 cc saw with 325 chain can keep up with a 55 to 60 cc saw with a 3/8 pitch chain makes me want to get my old 350 going it starts and stumbles won't Rev up I've messed with carb filters no change mite try a new coil I was using it allot when it broke down 5 years ago then I bought a 455 rancher it now does the same thing so I hung it up and bought a 445 series 2 it's a 50 cc with 18 inch 325 some day I want to get a 372 or maybe a 365 565 some day rite now I need heating oil and truck needs work you no adult thing's

[@7eis]

Did you check the intake boot on the 350? They'll to lean and scorch the cylinder and piston. Husqvarna has updated part numbers, very common problem

[@pm270100]

hows the dolly going

[@Piledriver2235]

Dolmar has a really unique sound to it

[@SOHN32]

You get those glow plugs straighten out buddy.

[@tinmanssaws]

Not yet.....soon

[@williamhartsell6390]

Does it have a plastic case?

[@mrxlh]

Wow, that 44, she cuts Eh?!!!

[@fredmetcalf]

I like to carry extra chains with me when I go cutting.....so I can ruin several chains in one trip....actually, so I can get done what I set out to do.....stuff happens as you well know.....

[@SOHN32]

Where the Gehl at make stuff easier on the back.

[@bumpkinrocks]

I've just bought myself a Husqvarna 362 as a project. Any opinions on them?

[@tinmanssaws]

I've never had the chance to run one of those. Probably strong like most husky 60cc Saws.

[@82f100swb]

It's the same chassis as the 365/372, 47mm bore, dual transfer port vs the quads of the other saws on the chassis. Early ones are K095(small) bar mount vs the D009 of the 365/372, as they were aiming to replace the 262. You can bolt on the top end from one of its bigger brothers, pretty much directly.

[@davidbulich1254]

Had a couple they were crankers, very good saws

[@bumpkinrocks]

Thanks 👍

[@nateolmsted899]

You need a ms 361

[@joehackett9471]

Link to shirts?

[@andrewdow1609]

"you know friends, 10 years ago, that thing would be in the truck" Ahhh yes, that later part in life when a man's mind tells him to do things that his body says...Ummmm, no.

[@timothybyrom5560]

Watch yourself. I've got three hernias from doing stuff like that.

[@nickywalsh8492]

Hi tinman...

[@hisWACness]

Noodle them brother, save yer back ;)

[@hisWACness]

There ya go! LOL

[@JMB676]

I think u could have done it but think it's smart you didn't..

[@srip63]

Wood weasel!