HCW-M203 or XH-M203 water level controller. Setup and demonstration

[@viktoriaschlegel3613]

Hi Dean Thanks you for the simple Video . It helpt my very much .

[@robertmanuel5273]

Do you have any idea how long the sensor wires can be? Is 6-8 ft practica?

[@hoqp]

Hi great tutorial. Just want to ask how did you reverse the action by default it supposed to collect water when the low lever sensor detects no water. Im trying to replicate you showed on the video but no success already interchange the sensors but no success either

[@shreyasshetty9869]

He has reversed the float sensor connection as well as the float switch itself

[@shreyasshetty9869]

He has just physically reversed the float switch itself. Nothing to do with the wiring. I just tried it as well, got it working.

[@dazegd3159]

Hi Dean! Thank you for a simple and concise video! I'm trying to use this setup to refill an overhead tank from an on ground tank. I have 2 questions. 1) Will this switch the pump on by default in case the power comes back after a power failure? 2) usually after the pump stops, there's some amount of water that comes back through the pipe as siphon, will that lead to the system being turned on again?

[@deansatchell5481]

1) After the power failure, provided the water level has activated the high level switch, the pump will switch on. 2) Make sure the quantity of water coming back down the pipe is not sufficient to activate the high water level switch. A wider container will mean a lower water level rise for a given quantity of water.

[@naqeeb16]

I don’t think both an electronic automatic switch and a float valve are necessary simultaneously. The motor can be controlled using only a float switch. I’ve implemented this for my overhead water tank, but for underground water or septic tanks, the setup can be easily reversed.

[@harigopaldas108]

Hi can you please share details for the float switch. Is it easily available in stores or online? Will this kzbin.infofPEz77MIPfA?si=hLvNR8dD7RNCs7gr work? Thank you

[@naqeeb16]

@@harigopaldas108 Yes, the one you shared is the best option. It's cheaper and more durable than the electronic one. I'm sorry that I haven't made any video yet of the one I made.

[@capungimut5392]

Can i use for output is pump AC 220 volt ???

[@wagnerx7reais]

🏁 Por Favor -É Possivel usar nessa placa o Sensor de Nível de Líquidos Sem Contato XKC-Y25-V Voce conhece algum projeto para meu objetivo ??