Head Unit Upgrade

[@MrCarlDixon]

Thank you for showing the proper way to pop the dash out instead of prying it

[@sneezy7169]

I really hope the parts description along with the vid has helped the viewers either install or see that an aftermarket head-unit in a first gen Veloster will work properly. A possible update vid showing the unit still in the car and working may come around!

[@sneezy7169]

Ohhhh yeahh! Ma boi the.razor.crest getting his Valentine’s Day gift installed!!! May not be full on step by step but hopefully it helps sum one!

[@2eroumgme753]

Anyone notice the lambo doors on he 🚗?

[@jacksubijano991]

Where i can buy that same monitor?

[@thomasproctor7800]

What's the name of the adapter that you used to maintain blulink and back up camera. And best place to order

[@sneezy7169]

On the vid description is the parts list. Everything but head unit I got from crutchfield

[@CarStereoExpressAiea]

can you tell me if the A/C controls are displayed on the radio and also the temperature displays

[@sneezy7169]

The option is there my my year velo does not have that in the odb output

[@TimBorka]

Best video I've found. What did you do about the mic though?

[@sneezy7169]

I used the one that comes with the aftermarket head unit. Placed it top of pillar. Never got around to putting it where the stick o e goes

[@christinarodea6231]

I have a 2013 veloster and Im wanting to replace the radio myself, if I just wanted to just have the radio and Bluetooth functions would I still need the idatalink maestro? Or is that something I would need for the steering wheel controls to work? Thanks in advance!

[@sneezy7169]

U need the axxess wire interface and the SPDIF to be able to use an after market on our cars! The only thing on the parts list in the description of vid that you won’t need for install is the RR MAESTRO. That I have just as a for kicks to display sum obd2 on the stereo screen! 1:00

[@christinarodea6231]

@@sneezy7169 thank you!

[@Wilbyn]

So I bought a pioneer radio, I went to best buy to install it, I got a problem when turning off my Veloster, the amplifiers, crossover stays on and you can hear a little noise coming from the speakers, it drained my battery, it only happen with the new radio, they put back the factory radio and everything shut down when turning off the car, they can't figure it out what's going on, any help?

[@sneezy7169]

In the description is the parts list u need to plug it in to all the stock features and it turns on and off as it should!

[@sneezy7169]

Sorry for the late response haven’t been on here to check for comments. I did my own install and have not had an issue with the unit since I have had it car. You have to get everything except the maestro module. That is only to tap into OBD and display gauges.

[@San77720]

is it the original hyundai veoloster camera ur using??? cuz for me the camera does not work on the pioneer screen, it does not support it so i had to install another camera down

[@sneezy7169]

Yes it is the stock camera. U need a module. Check the parts description! Everything except head-unit is from crutchfield

[@xtrongarage9666]

Wish the video quality was at least 720p not 240p. Feel like I was watching a video from 1991.

[@Wycepr]

How much inch is the screen?

[@martins.8317]

Hey bruh…do u still have the original head unit and did it have Navi ? My t-screen is bad and just trying to get it working….Thanks

[@sneezy7169]

Still have my oem but no nav system.

[@CR-up3ui]

Donde se consigue la base del radio

[@raulmunoz137]

Amazon

[@GelloBoy]

Where did you get this head unit?

[@sneezy7169]

I got it off Amazon! It’s a really good unit. Can display vehicle info of newer cars!

[@Neo--X]

I'll send you my VHS camcorder so that you may at least almost double your video resolution from 144 to 250.

[@Killertomato84]

i can almost count the pixels