How to make Water Pump Automatic Switch ON-OFF Circuit | Water Level Controller with 555

[@TechStudyCell]

Watch [NEW] video on Fully Automatic Pump controller: kzbin.info/www/bejne/mJikg6SlqLBqipY

[@herbertstolz1097]

If you swap the depth of the Red and Green wire in the Tank, you can change the pump to be a bulge pump for boats but put the pump in the tank. Once the water fills the boat and water reaches the green wire which is your safe maximum level of water, then you will trigger the circuit which will keep pumping till the water falls below the red wire and will turn the circuit off. As water fills in again, and reaches tge red, nothing will happen. But when the water reaches the Green wire, you will trigger the circuit and tge pump will run pumping the water out till it drops below the Red and Green wires. Give it a go.

[@A-ZEE.]

YOU DID THIS PRACTICALLY, I MEAN IT WILL WORK 100% SAME HAS YOU DISCrIBE

[@rohanparashar8232]

It won't work that way. As soon as the green wire looses contact with water, the pump will start. We'd need circuit modifications to achieve a bulge pump function.

[@tomk1s]

@@rohanparashar8232 yep thats true, but i can not find the tutorial for bulge pump function. :/

[@adnansikandar2332]

The common, pump ON and Pump off wires will get oxidation after some time due to electrolysis process.

[@chanrashekharmirajkar1097]

Use float magnetic sensor.

[@raveendranc285]

You have a great quality of helping others, keep it up. Thank you man.

[@msh1830]

kzbin.info/www/bejne/l5Cll6hnjbx6o6s watch last 30 second of my video. i explained state table and state diagram

[@karanmadavi732]

Pls do not connect 220v AC current if u are using 5v pump. I tried this and my 2 pumps are blasted. So i connect 9v battery supply instead of 220v and guess what! It works 👍.

[@diplomatic7137]

So if I want to use it with a 220v power supply, can I use it with a 220v pump?

[@fardinhasan1543]

do i need the dc jack for 12 volt dc supplybif i use 9 volt battery

[@PerchEagle]

I learned the difference between TRIG and THR, thanks :)

[@homoudalyahya4618]

Great video, very clear demonstration, and above all sharing the PCB diagram. Thank you so much.

[@TechStudyCell]

Glad it was helpful!

[@homoudalyahya4618]

@@TechStudyCell I am trying to replace the pump with a solinoid valve. I have just completed the collection of needed items, but unfortunately I got 1.2k resistors instead of the 1k. I wonder if that is okay and if the circuit will work with the solinoid valve. You help in answering my questions will be highly appreciated.

[@bappaelectric305]

Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@sitaramkolte6403]

@@TechStudyCell it is circuit for motor upto 1hp or not

[@msh1830]

kzbin.info/www/bejne/l5Cll6hnjbx6o6s

[@bhavyadoshi4111]

Please let me know that the power supply wire is directly be plugged in the swich board or you use the battery

[@bhavyadoshi4111]

Please reply me urgently i have to show this tomorrow in the school

[@turiyathe4th]

That pcb is a thing of beauty

[@SanjayKumar-mz3wx]

बहुत सरलता से समझाया आपने, धन्यवाद |

[@zicuh]

Brub i got 6th place for this participating in state electronics work experience fair 🎉😊

[@vasantakolkar3397]

As you are using DC current in the probe immersed in the water, it will start electrolysis and corrode the probe material ( even S. S.) and the wire connected to it. Use ac voltage for the probe. Needs a better ckt. Good work. Instead of using + ve for common probe, better use ground.

[@shant-o]

I was looking for this comment... Apparently nobody else said anything about it 🙄 I've changed the wire twice in 1 week 😂 still corrosion is going on

[@krisp3629]

We just need it for a science project for a day, will it corrode?

[@vasantakolkar3397]

@@krisp3629 no problem if used for on day.

[@vasantakolkar3397]

@@krisp3629 no problem if used for one day.

[@krisp3629]

@@vasantakolkar3397 thank you so much. Another question, will the circuit not work if I use a different capacitor and resistors?

[@achayanfromkottayam5559]

I like ur plastic and papers pcb idea👍👍👍

[@johnvictor3887]

Pl cell No

[@TechStudyCell]

thanks

[@dwiindri3491]

Terimakasih telah membuat rangkaian on of water pimp saya akan mencoba membuat untuk tandon air 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@vijaypaluskar879]

Thank you for such a nice home remedy "do it your self tech project" .Your presentation is very good. I want to add one observation to this effort. Generally you will find that water is pumped from ground floor water tank to the overhead water tank. The gadget you have explained will serve good purpose for overhead water tank. However a person need s to ensure that there is sufficient water level in the ground water tank. If that is not ensured the pump may have a dry run for a long time till the ground water tank gets filled with the water. This is a dangerous situation since motor may burn. Plz consider to add another water level sensor for the ground floor water tank. The pump should operate only if there is sufficient water level in the ground tank. Secondly if the electricity suddenly goes when the pump is running the pump switch must become off automatically inspite of the water level sensors giving signal to start the pump switch. Else when the electricity resumes pump may suddenly become ON again. Thirdly there should be an isolation switch for this automatic level controller unit, This will be needed when there is leakage of water in the water circuit and needing a repair . This will be leading to hunting of the pump On/OFF condition till repair is done and may not get noticed easily.

[@TechStudyCell]

Thank you for your detailed feedback. Will do the changes in upcoming projects.

[@bappaelectric305]

Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@eddiemolina657]

May I suggest, you could put a drain pipe with a height of 35cm above the bottom of the tub. Then you may attach to the drain pipe a N/O mini gas solenoid valve to it & then on of its lead wires is the same attachment to your water pump. So if the water pump is turned on, simultaneously the solenoid valve shuts off not letting water out & as the water pump turned off the solenoid valve opens & releases water onto the reservoir bellow & the cycle repeats as the controller dectects that the water in the tank is low. I hope it works.👊😁

[@msh1830]

kzbin.info/www/bejne/l5Cll6hnjbx6o6s watch last 30 second of my video. i explained state table and state diagram

[@himanshuchaudhary1857]

What changes i have to do to o use it for AC submersible pump?

[@indranagendra2157]

I think ,We can go through relay 👍

[@prakashraje9051]

Thanks boss. Muze nahi lagta isase behatar koi technic hoga banane ka. Kam like dekhkar dukh hota hai. Koi bat nahi.👍

[@TechStudyCell]

Welcome

[@mohamedferoz2721]

Very helpful video but can't able to download the PCB DIAGRAM any advice

[@shvideo1]

How so creative and neat. Great job my friend! Thank you for sharing.

[@TechStudyCell]

Thanks so much 😊

[@jsgallery194]

Is it possible for AC supply with the same diagram. If yes, then is there any possibilities for leakage if electric current in the water tank?

[@anandjoshi8554]

a big no

[@philipjeyaraj3496]

Is it safe to use 220v power supply, can i use 12 v and does it necessary to use both 12v and 220 v input, pls reply bro

[@MohdAzam-jn6qo]

Yes. In this circuit you must have two types of supply 12v for circuit supply and other depands your pump specification( description on relay)

[@bappaelectric305]

Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@akandoraju2260]

ড্রইং এর মাধ্যমে অনেক সুন্দরভাবে করলেন

[@TechStudyCell]

Thanks

[@MohammedAhmed-gn9vc]

I made a circuit exactly as per your instruction High level cut off ok But auto motor on after reaching mid position not working Please help me

[@TechStudyCell]

Please check for any loose connections.

[@liamstone3437]

This looks like a useful circuit to keep a tank topped off but how about a circuit that pumps water out and shuts off when it reaches a certain level? I would use such a circuit for a 12V 20A bilge pump. I would love to see your version and when I make my bilge system I could link to your tutorial in my own video.

[@azamchishty6129]

Did you make one?

[@liamstone3437]

@@azamchishty6129 not yet. Still working on it

[@arumkumarbhattacharya7773]

I'm a hobbyist, and this video attracts me. Now I want to make this project. Where I can get all the components (without the 230v pump) in on one package, can you help?

[@doobuu2999]

I bought bc548 instead of 547 and dont have enough time to change it. Can you suggest any alternatives to make it work?

[@TechStudyCell]

You can use BC548

[@karunakaranrajakannu3346]

This will use only for user Store tank what about main Storage tank and also dry run pump protector we need it

[@anandjoshi8554]

use a nc float switch at under ground water tank ...connected in between power supply to the circuit.

[@kunalkahane9442]

I want reverse function . When tank will full, I want start pump & when tank is in low level, I want stop pump . What can I do chenges in circuit .

[@TechStudyCell]

Just place the red wire in middle and green wire on the top. In this circuit the pump will start when the water level touch the green wire and stop when water touch the red wire

[@kunalkahane9442]

@@TechStudyCell bro I chenge on off wire from 555 ic but still function not working reverse ....think deeply and tell me exact solution ...I I'm not e&tc engg ...I m mechanical engg

[@wasiljaved4600]

Sir good job, i have question that the supply in for pump is for what purpose if you have already given the supply to the pump?

[@sathyamurthyponniah124]

@wasil Javed please note that only the neutral is connected to the pump. The phase will be connected after the relay switches ON ! If you wish , you could employ a Double Pole Solenoid/Relay instead of the single pole solenoid.

[@yogeshlekhadia7742]

Thank you for your answer. 30Amp Relay se single phase capacitor start monoblock 1Hp 7Amp ki Do (2) motor Ek saath chala sakte hai? Aur circuit ko auto aur manually kar ne ke liye switch kai se lagae?

[@prasannaprasanna6521]

Bro pcb leyout not download plz help me

[@amrittimilsina7099]

Can we use 220v motor here ?

[@TechStudyCell]

Yes. But use the relay as per the current rating of the motor.

[@amrittimilsina7099]

@@TechStudyCell I have 1 Hp motor , which relay I should use please reply

[@Kenjiro25]

Hi, thanks for sharing, justa doubt; this project works with 110-120v too?

[@TechStudyCell]

Please check out latest video on this kzbin.info/www/bejne/mJikg6SlqLBqipY

[@SatriaAjiPutraMaxt]

Great tutorial, can I change the relay to 5VDC and power source to? Thanks

[@TechStudyCell]

Yes you can!

[@bappaelectric305]

Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@rangka-ESAF]

Thank you, I'm using your design as a basis for my home water well pump on/off control and it works perfectly.

[@TechStudyCell]

Great to hear!

[@kshitijsonar4294]

Can I real use this for ac motor ?

[@rangka-ESAF]

@@kshitijsonar4294 yes, im using this for 200 watt ac pump, so far no trouble. But first please select suitable relay for your pump.

[@kshitijsonar4294]

Which relay will be the best for common water pump

[@rangka-ESAF]

@@kshitijsonar4294I'm really not an expert in this, im using cheap 5v relay, as long as it fits the pump rating. But to be safe, you can ask your local electronic store.

[@TheZincalloy]

Could this be made to work to drain water out when it is full. and stop whe the tub is empty

[@repaircityhub737]

how can I add a circuit that will send a live feed back of the water level to my phone

[@TechStudyCell]

Will make video on it.

[@repaircityhub737]

@@TechStudyCell nice

[@subhodipghosh2326]

It is working on ac 220v pump????

[@TechStudyCell]

Yes

[@shija1999]

Hi..Why cant we incorporate a 12v supply on the board itself instead of giving a separate power supply point for the 12v. The circuit diagram should be modified for only 220v input with required components on board for automatic voltage reduction wherever required.

[@FSEC-ds6cq]

You are use 5v Motor so what is input voltage supply there is 220v or other

[@jamesmyrthong6112]

Superb video And also the background music. Thank You tech study cell.

[@TechStudyCell]

Welcome

[@bappaelectric305]

Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@rajibkarmakar5764]

12V DC supply will be for both Pump and Circuit or only for the circuit?

[@mentesanayamor]

What type of engine do you use in this video to fill the water container?

[@shekarv8738]

Hi dear, I like it today. I ll assemble tomorrow.

[@AnandaRajaT]

Whether it has worked

[@A.S.khojaryavrat]

सुन्दर है भाई साहब जी सर्किट

[@FSEC-ds6cq]

It's really for 220v supply and motor also

[@TechStudyCell]

Yes. Please check the circuit and watch complete video

[@FSEC-ds6cq]

Thank you very much for this video and your won reply thank you very much 🙏

[@dishantkashyaprock]

Can you tell me any idea Motor turn off when water full But motor should only run on specific time like from 6 to 7 am and when tank full it auto off

[@ahmadsubhi3293]

How to add water pump dry protection when water tank source is empty,help me sir

[@ANKIT.MISHRAA]

Can u please tell how are you supplying 12V dc to the components...and how much ampere ?? Should I make a rectifier of 12V but how much ampere required?? 12-0-12 transformer but ampere rating....???

[@anandjoshi8554]

someone says use a 5 volt adaptor for the circuit...have u completed the circuit yet ?

[@halfbeardsilvertongue5129]

If I reversed the middle wire and the top wire, would I get something that would pump it down when full?

[@TechStudyCell]

Soon I will publish video on water pump switch with overhead and underground tank automation

[@bappaelectric305]

@@TechStudyCell Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@eshwari-sc5nk]

Sir I try super working

[@TechStudyCell]

great..

[@denzelkpeli2973]

Please if i want to add a buzzer where should i put it in your circuit and also I’m hoping it sounds for some seconds

[@sameeraenterprises2043]

I also made it and it works well, but there is a small problem, the motor only works for about 10 seconds and then turns off. It happens several times a day. The three level wires are about 25 meters.

[@msh1830]

kzbin.info/www/bejne/l5Cll6hnjbx6o6s watch last 30 second of my video. i explained withstate table and state diagram

[@AynaeChitral]

Nice idea pr bc547 tranister kay jagy me konsa tranister use karsakta hun?????

[@neerajkumarchandra9877]

Thank you sir for providing knowledge , but i m facing issue with this circuit whenever i do on this circuit my 555 Timer IC got burnt . i copied all component and circuit diagram exactly same as you provided us but it is not working. pls suggest me what to do....

[@devanesh5791]

do u finished it??

[@shahzadsadiq126]

Is the same reply 250VAC 7A, will work on my 880 WATT [220V 4A]

[@vishwaa2600]

Can we use for 3 phase motor?

[@veeem3964]

Very nice design circuit, tried it and it works fine like in your video The only problem is the common probe (sensor) starts getting corroded over night , if the sensors in some way is AC volts this electrolysis won’t happen, please design Thanks for the video

[@youknowme6780]

Great work around, how about auto on/off switch for exhaust fan after every 30 min circuit with 220V for fan? any suggestions

[@GOPALJHAlife]

use nodemcu+relay and flash with sincric pro control or set routine on google assistant on your phone for the way you want for free.

[@GOPALJHAlife]

alternatively use 555+relay and set it for half hour astable multivibrator output controllong relay

[@avdheshmishra6301]

Thanks, very helpfully

[@TechStudyCell]

You're welcome!

[@victo_origin]

Bro mera circuit chal gya ha lekin band nhi ho rha chala ja rha ha motor me kya jaru

[@Allah_reham]

Thank you for sharing this video. I have some questions. Will it work for 2 phase supply? Can I directly implement in my home water tank? Will it work with these components or do I have to change the values for each component? @TechStudycell

[@deepakkhaithan3402]

Did it work

[@kuro758]

the only thing interacting with the supply & pump is the relay. as long as your relay is rated for mains, it will work. use 5v adaptor for the circuit & use mains for the supply & pump connectors

[@anandjoshi8554]

@@kuro758 will 12 v adaptor damage the circuit/ic ?

[@kuro758]

@@anandjoshi8554 this circuit is designed for 12v so there shouldn't be any problem.. 555 timer works fine with 12v

[@chrischristodoulou1731]

Does the position of reference electon in the water matter?

[@guneetsingh7750]

i have a question, how can i make a circuit that automatically turns a 18w water pump on and off for 15 minutes every hour ,24x7?

[@abufahad.a6611]

Can we use this procedure for ac motors?

[@pradippaul2186]

Is circuit me 230 v AC pump use kar sakhte he kya

[@maksudrakib9959]

Supply for the pump is used in AC or DC? Can it possible by 9v battery and 5v relay?

[@rkverma3839]

Same question❤

[@ramkumarsoni7334]

In the circuit digramme Ic555 pin 7 not conected any parts but pcb intout its conecting to R7. Pl. Correct pint out.

[@raducracu]

How can I empty the tank Max-start pump, min-stop?

[@theundercovereconomist5678]

I also want to know this

[@nasreens592]

I was trying to print the pcb layout but that is not printed correctly.can you help me.

[@tristanmcmillan2007]

How do you reverse it so it takes water out the tank till its empty then refill and empty again.

[@revathielam8130]

Your teach very ease,thanks you,

[@TechStudyCell]

Welcome

[@Akashcreative]

Bro isma ac motor laga sakta hai

[@abulbasher854]

How many distance it will work.?plz tell me

[@Mihkyyy]

what is the yellow thing at 3:00?

[@TechStudyCell]

Just a wire.

[@deeppatel8198]

can I use a 12v DC motor? I have a DC Power supply only. May I have to change anything in the circuit?

[@TechStudyCell]

check the motor amps rating, accordingly change the relay.

[@deeppatel8198]

@@TechStudyCell anything else that I will have to change? Can I use DC for the power supply of the pump?

[@deeppatel8198]

I mean DC for both power supply?

[@chanrashekharmirajkar1097]

Yes

[@bluestack1123]

can be used on 2 Horse power Water Pump (i.e. 6 to 9 ampere)? any component need to be replaced else SPDT Relay ? and what Relay can be used to support maxximum of 9 amperes for 30 minutes until the water tank is filled as per the censor wire. Look to hear for experts.

[@error.1118]

From where should we get the pcb design

[@josedemiranda4445]

où peut-on imprimer le schéma électrique pour le controleur de pompe

[@abubakarshahzad133]

Ye aap ready pcb bhej sakty hain

[@vvijay2387]

is the supply 220v ac is this ok for 1hp pump

[@TechStudyCell]

Yes 220v. The current rating of relay should be greater than motor max rating.

[@whiterose720]

@@TechStudyCell bro which capacitor is used next to 555 ic the yellow one. Can U share.please......... I want the value of that yellow capacitor

[@nizamalakhil322]

@@whiterose720 it’s a wire

[@bsrihari554]

If we it on big water tanks we high voltage when it attempts to current shock

[@UbaidKhan-zt5bd]

Can we use house pump instead of this

[@technicalexperiment7084]

Kya hum isme ek water pump ke liye bypass nikal skte h

[@okgoogle9216]

If I am using 12v dc pump then anything I have to change in this circuit?

[@syedmohammadimran5151]

For this you have to continuesly pass 12 volt current through the water that has to be use for drinking purpose

[@EELEC19]

What is your supply is it 220VAC INPUT AND 12 DC OUTPUT?

[@simranmoraes3260]

It’s working very fine I liked but can you do other way around motor stays off and when reaches high it turns on and off when reaches low point please 🙏

[@chibunna_ea]

Does this work because water conduct electricity or what? And will this work on other liquids?

[@sdadapeersdadapeer1590]

Good job thanks

[@shivpujan314]

D C volt me hai kya

[@rocknorthstar3111]

Is there a simplified circuit diagram because I don't want to collect it on a board

[@sidtube12]

Great! I love this project. Thanks,

[@TechStudyCell]

Welcome

[@BalintNandori]

@@TechStudyCell can I also use this circuit for draining water? If I can i just have to use the normally closed "nc" pin of the relay?

[@bappaelectric305]

Bro 1 question answer please, isme components me 1k, 22 k, 180k,1m, sub 0.25w compalsary hai kya 1/4 w nhi chalega kya or, 2 question answer please, me isme 6v ka relay use kar raha hu ku problem tho nhi hoga na, resistance ka velue change kar na padega kya , capacitor ka bhi bolo,

[@JobertAguilar-x1p]

Where to buy this complete build

[@guruganapathy8900]

Suggest for auto cutoff if manually switched on motors since water scarsity may occur in next year

[@arslannaseer898]

Aoa, bro pf 104 is not available in market, please advice for alternative uf capacitor plz

[@abdurrahmansarker02]

Can i use this circuit as my home 1.5 Hp water pump? and will it work properly?

[@drewromero4688]

Why is there a need for 2 power sources and what voltage does each power source need to be?

[@ujjawalkumar2981]

Bhai ye 1 kg wat samersable pe bhi work karega kya

[@yasarme3386]

In this bucket what switch you used for water level Please reply

[@TechStudyCell]

In bucket we are sensing the water level. Here 555 Timer controlling the motor