Hauling Scrap

[@REDBIRD-95]

Not everyone can back up a tractor trailer like that, well done Sam👍 Always love to see you guys helping each other out. Have a great weekend, Sam.

[@johnhaines6546]

It took him 7 tries and he edited the 6 bad ones out.🙂

[@kevink4914]

😂 editing bud editing so you only see good from bad. To be completely honest if he was that good would be no need to backup from road. As there is more than enough room at diesel creek to drive in and turn around.

[@ScrappyIndustries]

Now now I only had to edit out 5 tries 😂😂 depends on the day if you can turn around down there or not

[@DieselCreek]

@@ScrappyIndustriesthat’s the truth lol

[@johnhaines6546]

@@ScrappyIndustries I had to haul coal out of a pit once with a B61 with air steering and I'm glad no one was filming me.

[@ricklakes9405]

Sam you are a guy that impress me. You have a good heart and it shows.

[@jamesfinkle3681]

Good stuff. Thanks. You and Matt make a great combination.

[@steveperyer4850]

Love every video, and also when both you and Matt work together on both channels😊

[@mrluva74]

When you said Scrap. I knew you where headed to Matt spot.😅. Your a Great Friend. Talk to him into getting a Low Boy.

[@ronnieperdue2977]

In my home Alabama was a little boy i can remember the road scraper running down the red clay roads sweet home Alabama back in the day good ol memories and times

[@bjgarbauskas5948]

I don't know what Matt would do without you??! You are the Best!!

[@eddiemortontapman7252]

Making Old Iron Great Again !

[@kevincorbin6273]

Never ceases to amaze me how these diesels just keep on running

[@renem6441]

Your truck is amazing! Bring on the engine change! Thanks for sharing

[@krispetersen9595]

You and Matt make really good videos, both channels are excellent, learn so from both you guys

[@Popeyes66]

Hey Sam. You work really hard,and know A LOT. Good luck to you and Fam .

[@brettlockhart-qh8gx]

I'm up at 3:30 in the morning here in Tasmania to watch this keep up the good work

[@leol1682]

Enjoy your video Sam .

[@dwaynekennedy3554]

Great video Sam

[@johnnyhunter4345]

After my first Brownsville show, I was hooked, you tube allows you to monetize all our love of old construction equipment, thank you for saving them...

[@williamchisholm5776]

That truck sounds fantastic awesome video dude

[@JK-gn6qr]

Hauling 'Matt' Scrap ... lol Y'all done good! Fun vid.

[@gordonadams9038]

This makes me think of hanging around the race tracks . Some times we run out of time to get ready for the show and end up working on the equipment at the show . You make a lot of friends on the way . Thanks for sharing your videos .

[@jamesauriemma5605]

Excellent video!! Good luck to you. Keep making videos please. Again, love your superdog!

[@johnobiro5202]

You just love what you do Sam. We love watching you do it. 🔧👍🇬🇧

[@wileycoyotesr8623]

I like your choice of camera angles.There's always more than just one perspective to a picture. 👍👍👍

[@davidreynolds6401]

Love the collaboration between you and diesel creek.

[@noelwarner1235]

Beckwith machinery had a cat dealership in Bridgeport for years it is now Cleveland Brothers. I seen this machine setting in the mud there at your guys camping spot I wondered what was going on with it

[@chipmonkey7100]

superb work. Awsome work from you and Matt. Love it.

[@SteamCrane]

8:00 - Another D8H? All of a sudden they're everywhere!

[@SmallGrayBox]

I subbed to you channel from watching Matt's Diesel Creek a few months ago and love what you both do. Its awesome to see old machinery come back to life or 'will it run' videos. Awesome stuff 😊👍

[@richardw.foxhall3392]

Good friends good times shared challenges. A couple of nice people to watch do some fun things together. Thanks fellows

[@georgeenriquez612]

Come on Matt… get with the program on your driveway being suitable for semi trucks to pull in haha. Great video Sam.

[@markB40]

Great watching as usual, love the enthusiasm.

[@CircleTFarms419]

Great video , thanks for sharing 👍🏻

[@robertironside3166]

Love this Mack and the Ford that you use to haul with 🙂Love to see some updates on the B Body Mack you're putting back on the road.

[@kirkduguay1675]

Fantastic content! Not missing an episode!

[@rodneyrote6261]

That ford 9000 is cool

[@jimmackey2909]

You two haul some serious old iron. I'd love to be part of that. Thanks for the content and the work putting it together.

[@justinmcclanahan6036]

Nice looking old grader,I bet Matt would love to have that one to go with the other 2 he has

[@DieselCreek]

Good video bud. When we going after that 41?? 😎

[@ScrappyIndustries]

Probably in a couple of weeks lol

[@garymessina1609]

Great job great video thanks Sam and Matt

[@markkiefer-q3l]

5:52 notice you own a Mack gold bulldog,man who did his homework!

[@markbehr88]

Appreciate you want the engine but the grader is worth saving.

[@ScrappyIndustries]

I’ll sell it to you minus the engine

[@markbehr88]

@@ScrappyIndustries If I lived there I would buy it but I’m in Australia.

[@SpeedSmith]

Add 'putting in a turn circle' to Matt's to-do list.

[@randyhale4181]

I love that Mack. My dad had the Mac Magnum cabover love that truck. Then he went and bought a Peterbilt😢

[@ScrappyIndustries]

Man a Magnum cabover is a sweet unit!

[@Spitter-ud8jd]

Matt makes a good [Mon Back]🍻

[@jeffheins6624]

It's good to have friends with useful junk to trade with

[@underdebus618]

Move a good tire from the left side to the right side, it should tow easier

[@nelsonmattoon150]

That V8 sounds great

[@williamjh]

I’m gonna have to make the 30 minute drive to the showgrounds a couple nights the week before the show I hear a lot of fun stories

[@corydriver7634]

That grader with the tree still stick out in front of the cab seemed appropriate.

[@douglascorley6630]

A scrappy the guy diesel Creek had a Bigfoot fan behind him in a couple of his episodes and nobody noticed it

[@dosman01302]

Isn't Matt's knuckle buster grader a 4 cylinder. Didn't know that one was a 6! Does sound good!

[@ScrappyIndustries]

Right this is a No 12. Matts is a 212 which is 2 sizes smaller. It’s a pretty big difference overall lol

[@dosman01302]

@@ScrappyIndustries okay that makes sence. Thanks Sam. I just watched your combine rescue. What a mess that was! Is it back to operational?

[@ScrappyIndustries]

@@dosman01302 yes it is! My cousin and uncle did a great job she’s ready to go for this fall. I think I’m gonna try to make a follow up video on it

[@1202_is_your_Fren]

Does it have oil? You don't need to worry about it not having oil ...

[@Navila1]

Can you make a video of the backhoe???

[@irench]

Come with me and you'll be,,, in a WORLD of OSHA violations. From the binder to Matt walking down moving tires and standing one foot on each machine. LOL Too bad about them Llantas some decent rubber to trade they would have been.

[@mischef18]

Make great garden art if it's not worth fixing bro. Great video by the way. Safe travels. Ken.

[@73DiamondReo]

Thats the way the permit said to go bud

[@ScrappyIndustries]

Only option I had really lol

[@EricPirrone]

That make sounds mean boy with that e9 v8

[@johnnyhunter4345]

How is Mack quality now compared to the old owners?

[@ScrappyIndustries]

I don’t know much about the new stuff- when I was in their engine plant back in 2015 I heard Volvo had put way more money into making it nice than before

[@Thefunnyfarm78]

oh i seen a ltl 9000 awsome

[@alex_medvet]

🤗😎😎🤘🤘

[@DanielGouldingnavy]

Fairly new to your channel Sam. A question about your superliner. Does everything behind the grill match what's sitting on top? A Mack guy will know the meaning of that one.

[@ScrappyIndustries]

Yes sir she’s all Mack

[@gullreefclub]

At a shop I used to work at we phrased the question as “does everything on that puppy dog match from the grill to the mud flaps?” Or is that puppy dog a pure bread?

[@gator83261]

Cool.

[@hvy1ton]

Other than the radiator, the 12 doesn't look any rougher than Matt's 212.

[@DieselCreek]

It is actually, my cab is solid his is real rough

[@hvy1ton]

That makes me feel better.

[@gregoryhart3307]

What crane is that in your yard? Is that 30B?

[@ScrappyIndustries]

Good eye! Yes it is. Needs a bit of love but it runs about once a year

[@SteamCrane]

13:50 - The usual suspects!

[@quietbrianquiet]

👍

[@Frank-bh3cm]

By the way, it's Matt's b-day on the 29th Aug...

[@dans_Learning_Curve]

Tires look pretty good on that grader! Sure you wanna part it out? *EDIT* I guess they're a bit beat up..

[@ronnieperdue2977]

Love working around heavy equipment you have no what ur diong it's very dangerous work my neighbor use to help him in scrap yard we where loading a car whit his home made boom truck the broke if one in the way would have got flat like a pancake he always wanted to be cheap and rig up stuff he made plenty of bread he would do some shady stuff to his and workers Detroit police got his ass one day and the irs he got back on his feet again 😮

[@TrainboyRR]

I like the video

[@kennethcarr2511]

Ask Matt where is the AutoCar?

[@alkennedy1124]

I need a wheel,,, 10 x24 inch it’s for my 4 cylinder cat grader pony motor is with out parts carb,,and piping,im😮not sure thanks BigAl California

[@ScrappyIndustries]

We can probably make that happen!

[@downrightme6811]

Why do some people bash other people’s equipment? Does it mean they are jealous?

[@jodydavis161]

So why does Matt only do one video a week if that ?

[@dans_Learning_Curve]

Quality videos take time! Matt has earned every sub he has! I've been watching for several years now.

[@DieselCreek]

Dans right… I work as fast as I can but I’m only one guy, some videos take weeks or months to achieve

[@williammccartney4833]

Was that the Mr George that Miguel keeps calling and telling on the new guys lies?

[@ScrappyIndustries]

I think he is actually the new guy 😂

[@Vic-td7hp]

Tow start in third, not first.

[@BWYinYang]

Grader a series content video

[@dannygoin6552]

🇺🇸🇺🇸🇺🇸☕️☕️☕️🥃🥃🥃👀👀👀🍻🍻🍻👍👍👍🇺🇸🇺🇸🇺🇸

[@glennmoreland6457]

Good ☹🇬🇧

[@nelsonmattoon150]

You think he would

[@gregoryreimers9188]

Make Matt work, geez

[@johnglasscock-mk6ep]

Bro

[@richb1128]

You should back the brakes off by a half turn turn, not 2 flats. That is too tight.

[@ScrappyIndustries]

They’ll wear in lol