Products that we use and recommend: ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
@tyfinnegan17033 жыл бұрын
A tip : watch series at Flixzone. I've been using it for watching lots of of movies lately.
@kaydenkorbin2253 жыл бұрын
@Ty Finnegan Definitely, have been watching on Flixzone for since november myself =)
@tylermulligan28002 жыл бұрын
What if one low beam is out, the light is fine, and the fuses are fine?
@aquamusprime4870 Жыл бұрын
Same
@lizardmanbass8 ай бұрын
Prolly the wiring is what I’m hearing
@albertodionisio182210 ай бұрын
You are a big help for me same thing happened to my Colorado I appreciate sir Thank you so much God bless you
@moshealex Жыл бұрын
Just found, like you told in this video, that my high beams not working in position "auto", just because problem with contact on this mode, but when I switched to manual mode, like you recommended, its working. Thank you, guys!👍👍👍 Have to find now, how to open this button.
@eml-gf2bj2 жыл бұрын
hey guys, thanks for the video, it helps alot guys, maybe i work on my car now guys and hopefully guys I am able to figure it out guys, anyways guys, hopefully I'm succesful guys and if it doesnt' guys then maybe guys i can have someone else guys work on it guys, but if not guys then guys I don't know guys but i appreciate guys the video guys.
@isaiahsantana6206 Жыл бұрын
Intro had me waiting for Scotty Kilmer.
@scottgarvy Жыл бұрын
Where is low beam fuse or relay located?
@saffarburair2 жыл бұрын
Hello sir, please I have problem in right side the low beam not work and high beam work! I replaced the bulb and still low beam not work! Thanks for your cooperation
@LTeli2 жыл бұрын
I have the same problem did you fix the issue?
@Dumb.aiclips Жыл бұрын
I am having same problem too
@felixreginal6291 Жыл бұрын
Me too
@pablopicasso409110 ай бұрын
Me too
@royrice8021 Жыл бұрын
If you see a vehicle with a burned out headlight, it’s a GM. What and not why.
@aristasierrajones10 ай бұрын
That still didn’t help me. My lo beam on one side isn’t working. Checked fuses, replaced bulbs and whole headlight. So would that mean it’s in the BCM or just the dimmer switch?
@radioace318la3 жыл бұрын
I have the same problem with my 2015 chevy spark. Only it's the other side. both low beams work, when I go to high beam the right headlight goes dark. The left one is just fine. I too replaced the bulbs, I checked all the fuses. Still, the same problem. Is there a relay that may be bad? I found a PDF file of my wiring system for my car, but it's almost 30 bucks. I want to avoid having to buy the whole schematic diagram for this car if I can. Thanks! from Louisiana.
@nuggs982010 ай бұрын
Did you figure it out? I'm having the same problem.
@نسيمالجنوب-و7ظ4 жыл бұрын
Sir. Can you make a video about dodge dart rear shock absorber changing.
@georgenoyes190 Жыл бұрын
My 2018 Chevy Cruz drivers side headlight has been replaced but it still shuts it off when you put on the brights. Just the drivers side cuts off
@georgenoyes190 Жыл бұрын
I have also looked at the fuse and there is not one there in 38
@ownSystem8 ай бұрын
3:23
@eddieabundiz47983 жыл бұрын
Have this problem on. 2013 Buick Enclave passenger side bulb doesn’t come on at all high or low beam. Fuses look good and replaced bulb. Still won’t come on. What else could it be? Driver side works fine.
@stevenjrrice56943 жыл бұрын
Check the ground cable. My bolt was rusted out and broke. I took a wire brush and a self tapping screw and it works fine now.
@rockfresh1993 Жыл бұрын
@@stevenjrrice5694 2nd part made no fuckin sense 😂😂
@stevenjrrice5694 Жыл бұрын
@@rockfresh1993 there is a grounding cable that comes from the plug for the light. That cable attaches to the body by a bolt. On my vehicle, the bolt was rusted enough that good connection was lost. Since I couldn't get the bolt out, I took the cable and attached it to a different spot nearby, but had to make a new hole using a self tapping screw, and make a good connection by wire brushing the paint off of the spot the ground wire made contact. If I have to explain it any further, then please, PLEASE don't try this yourself.
@rohitmotorides3 жыл бұрын
Mine everything ok as u shown but still both high beams nor working
@marcussolomon10685 ай бұрын
Dlwhat was the fix for this..mine is doing same no brights
@texaskidzuk Жыл бұрын
My 2002 Chevrolet Tracker has no brights except when you pull back the lights stalk and no nights at night except when you pull back the light stalk.
@timlee88233 жыл бұрын
What size fuse
@Michael-ss1el8 ай бұрын
My head lights go off come on when they want to.the fuses not bad lights can you point me in a direction
@JesseNajeraАй бұрын
Whole time bro was talking bout the high beams I need to know about the low beams
@Xx-lq9su2 жыл бұрын
Hey guys
@felippe5501 Жыл бұрын
Hello, I would like to know if you have a video explaining the Cruze failure. Sometimes I leave with the car and stop, when I turn it on again it keeps failing and blinking dashboard lights.
@LS7AI3 жыл бұрын
Ur intro is too long... seriously
@AYouTubeChannelwithNoName3 жыл бұрын
Nah I think it should be longer 😏
@stansmith40542 жыл бұрын
Use the forward button. It wasn't long anyway!
@jillgoebel69962 жыл бұрын
My 2003 Chevy Impala low beams won't work
@davidschlabach84362 жыл бұрын
Mine was left low beam not working all it was is the fuse
@JoseRodriguez-gi6xf9 ай бұрын
Which fuse?
@Michael-ss1el8 ай бұрын
🎉
@gregupham94743 жыл бұрын
Appreciate your video. However you said "guys" 37 times by my count. That's too many!