Having Some Fun With Propellers Upgraded Proboat Sonicwake V2 - Rc Boat

Having Some Fun With Propellers Upgraded Sonicwake V2 - Ose 150, Oxidean 4814
SONICWAKE V2
://www.avantlink.com/click.php?tt=cl&merchant_id=953aec29-878e-4306-b620-2df85883455e&website_id=70256520-69d3-496b-a06d-cfbf9af7a81d&url=https%3A%2F%2Fwww.horizonhobby.com%2Fhttps%3A%2F%2Fwww.horizonhobby.com%2Fproduct%2Fsonicwake-v2-36-self-righting-brushless-deep-v-rtr-black%2FPRB08032V2T1.html
OSE CHOPPER PROP
48mm
www.offshoreel...
42mm
www.offshoreel...
Rc Boat Prop Testing is something I enjoy doing on and off camera, I've always wondered what 2 props would do if run on the same shaft? ENJOY!
Thanks for watching ironclad rc tinker test and tune everything
Personal contact information [e-mail]

[@IRONCLADRC]

Check out these new 1:1 sharrow propeller design kzbin.info/www/bejne/eGm5np99p9F2jbs kzbin.info/www/bejne/jmjTe6R8nN-LppY

[@RCplamodel]

*Thank you for the great boat and video! 👍👍🚙🚙😎😁*

[@PatriotBrad]

they are lined up ready to watch. They know what big B is about!

[@55steviegreene]

Interesting video running dual props in different positions. great video always keeping things intresting

[@IRONCLADRC]

Thanks, yea "something out the box."

[@mccaffery3608]

this is the definition of a man having fun

[@SteveLane61]

That was so, so interesting Big B! This is the kind of stuff we'd all love to try out but most of us don't get chance. So thanks for sharing this 'experiment' with the props. Definitely given me some things to try out. 👍👌👊

[@IRONCLADRC]

It was a fun test playing around, I may revisit the twin 1.6 p prop later. I want to try a small prop forward and a big prop in the back I can't believe I didn't think about it while at the pond. Lol

[@SteveLane61]

@@IRONCLADRC You were trying so many different things bro, you can't do it all in one session! 😆👍

[@nealstarling5422]

This is why I tune in to Ironclad every day! Definitely an audible difference with the stacked four blades. It would be interesting to see the difference between 2blade props and actual 4blade props of the same pitch and dia. (Speed and temps) Keep up the experiments, that was cool Big B. Thanks

[@IRONCLADRC]

I agree it's actually hard to find a 4 blade 3/16 bore prop. If you ever run across a 44mm 1.4p 4blade let me know cause I'd definitely pick one up and do a test. Thanks for watching

[@elvispresley2328]

thats a good running boat brother,i allways have a shit ton of geese at my pond,and most of the time they wont get out of the way,so ill take my drone up and that usually does it lol

[@henrikmpunkt]

yeah man thats so cool with two props. love to watch those vidz,

[@georgegonzalez9281]

Now I know where the old saying "line 'em up like ducks in a row" comes from. Those are some respectful geese! A couple of them got curious and wanted a closer look, but mom quickly got them back in line. I think she told them - "careful now, remember how your uncle got taken out" :) Boat Gang

[@Mr.Blackhatt]

Man! You got a lot of props there! 😋

[@Joe_Gervasio]

Fun video I was definitely missing the V2.

[@Dr_Jet]

Good fun my friend. Here's a thought to drive you crazy over the next few months: Counter-rotating props........ 🤔

[@IRONCLADRC]

Like the ole Volvo pennta 1:1 lower unit! That would be awesome 👌 www.google.com/search?q=volvo+penta+lower+unit&client=ms-android-samsung-gs-rev1&prmd=sivn&sxsrf=ALiCzsaFQ0OZTlqegM6_kuMaJ6SSev3C3w:1659027417002&source=lnms&tbm=isch&sa=X&ved=2ahUKEwi2pvPehpz5AhUcg2oFHSrYDj8Q_AUoAnoECAIQAg&biw=412&bih=783&dpr=2.63#imgrc=JwhvDaAZIp3LgM.

[@Dr_Jet]

@@IRONCLADRC Exactly! When will see the IRONCLAD version???

[@remkojerphanion4686]

Another thought: Seriously, you might be actually on to something with your dual prop experiment. Who knows, maybe a whole new prop design. Most of the guys that visit this channel are probably familiar with Thai long-boat props - they're outta this world, and the speeds they reach with such small engines is amazing. I reckon the Thai long-boat racers just kept experimenting until they came up with a prop that works.

[@IRONCLADRC]

I wish I could aquire a thi long tail prop. I think there extremely cool looking and would be very interested in seeing the performance on a hydroplane, rigger or cat. I enjoy watching the rc and 1:1 thi long tail boats zip around on youtube

[@remkojerphanion4686]

@@IRONCLADRC I think the RC boat guys in Thailand make their own props. I don't know how though.

[@IRONCLADRC]

@@remkojerphanion4686 I believe your right every one is custom built?

[@remkojerphanion4686]

@@IRONCLADRC Yes, that is the case (at least from what I've seen on YT)

[@Juderocks0]

You should put the crash with the blackjack boat in the intro.

[@rodneyrasmussen1199]

Got me a big block for the V1, now for an ESC all from OSE, LOVE THE VIDEOS BIG B

[@IRONCLADRC]

You'll love it

[@remkojerphanion4686]

Really cool that you've returned to the twin prop experiment! I'm amazed that the second prop stayed in position without a spring washer or loctite! Would you say that with dual props, you've got more traction (better holeshot / more acceleration), but less top speed due to increased friction?

[@IRONCLADRC]

Yes much better low end take off, then it kinda bottoms out on topend speed. I think it's because of the amount of blade surface area in the water not allowing the motor to top out in Rpm? It was actually a fun little experiment

[@noelstadelmann2219]

short question? how is it exactly with Pro Boat, do the boats already have grease on the flex shaft when you buy it new or do you still have to do it yourself, so at the beginning before I ride it for the first time? I love your videos keep it up!

[@IRONCLADRC]

Usually proboat boats come GREASE from the factory. It's a good practice to GREASE your boat before each run (every run) that being said you should be able to run your new boat right out the box.. personally I go through my new boats pre run and check grub screws nuts collet grease etc..

[@noelstadelmann2219]

@@IRONCLADRC Ok thank you for your answer

[@frederickgrassie3383]

I love that V2. I do have two questions- #1. Will the stock flex shaft with the tfl stinger, I am installing my tfl today. #2. Did you put a spacer between the rudder L bracket and the transom, so prop doesn't hit in a left turn? I'll install the ose raider 150A, next week. Thank you

[@IRONCLADRC]

Yes to the tfl stinger stock cable. ( barrel has to be full screwed in to its shortest possible position) 2 yes I have a litte spacer between the rudder L and the blade bracket

[@frederickgrassie3383]

@@IRONCLADRC thank you. I kinda wish I had left this alone.i gave up. Cut tube to short. Back to stock.

[@roadstar499]

i have a GRUB screw question... do you know the size of the small grubs they use in the 3mm couplers,and drive dogs for the 14-20 inch boats??? I have a set of easy outs on the way to remove some cheap ass grub screws... i hope to find some that are iron clad and come with a good allen wrench to avoid anymore issues.... thanks

[@IRONCLADRC]

Have you tried 3mm that's a comon size

[@roadstar499]

@@IRONCLADRC is 3mm the smallest grub size used on those 17'' boats with the 22-12 high kv outrunners? because these are the smallest ones they are used on that new boat i just got.so if you say they are 3mm i will take your word for it. i think the 22-12 motor has a 2mm or 3mm shaft and the flex cable is quite a bit smaller... i need to buy a digital guage i guess...

[@IRONCLADRC]

Don't take my word for it, try a 3mm screw before you make the order

[@roadstar499]

@@IRONCLADRC i found a bunch i had... again i don't have a mic to measure...so not sure if they are m3 or smaller...very common in all drive dogs and 3.17 cables from my old boats...even in this new deerc 14'' inch boat but they are stripped..thanks Update !i found a bag of 3mm regular screws these grubs are smaller either 2mm or 2.5mm i ordered a dig micrometer... thanks

[@raymondkelly4065]

What would give you better speed with the mg36 a 4819 prop or 4319

[@Heisenberg-b7o]

Hey I have the impulse 32 and what are the best batteries to use for that boat cause right now I’m using 3s 5000

[@roadstar499]

i have a prop question lets say you have two props same pitch, same size blades and same diameter...but one has a two blade and the others a 3 blade...performance wise what should be the difference??? esc and motor are iron clad and can spin them both at max rpm... all i am pretty sure of is the 3 blade will move more water if power is the same...thank Big B. :)

[@IRONCLADRC]

Imo 3 blade has better take off than the same size & pitch 2 blade

[@roadstar499]

@@IRONCLADRC and being same dia/pitch and design it will have same top end but better acceleration ,but also draw more amps? correct? thanks ..i will be setting up several boats within a week or so...

[@jonathandemaria1865]

Why do you shape some of your props with the flat spot on the tip

[@IRONCLADRC]

They came from octura like that. With flat tips

[@bigboyrc25]

Awesome brother! Where did you get that 448 prop from? Is the 448 still better top speed than the 4519?

[@IRONCLADRC]

Oxidean Marine 4814. The 4814 is a big prop for the v2 definitely can't run that prop with stock electronics. 4519 has a better top I think and handles much better

[@robertpawlusiak]

My Impulse 32'' 6s turns quickly when Accelerating stock prop whats wrong ?

[@robertpawlusiak]

Looking to go faster what prop do you Suggest ?

[@IRONCLADRC]

I've never run the impulse, I hate to steer you in the wrong direction. (Pun intended)

[@daltonboucher8162]

Thumb 👍 bud

[@hoodatdare7039]

NEED TWO MOTORS TO GO WITH THE TWO PROPS

[@jonb2613]

Why don't anyone of you people reviewing this boat and others mention run times or specfic batteries and required connectors? It isn't always just about speed.

[@IRONCLADRC]

I've got plenty videos about run time and battery options for this boat. I like to run a minimum of 6000mah 100c in the v2. Maximum 6s 9500 90c 6s pack with the stock electronics. If you run single 6s pack you'll need a ec5/ic5 jumper.

[@jonb2613]

I appreciate your fast response.I would just like to see honest "out of the box" results including battery temps after a run, another thing I haven't seen. Of course various conditions affect results to a degree. I have watched many of your videos and appreciate your time and effort.

[@IRONCLADRC]

Here's 3 videos I did with the boat basically when the boat was stock. All kinds of info in these videos also check the v2 Playlist every video I've done with the v2 is in it. If your only interested in the stock v2 look at to older videos at the bottom of play list Owners 2 week review kzbin.info/www/bejne/maSZinutm6lnoM0 Battery test about 4min in to the video kzbin.info/www/bejne/mpiaYaiAeKqegJY Running the boat with 5000 100c spektrum kzbin.info/www/bejne/l17bfXSgbZmipNU

[@easternrc1924]

Stop promoting oxijunk, all his gear is predominantly rebranded Chinese products and the company treats customers like shit. I enjoy your tinkering, but I personally do not tune in to anything Oxi related. Try an RC Boat Bitz 48mm prop they have for the Sonicwake, I think you'll really enjoy how the boat performs, especially with your esc and cooling upgrades. Please mate, don't support a company who only damages the hobby and is just in it for money.

[@Buellerwtfman]

He didnt promote anything, just said what it was. I get people have issues with the guy, but no need to drag the drama everywhere. Dude is just having fun and trying to entertain some people, Im sure he dont want or need to get in the middle of that mess.

[@easternrc1924]

@@Buellerwtfman mate I know where you're coming from, and I can see how my comment may have been interpreted as referring to this particular video but I was actually referring to a few previous vids published. After my experiences with that douche, I can't be negative enough about that company.

[@Buellerwtfman]

@@easternrc1924 I understand and have seen all the stuff. I know you are just trying to look out but lets just play with some boats and have some fun!

[@IRONCLADRC]

Pretty sure every human on this planet is after the almighty DOLLAR. I'm not gonna stop running oxiden products just because he rebrands another product, just about EVERY rc boat/car supplier on the market rebrands products, its just the way it is. RCBB is located in Australia I'm in the US. If RCBB sends packages to the US in 1/2 working days then yea I'd consider buying from rcbb but they don't usually 1 to 2 weeks shipping if that. I hate that you feel that way but I'm not gonna stop running Some of my favorite props just because 1 person doesn't like it.