HEADS & CAM 5.9L Magnum Dodge Dakota R/T | PART 6

On this Heads & Cam 5.9L Magnum Dodge Dakota R/T Engine build Part 6 we are upgrading the fuel pump in the gas tank to an AEM 400 to replace the broken factory fuel pump that is not pumping fuel to the injectors. We then test the fuel pump and its finally working so we move on to read the file from the vehicle using HP Tuners and then fix the broken exhaust hangers on the truck and discuss some other mods coming for the 3rd get ram 1500 SRT-10 with LED fog lights and some other mods along the way!
Here is the fuel transfer pump we used
amzn.to/2D9m9ZO
Here is the AEM Fuel Pump we used
amzn.to/3hDf4jt
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com...
👇 *SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX* 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
Contact Clint [phone]
Mention Boosted Motorsports and save 20%
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#DIY #Garage #Wrench #ManCave #Honda #Dodge #SRT #Performance #Carproject #Truckproject #Salvage

[@remier22]

I have the black housings on my 07 1500. They are brighter than factory and look alot better.

[@TheFlR3StOrM]

I am enjoying watching this build as much as I did the Blue Street Beast :). This one with the Hughs Air Gap I am waiting to see how she runs with it because the M1 is very hard to find these days so I am having to get a Hughs. Mopar Muscle is all I can say :)

[@bobbyd9583]

the hughes engines FI airgap is amazing. I've had mine for about a year now and it's ripped hard. Sadly I tossed a rod yesterday so looks like a 408 kit is in my future. :) Compared to the M1 it gave me some additional bottom end I was lacking. The support brackets are a bit fidgety, I might mill out some nice aluminum parts during my refit if time allows.

[@chrispickering8386]

I have basically those same fog lights on mine but with the black housings. I love them, once you get them adjusted correctly they're bright enough to make you forget to turn on your headlights sometimes lol

[@jeffreyheinzelmanjr3317]

Those lights are sweet fog lights. Keeper or give them to someone who needs them

[@chrisdejong2481]

Try those fogs out i think it could be a nice transition chromed fogs then smoked headlights still would look sharp on the white and clear bright when they are on im sure 👍

[@jasonmatis6669]

Bake the LED fogs and paint the housing and put them back together.

[@johnsmith-qz4bv]

nice work looking good

[@bdogjr7779]

Awesome Jon《☆》Nice progress Bro🤓👍🏾Could I do this job by cutting an access panel in my bed rather than removing the bed ?✔:*: Greetings from⛾Florida🤳my friend🤓🗣🔊☮✌👍🏾

[@nadronnocojr]

Let’s get MOre subs here guys Great channel !

[@rneff013]

I knew you had to be close. I live in Moval. I have a 2005 Dodge Ram 1500 with a Procharger P1sc. Didn't you swap pulleys on your Ram? How did that work out? Anyway, keep posting the 5.9 build!

[@nadronnocojr]

Who did you use to remove the speed limiter? I have a 99 she’s stuck at 117 . Awesseomm that you guys tune your own sick!

[@USMC1371]

What size are those rims and tires on Jason’s Dakota boosted? Look way wider than 9” replicas I’ve seen.

[@BoostedMotorsports]

Those are stock 2003-2005 viper wheels 👍

[@USMC1371]

Ah got ya, I was thinking they were smaller viper ram replicas but couldn’t tell being all blacked out. Thanks

[@austinrife7212]

By chance could i get a copy of the stock file? Just purchased a rt and im pretty sure its been tuned but really wanna compare it to a stock tune

[@peterboissiere9684]

Silicone spray is better for rubber and plastic

[@davidledford6482]

wherers your help,its goin too slow..come on msn...instant please..

[@phillanassa759]

Are those fog lamps available for 2000 Durango and Dakota with factory fog lamps? If so what is the brand, I'd like to get a pair. Also, if you have recommended LED headlights and tail lights for the Y2K 'Rango's and Kota's I'm interested, if I can buy them through the channel I will. Thanks, love the channel and all things Mopar!

[@davidcosper6500]

What exhaust system is Jason running?

[@Stevnhawking]

Currently spintech dumped behind the cab, still deciding what to change to.

[@ZROSTARS]

Where do you dump old fuel?

[@bdogjr7779]

Don't dump it《☆》Send it to Uncle Tonys Garage. He uses it to clean parts🤓🗣🔊☮✌👍🏾

[@kota7824]

Please tell me you live close to me in Washington State. Hahaha.

[@BoostedMotorsports]

SoCal

[@kota7824]

I noticed the mailing address. After i posted this. My bad.

[@davidledford6482]

take 10 minutes or so why not,an crank it now,whats the hurry to not do this..everything must be instant