Head to head challenge Crosman 760’s new old and older, which will be the best?

[@mikeofmanymikes2630]

I have a 760 pumpmaster that I inherited from my old landlord. I thought it was just another cheap bb gun until I fired it. The thing is a beast.

[@joebauers3746]

I had one in the early 80's, with BB's it outshot every other gun in the neighborhood. I think it is smoothbore, so it did better than the higher end Daisy guns that had rifled barrels, which did better with pellets.

[@doubleemcastillano464]

They had one with a fiber optic front sight. All black with a pellet clip that held 5 pellets horizontally in the gap where the bbs feed into the chamber. That would fall between the last generation and the second gen you showed. That was my first Crosman Pumpmaster…around 2010-2012ish.

[@robbinparker4382]

Shout out to Jack Vadas, V.P. engineering/ chief of engineering. The original 760 designer. His son was 10 years old in 65, and was put into service for R&D. He shot 10 1500 count milk cartons a day until he had shot a million times! He still owns that original prototype. The 1966 price was 27.95. Adjusted for inflation would be over 220.00 today

[@AldoSchmedack]

Fascinating! I think I have put that many through 3 different 760's over the years. How I learned to shoot!

[@jasonlehman2090]

I had the 760 Commemorative. Christmas present in 1982. I was 9. Mine was all metal and wood. Very accurate for its day. Rifled barrel and a brass medallion in the stock.

[@WalnutandSteel]

That would be a great one to find!

[@powerplay4real174]

You had a gem 💎

[@powerplay4real174]

I believe the very early models before 1977 was rifled barreled and really accurate. 💥💥💥💥🔫💎

[@barneyrubble4827]

My 92 66 pumpmaster has a rifled barrel. Wish it had metal receiver. Ive reinforced plastic in all the pin joints in the pump mechanism.

[@joedokes8641]

A friend of mine had the middle one . He had thousand of rounds through it . You didn't see him with out that gun , probably slept with it . I had the Daisy 880 ( metal receiver ) and still do . 😁

[@WalnutandSteel]

Fun stuff for sure. I had a crosman when I was a teenager too. Was an old beat up thing I had gotten from my grandfather. But stock was missing but still shot like nobody’s business! He used to raise chickens and ducks at his house in the city and he used that gun to dispatch them as he needed. Not legal to discharge a firearm in the city limits.

[@billdye3530]

Always enjoy watching especially on the older items. The 760 is a great starter rifle for anyone. Plus it helps build up arm muscles while pumping lead & steel Downrange. Rumble for some reason isn't alerting me but I keep checking. Take care. I agree the sinus infection can be worse than some Covid inf.

[@WalnutandSteel]

The rumble app is a little clunky compared to KZbin but KZbin isn’t perfect either

[@billdye3530]

@@WalnutandSteel I know you have the Norinco copy of the Browning 22A. Just had Smoky Mtn. Guns & Ammo popup an ad on the Browning newest version. It has different drop on comb , tactical rail & muzzle brake added for $939. I will keep my $99 Norinco. Modernized isn't always better. Mr. Browning might like it though.

[@jake-nr9tq]

I got a crosman 760 (also called Revelation) in 1971. I shot it until July 1985. Great gun, spent a lot of hours with it outside. Traded it to beenam for a fwb 124 air gun

[@trevorjameson3213]

Great video, really enjoyed it. I have an old 1979 Crosman 766 that I bought at a pawn shop about ten years ago. It's like the 760 but it's much larger, and also shoots either BB's or pellets. It shoots great, very accurate with pellets. It has a rifled barrel. I had seen the little 760 at wal-mart and decided to buy it because it was only 30 dollars. And I have to say, I really enjoy it and it shoots just great, far better than I expected, being a smooth bore. I can get about a 2" group at 12 yards or so with pellets, free-standing, not bad at all. With BB's I can hit soda cans at 15 yards every time, so it's great with BB's too. I'm really enjoying the 760.

[@my357mags]

I have a first gen 760 with the brass bolt & it has the plastic foregrip.

[@matrox]

I had the Crosman 760 like the one on top. Bought mine in the early 70s. Nice little gun. Wore it out eventualy, the forearm also broke like your did.

[@gunnwild1]

My 760 was a bit more expensive, but I bought the kit. All of those are impressive

[@VashStarwind]

I had a 760 in the 90s, and that thing was sweet. It would go into wood about 3-4 inches, had a bit of power. I got a new one a couple of years ago, and man I was very disappointed with it, it would go into wood about 1 inch. So i think the older ones used to be more powerful than they make them now.

[@rodcornejo1717]

Thanks for your video on the CM 760. I happen to have the second generation for over 10 years, and I just recently acquired the new one like yours. Am ok with Crosman. Stay well and God bless. Have subscribed to your channel. Looking forward to more of your demos and comments. Am from the Philippines.

[@WalnutandSteel]

Thanks Rod!

[@joebauers3746]

I had a second gen one in the early 80's. To this day I have not found a gun that is more accurate with BBs. When I was a kid the birds completely stopped coming anywhere near my house... lol

[@dustinharrison3491]

I just got the newest generation Pumpmaster yesterday. I also have the previous generation model too with a slightly rusted barrel, unfortunately. Crosman sure does make amazing products for the price! I also have two .1377 American Classic's!

[@WalnutandSteel]

I have one of those too. Lots of fun, but a little disappointing compared to the older versions of the 760,

[@WalnutandSteel]

The older ones were made with a lot of metal and seem to be of a higher quality(at least in my opinion) the new one has no weight to it and feels like a toy. Compared to the older ones.

[@bobbob6162]

I have been watching your Vid,s Do stop and don’t leave…your special Ty

[@WalnutandSteel]

Not going anywhere, thanks for watching

[@muhammadsteinberg]

I have middle and newer one. Do you have a pellet clip? Better than single loading.

[@WalnutandSteel]

I don’t have a 760 with the pellet clip but I have several other model with it. I have had a 760 loaned to me with the clip

[@TheWalkWithAl]

Another good video my friend I really enjoy watching

[@WalnutandSteel]

Thanks Al!

[@WalnutandSteel]

I really enjoy watching your channel too!

[@marcthomas2482]

Good comparison Nibs.

[@mudbutton2]

Had a 761XL since 1978. Still going fine!

[@jonneet2126]

I have the newest model. The butt stock is slightly loose. Don't see how to tighten the darn thing. I also have a Daisy Model 35 smooth bore multi-pumper, and it out shoots my 760.

[@NormanQuinn-y5p]

I have a 760 d thats broken but it does have a rifled barrel

[@powerplay4real174]

Crosman made those copper coated BB's to save the rifling from my understanding because they allowed BB and Pellets to be used as Ammo but only recommend they Copper Head BB's and their Brand of Pellets so is that your understanding ? Crosman 🎯

[@chadbinette3201]

I had my father's old 760, had to be 1980s atleast, had a plastic butt stock but all metal reciever and the brass bolt and to this day it's the only gun Ive sold or lost, I had it in my barn for years with a crosman 2100 and used it all the time for rodents and suddenly I couldn't find it, so maybe someone took it , I used to find kids breaking in to.mess around and to this day I kick myself in the butt for not having it. I've never sold or got ridden of any other gun in my life. I'm 40 years old and still have my first real gun, a single shot .410, but everytime I see or touch a pellet gun I think of that old 760 and hate myself for not having it locked up or something.

[@Briarbuddy]

The plastic receiver started in 1983.

[@natesmith5393]

Great collection there. You might want to check the barrels though; my late 90s 760 had a rifled barrel IIRC, as did all the older ones (they might have made smoothbores too I dunno) I believe - I remember because around 2001, Crosman first went to the five shot pellet clip, fiber optic front sight, and smoothbore barrel, at least on guns sold at Walmart; they've since done away with the clip and sight, but kept the smoothbore barrel, except on the M4 version you have... That old Webley Nemesis is a cool gun too, I believe they made a shoulder stock for those at one point too.... A question too if I may. What temperature do you keep your garage? You never list the temp readings in your CO2 chriny results that I see, and I've found CO2 guns are at their best in the 80-95 degrees F range; some may disagree, but I've had poor results below 70-80 degrees. King Regards and happy holidays to you.

[@neiledwards8931]

I always wonder which is the better one 880 or Crosman accuracy wise and build whys .

[@billturner1960]

Loved this presentation sir as I can relate to the generational changes over the life of the 760 as I've bought a few over the years. A couple of questions,,,should you have time to answer,,,, Do you know if there were ever any 760's made with any kind of rifling in the barrel? I've never heard of any myself but do not know. Next question is do you know of any manufacturer that makes a quality .22 cal. pump pellet gun with rifling? If you've a recommendation regarding that then please, by all means, advise. Lastly, how far away was this target? I'm assuming maybe 50 or 100 feet? Really enjoyed this work of yours. Thank you for any input/response and please keep up the great work my friend!! 😎👍🦌

[@WalnutandSteel]

I did mention it a few minutes in. I was shooting around 10 yards

[@billturner1960]

@@WalnutandSteel Thank you. Any thoughts on my next purchase of a good .22 caliber pump pellet gun that is available with a rifled barrel,,,? For the squirrels that seem to want to move in with you this time of year? For years I've taken care of them with .22 cal. birdshot but man is that ever hard on a .22 cal rifle chamber,,, So are shorts and I want to just grab a great pellet gun for that and not destroy the chambers and rifling/lands in my .22 rifles. Thank you so very kindly for any recommendations! 😎👍🦌

[@WalnutandSteel]

I have heard a lot of good things about the crosman 362. I still need to get me one though

[@jhackett9482]

I have the new 760 and use it mostly with bbs. In the garage at 30 ft I do 3 pump which is about 380 fps and It groups in the same hole. I think high fps hurts the accuracy of these cheap guns so I drop down for targets.

[@billiewright7532]

If they have a serial number they are made 1975 and after. Before that you look on front of barrel band.

[@jerryees]

I inherited a Crosman 760 powermaster xl which needed to be revsealed wouldn't build any pressure. After rebuilding it shoots pretty good, but I was wondering when shooting with daisy pellets sometimes after pumping 3 to 4 times it won't fire the pellet. When shooting Crosman pellets it shoots perfectly. Wonder if it doesn't like daisy pellets? And when shooting bbs I noticed sometimes you can see the bbs fire and shoot crooked.

[@WalnutandSteel]

May still be a little low on power

[@jerryees]

@@WalnutandSteel what else could u need to do? I replaced the whole valve and piston assembly.

[@tylerparker3024]

What seals do i need for the older brass bolt model?? Where can i find those

[@WalnutandSteel]

Look up Crosman600repair on ebay. Its run by a guy named Henry Ford. He has kits for all the Crosmans

[@tylerparker3024]

Awesome thanks

[@jtmarley9821]

What’s your opinion on the Remington 582?

[@WalnutandSteel]

Very nice rifle I had one but sold it

[@jtmarley9821]

@@WalnutandSteel just picked one up not to long ago. Haven’t really seen any videos of 582’s

[@landscannersunltd.]

I thought the 3rd variant had the styrene stock and wood forearm. 1974-75 I believe. Could be wrong.

[@butterfinger1171]

You are correct

[@nobodyshome758]

My new 760 is definitely more powerful than my other two older ones and shoots dead on with a red dot, but I love um all!! 😎

[@RogerBrenon]

Your old ones need new seals then. Older ones are more powerful.

[@nobodyshome758]

@RogerBrenon Not from my experience. My 1969 760 was no where near my new 760 which shoots 396 fps at 3 pumps, 496 fps at 5 pumps, 559 fps at 7 pumps and 630 fps at 10 pumps. My 1969 760 was also just resealed by Henry Ford(official crosman repair) as well. Shoots nice, but not as strong as the new 760.

[@MrSonic1953]

is your area near where the balloons pass by? You know what I mean.

[@WalnutandSteel]

Maybe😉

[@MrSonic1953]

@Walnut and Steel I wonder if the balloon was "sick" with some fungus and spores?

[@wildcatcreeksurvival2414]

My mid model 760 has a rifled barrel.

[@WalnutandSteel]

Have you owned it since new? I have read a lot of people would upgrade to a rifled barrel. You could order a replacement for some other model and it would fit right on. But everything I read says all 760’s were smooth bore from the factory

[@wildcatcreeksurvival2414]

@@WalnutandSteel Bought it new back in the early 80's ???

[@powerplay4real174]

​@@WalnutandSteel Interesting 🤔 I see you paid $36 for your 2021 model and I paid about $38 or $40 for mine in 1973 and later $42 in about 1975 You got outstanding quality from those plenker back in those old days ,and they still a lot of fun now with a small fall in quality materials though. 🎯

[@WalnutandSteel]

Bet the 2021 won’t be around in 40 years though

[@terrybest8973]

Kinda like for November 1980 it will be N80 then the rest of numbers 77347

[@terrybest8973]

I got a rare model of the second version it came with a rifled barrel only made a few like that with metal receivers mine had never been shot untill I shot it it was a late 80 or early 90 s I'll have to look how you tell the year is the numbers first will be the month and then the year it can be in a letter like a will be 1 or5 will be a ,,E

[@koenraadderoeck9045]

Mister nibs , i have a qeustion ,wear com te passion in america from to like pumpguns from. in europa you view verry little pumpbuks.More knik buks springers . thanks for nice vid and have a verry nice day !!!

[@tonyjh146tm]

Dose 760 mean feet per square inch

[@WalnutandSteel]

🤷‍♂️

[@terrybest8973]

Sale that new one bud lol lol please get rid of it you did the head to head now it's time to let it go old buddy lol lol I'm just joking but I would they ok for a kid I guess but that's what we are just old men kids lol lol

[@tbump1104]

I sent an email but have not received a response. Did you get my email?

[@tbump1104]

email and pictures sent

[@tbump1104]

Hi Nibs, I have a first variant 760 and I am going to sell it and wondered if you might be interested because you seem to collect them but I noticed you dont have a first variant, please contact me

[@WalnutandSteel]

I added my email address in the description text.

[@tbump1104]

@@WalnutandSteel email sent