He CLAIMS this is the best 25HP tractor on the market!!

[@mikerequa820]

I had a mahindra 1526 my cousin sells Branson now tym but 3 year's ago he talked me into tradin for 2515 i use a finish mower with loaded tires and my 2 granddaughters in bucket weighing 225 pounds total it would break traction mowing so it just didn't work for me. I just bought a kioti ck3520se shuttle shift so far it is doin great. Thanks for sharing

[@SteveJohnson-sn9gq]

I have the Branson 2515R. Just past the 3 year mark and 158 hours. I love the gears. I first thought I was sorry I didn’t get the hydrostatic but not for long. I am a retired Hydraulic Truck Crane Operator and so glad I decided on the R model. If there are multiple operators then hydrostatic is probably the way to go if you can put up with the noise. I think the shuttle shift and 12 gears is perfect. No issues yet and runs beautifully. Love my 2515R💪

[@tclodfelter8789]

I literally JUST watched Tony's video on his 2515 tilling his garden with the reverse tiller!

[@bikesbullets9080]

@Hank Hamilton Thank you for this video. I have been following you and Tony for well over a year. My wife and I bought a 2023 TYM 2515h for clearing our property. It is a beast in a small package!! You and Tony were a great influence on our decision to go with the TYM brand after looking at others. We do not regret our purchase in the least bit!!

[@hhamilton1970]

Thank you kindly

[@matthewdingman2177]

I have branson 4815ch. And I love it. It fits in every place I need it to, and has more than enough hp for what I am doing with it.

[@Daniel_Patin]

Two of my favorite KZbinr's, you guys make some good videos!!!!!!!! Ya'll are the reason I went with TYM tractor and I don't regret it!!!!!!!!!!!!!

[@hhamilton1970]

That is awesome! Thanks 👍

[@JeffGeorgalas]

I can absolutely see a lot of advantages for someone looking for a larger frame 25HP machine as long as PTO HP isn't needed. I'm glad Tony addressed the (potential) disappointment that people may have when buying this type of machine if they're thinking that they're going to run larger "PTO HP hungry" implements on the back. That's about the only disadvantage to this type of machine, but then not everybody needs PTO HP anyway. And for people that don't run 3pt implements that require PTO HP, this could be the perfect sized machine for them.

[@brucewayne857]

I really like my 2515H. I did have an issue with the tachometer quitting periodically on me. It took 3 visits to my dealer but they finally figured out it was a loose wire on the alternator. Who knew the tach runs off of the alternator.

[@tclodfelter8789]

We ALL do now!! Thanks! LOL

[@longhorn9841]

I went and looked at this tractor yesterday and after looking at all the other brands ,I am impressed. This thing is a beast.My only concern is the lack of dealerships in my area, and the ones that are out there are tiny mom and pop shops that haven't been there long.For me, it's between this and the Kubota 2502,but the 2502 is about 40000 more.

[@coombs06]

Love my 2515H TYM tractor. Got one in Feb 2024.

[@RobertBrothersJr-dc7nr]

Great walk around with You and Tony . It looks like a nice little tractor. Thanks for an enjoyable video Hank

[@stevemartinez6757]

That looks like a very nice tractor! I have a John Deere sub-compact 1025R which is 25 HP in a small frame. It has never lacked power for what it is. This TYM would actually be an upgrade with the larger frame.

[@nlynch55]

I have a Branson 2515h and I have been very happy with it.

[@gringopines3476]

IF TONY SAYS SO, IT'S GOT TO BE TRUE. HE'S THE MAN, THE MYTH, THE LEGEND. STAY COOL HANK. PEACE, FROM CREEL CHIHUAHUA, MEXICO...

[@hhamilton1970]

👍

[@andrewatkinson3700]

I enjoy both of your channels. Keep up the good information.

[@carltrano1325]

Yup Branson did a good job designing the 2515. Tym was smart enough to purchase Branson. Love my 4720

[@TonyReilly-mt7uu]

Great video. That is a great value tractor with outstanding capabilities.

[@user-il6qw7kp2l]

Never seen a TYM dealer anywhere near us, but several Kubota with their nationwide dealerships and support, not mention their super KTAC insurance that covers your tractor totally.

[@johnwhan7288]

Love that desiing. Wish john deere did this with there all in one backhoe loader. The lift on that sucker is great for a 25. What's not to like.

[@lynnshomestead7545Johnlynn]

Hank that's because it is .I was on it at his farm. If you look at its specs if can lift the same as a 45 hp.

[@hhamilton1970]

👍

[@tclodfelter8789]

Would this tractor handle a square baler, rake & cutter?

[@hhamilton1970]

I don't think so. If it could, it'd be all it wanted.

[@tclodfelter8789]

@@hhamilton1970 I knew there was no way it could handle a round baler..I have about 15 acres of hay. I was wondering about the square baler!?? Thanks!!

[@3rdgenfarm2023]

I run a 5.5 rossi sickle and a tar River 870 mini roll baler. I don’t know how it would handle a square baler.

[@ralphriddle8864]

Very nice job and God bless y'all

[@hhamilton1970]

Thank you

[@PeeksPeakHobbyHomestead]

Don’t tell anybody, but I have been thinking really hard about buying one of these…I need more lift capacity than my little BX. This seems like the most affordable way to lift 2k lb.

[@hhamilton1970]

Do it!!!! 😂

[@Buddha3.]

it. IS. nuff said.

[@TonysTractorAdventure]

Good times

[@hhamilton1970]

For sure

[@floridacoder]

By "detune" what does that mean in practice? How much extra horsepower can you get out of it and what would it cost in labor and parts? I assume that would void the warranty.

[@hhamilton1970]

Yes if you try to tune up the factory settings that would void your warranty

[@floridacoder]

@hhamilton1970 maybe buy an older model out of warranty anyways, then adjust the ECU. If there is no mechanical reason it can't support more HP and only a factory limitation in the ECU, sounds like a good way to get a higher HP model cheaper. What peaked my interest is that he said it's the exact engine as the 40HP+ model. So bumping up the HP seems safe. Unless there is something I am missing.

[@Whiskey61]

i've read there is a flat head screw behind a plate that you can crank up to get around 30 hp.

[@donaldstrishock3923]

You can "tune it up", by werken over the injection pump by "de-shiming" the injection cam plungers,governor springs,& timming....but it does NOT have the same camshaft of the bigger horsepower models; plus it voids the warrenty & is Not "Easy" to do.Maybe with a "Pyrometer" and lots of "know-how"/ maybe 32hp max!

[@frankwrogg2515]

So reminds me of the Bobcat 2025

[@PineyGroveHomestead]

Nope, we don't have that pesky freezing problem in the Sunshine State!

[@hhamilton1970]

True dat!

[@JoeTheFarmer]

Oh no; double trouble at it again!!! 😂

[@hhamilton1970]

Lol

[@Buddha3.]

forgot the second ‘s’

[@Gwalker0220]

I thought they had yanmar engines. Now they do correct?

[@hhamilton1970]

Certain models do yes.

[@Gwalker0220]

@hhamilton1970 I'm shopping now for a 25hp large frame... In my research it says it picks up 2300 pounds and is heavier than Mahindra or LS... Two main selling points for me.. Is that correct?

[@hhamilton1970]

sounds right. I've seena. 2515 pick up 2 round bales on the loader before.

[@mikeautry2271]

The kioti is the best tractor...I owned it.. best I ever owned....tym I bought..it was not as powerful as the kioti...hands down the kioti is the best...old man talking...

[@Gwalker0220]

I use to agree until I started seeing the repairs...

[@floydbraswell1105]

Just got 3515h

[@bobmakow55]

I almost bought that tractor at Larry Stovesand Tractor last year. It still had Branson decals. My biggest concern was TYM dropping it from their line since the already had a T25 and not supporting it.

[@hhamilton1970]

I think it's a good enough seller they'll keep it in the line up

[@oc6huki]

I would not stand under a loader bucket like that

[@noonerstrickland1743]

That is your BFF? I’m hurt.😢

[@hhamilton1970]

I only said that bc he paid me too..... you're my real bff

[@HeartofaHandyman]

😎👍

[@hhamilton1970]

👍

[@jimmyducote6318]

If you didn’t buy American shame on you