Heat Press Machine not getting hot

Video to send to Super hero bowl in an effort to trouble shoot

[@dsmith42790]

this video may be 7 years old but im so happy you posted it, you saved me hundreds of dollars with this simple repair

[@natsomoza8043]

Thank you so much for sharing this and thank you all that left comments about the wires attached to the plate being burnt and become unattached. That definitely helped!

[@tammymartin3294roadtoruin]

What about the bottom plate not heating up the top is working fine but the bottom part isn’t even warm!?

[@jessicamiles6407]

@@tammymartin3294roadtoruin The top plate is the only thing that heats up.

[@MurseKirkDunn]

Saw this video the other day. Had the same exact problem and symptoms. Bought a new fuse. Didn’t work. Took the bolts off the top of the heat plate and exposed the wiring. Found that one of the wires had come off. Looked like cheap wiring overheated. I cut back some of the wiring and exposed better copper. Connected an electric washer and connected it back to the heat plate. The “off” light was gone and it was heating up. Apparently the temps we were getting was the room temperature. This solved my problem and I hope it helps someone else. If it happens again. I’m going to take it apart and go with a heavier gauge wire to withstand the high voltage flow at long periods. Be blessed.

[@ArtDaBarber619]

Thanks for the advice. I will double check my wires for damage & solid connections.

[@crittney3232]

can you make a video how you exposed/changed your wire

[@BINKSTARZZZ]

I fixed it was the wire the side that goes in the timer box i opened it and there was 1 from the 4 wires looks like steel threat it was lose i put thin foil around it and stuck it back where the solder was now it works again

[@jessicamiles6407]

Mine did the same. Take apart the top element and you will more than likely find a loose wire.

[@damittraeveans2616]

Thank you. I fixed mine.

[@thenives]

Have to be re wired the plate wire came loose. Check one of your other attachments and see if it heat up if so it’s the plate wire

[@shirleyrandt5417]

My heat press where fuses are kept broke and so did the fuse. Can someone please tell me where I can order a new fuse holder and fuses. Thank you

[@Alansari3902]

I use The Similar one Works Properly, But The Wire Heats UP!! How Do I Fix it?!

[@ashleyvezina6538]

This by dreamvan haveing same issue it stays at 393. And wont stay at 400

[@elemen7713]

Did you try to put the thing up

[@VILLTV]

What size fuse does it take?

[@jasminsilva9790]

Can someone help me I took off the box and checked everything and everything looks good but It stays at 70

[@imtisashi1995]

My heat press gets heated after switching on but when i press t-shirts the power goes off.. please help 🙏

[@rolpie11]

Hi, I just fixed my wife’s heat press with the problem of not heating past 78 degrees. I had to remove the heating plate and repair one of the wires attached to the plate because it had burnt and become unattached. I hope this helps

[@fancy2725]

that's the problem im having how do I change it please help

[@ArtDaBarber619]

Do you recall which wire it was?

[@marinaschmitz4942]

Hey! How did you get the top platen off?

[@keishabailey4954]

My wires came undone trying to redo them i have two white and a black wire please help

[@dsmith42790]

you saved me hundreds of dollars with this simple repair thank you

[@rafaelgarcia9334]

Am having the same problem..

[@joenikawilliams3894]

How did you change the fuse because I think that's my problem

[@MsCyclemom]

Do anybody know what size fuse 15x15 heat press machine

[@latashawoodral9871]

Same thing is happening to me won’t go passed 40

[@mariafernanda-rv2ec]

Mine was doing the same exact thing after sooo many tries and videos i actually figured out. My wires from the presser to the box was loose. My hubby rewired the back cables from the presser.. nottt the box. If it makes sense but it finally worked. 😚hope this helps anyone else

[@23antoniobernal]

Mine did this today I was wondering the same thing I bet the box over heats loses the small bolts 🔩

[@KarmenHeights]

I just fixed mine. There was a white wire that came lose. I only had it for a month.

[@keishabailey4954]

Can you help.me my wires came undone and i have no clue to which is who and what

[@KarmenHeights]

@@keishabailey4954 you have to undo the back and put the wire back on. It was really simple.

[@IPOWERTV]

same thing happens to me...

[@ranasd3533]

plz what should we do

[@rolpie11]

Remove the top of the heat plate and check the wires connected to the heat elements. They may have burnt and become disconnected

[@brendaramirez8196]

Mine is fresh out the box and the tempter keep getting hotter.

[@peninsilyn]

I HAD THAT PROBLEM ONCE, SORRY I SAW THIS LATE, BUT THE WIRE TO THE PRESS IS LOOSE. THE ONE THAT CAME FROM THE CONTROL BOX TO THE PRESS, SO I SCREWED OFF THE PRESS THEN I PUSH THE WIRE IN MORE SO WHEN I SCREW IN IT AGAIN THE WIRE STAYS INTACT. AN BAMM MY MACHINE WORKS, CHEAP WIRING IS YOUR PROBLEM, BUT I GUEST YOU FOUND OUT BY NOW, SINCE AM SO LATE.

[@davidrodpul]

that was exactly my problem, now is working again thank you Sir

[@RobynFolarin]

STEFAN PENINSILYN this was helpful I’m bout to try it now

[@r.w.3307]

@@RobynFolarin did it work for you Im about to try it now

[@RobynFolarin]

Rachelle Walton nope I couldn’t reconnect it after I took it off it basically all fell apart

[@r.w.3307]

@@RobynFolarin ah man. We retightened ours and it did end up going back to normal.

[@alicialo8634]

did you fix it yet??

[@kimberlyjones2640]

Hello did this every get fixed for you? I’m having the same problem

[@ranasd3533]

what should we do

[@babaakafather1094]

Kimberly Jones did u ever fix da heatin problem am havin da same issue

[@fashkamorudeen3456]

Hello, are able to get help from people. If you do kindly help me as well as having the same challenge with my machine

[@rolpie11]

Check the wires connected to the heat plate. It may be burnt and no longer connected

[@ericaburton2396]

Fh

[@preciousdugas780]

.

[@KC08RAS]

Did u fix it

[@tacomaclubhouse7668]

For these machines you set both temperature and time on the bottom display. It's the display in green. First you set the temp, then push set, then set the time. The top display (in red) only shows the current temperature of the heat press. It's a confusing design that would be less confusing with instructions. In this video, her press is set for 40 degrees.

[@MsCyclemom]

I think it's a wire in side the box may have came a loose

[@MsCyclemom]

I have the same machine I blow out my fuse and been trying to find out how to replace it can't find the right fuse

[@MsCyclemom]

I had to go Inside of mine the Male end melted so I went to the auto store and bought a pack and replaced it I guess it got to hot

[@MsCyclemom]

Can you tell me what size fuse I go Inside please

[@leonardo8917]

Nis

[@gelonapolis4218]

MAGBIGTE KA NA

[@leeanne9841]

Wow that was rude