Heater motor - fitting new brushes Ft. Tool Girl Hana

[@stevelang6987]

in all the videos on everything i have reserched this guy was by far the easiest to understand ty.

[@AndyMechanic]

Cheers Steve :-)

[@oskarandradev147]

Andy with Hana! Very good idea, we can learn more, because you explain all very easy, I appreciate and finish a good job with Hana, thanks man!!!!!!

[@AndyMechanic]

Thanks Oskar :-)

[@joshu417]

boy am I happy I looked up blower motor repair today lol.

[@glowmar]

Another great video and with Hana who is the best. I love lath work.

[@kelvenguard]

them brushes by weight would equal GOLD by weight.... Love Hana... from CANADA

[@harleydavidson521]

Enjoyed Hanna's soldering techique. When I was in soldering school (we called "soldering" sodering, so the "L" was silent), there was a saying as to how good a solding job you did.... it was "The bigger the blob, the better the job". Anyway, keep up the good work.

[@JackdeDuCoeur]

Hana is just the best!

[@SteveRobReviews]

I haven't seen an armature turned in decades - nice to see and Hana it's working just fine :)

[@amirulusumudeem9106]

Im just broke my aircond motor blower, and im do not know how to fix tiny spring in the carbon brush, after watching your video, guess what the aircond conditioner run as usual. Thanks for the video, u guys doing very good job, thanks again.

[@GrumpyGarry121]

She was messing around when you went out Andy. Suggest you give Hana a dirty car or bike to wash next time your off camera, bucket full of suds and a sponge, just to keep her busy. Might as well film it too, make sure she doesn’t miss anywhere! Just a thought.

[@AndyMechanic]

+Grumpy Garry Thanks Grumpy for the heads up. I'll be sure to give Hana a chore or two for her insubordination! ;-)

[@chadharmon5716]

Andy Mechanic 😆

[@robsorgdrager8477]

Ok I'm not even in your shop, I'm at my own and I'm fuuuuuulllllyyyy distracted , I've got volvos piling up in my stalls, I can't look away ! Tool girl hana is very easy to look at.

[@modemnaz1]

Yes Hana it is perfect!❤️❤️❤️

[@Drew-Dastardly]

Unfortunately pure copper is hard to machine and just smears. I think a very low spindle and feed speed on the lathe could help here. Also you should have clamped the shaft not the armature windings, both to get a proper true and also not risk breaking the armature. Finding the true centre should be done by rotating the headstock spindle by hand and using a DTI on the other end of the shaft

[@AndyMechanic]

+Drew Dastardly Thanks for the feedback. Usually I do clamp only the shaft but the chuck had swarf in the spiral gear preventing the jaws fully closing unfortunately...all fixed now but understand what you are saying.

[@timjon1122]

I don't really understand the point of putting it in the lathe anyway. Some high grit sandpaper would have been fine.

[@oldskool1807]

Ok, let's be straight up honest here. 99% of us are watching to see Hana wear less and less and shorter and shorter....right? You do some good projects and explain them well, I mean when I'm actually listening, you explain things well. Just watching and waiting to see how low Hana will go with those short-shorts as well as any other ideas she might come up with, or down with. Great videos. Keep up the great work. Thanks.

[@AndyMechanic]

Cheers Jeff.....I'll keep doing what I'm doing for sure. Thanks for the awesome feedback. I'll pass on your comments to TG Hana. Cheers Andy

[@xbullshet]

@@AndyMechanic I did not see half of video, dam,,... however, before ordering brushes, should work on commutator and if successful, the go to ebay or Aliexpress and get any brushes really cheap and any chemistry... 90$ - that's total ripoff...

[@SV-pt9qw]

What did he fix?

[@renevanderjagt3289]

Hopefully she has found herself a good man whom appreciates here efforts in the shed working on there classic car

[@michaeld_68]

Perfect Hana!! And you to Andy . Lol.

[@Julakani11]

I’m waiting for next video hope she’s top off good job bro lol

[@NotHarry-er3wg]

My dad and I use to turn a commutator with it in a drill and and using a file and emery. Some you can turn and some not most can be saved. New brushes and bushes and again good for 15 plus. At least we knew how it was done. not dribbled together with no bearing lube and worn brush.

[@greekkidshows9373]

I appreciate it Andy Cheers 🍻 U r 😎

[@ken1675]

view with hana with bike perfect view from where im standing:) :D

[@greekkidshows9373]

I bet if u sent Hana, she would have got a better deal 🤭 I like Hana's shirt. If it's a shirt Is it work clothes or her own Have I mentioned how good this channel is

[@rkan2]

One could diy brushes like that from larger ones for less than 10£...

[@AndyMechanic]

Yes, definitely, the brush supplier ripped us off....

[@forevercomputing]

I don't know why I am watching these. I know how to do some of these jobs, but watching a n00b is entertaining. And a woman actually getting involved.

[@molnarrobert1893]

Always lube the bushings!!

[@greekkidshows9373]

Hahahaaa! 👍👍 I like the song u chose for the finish

[@Polecat54941]

Loved the video as this can apply to any motor. very expensive brushes and is there any reason you could not use brushes from another item and file them to fit? How much would you charge to ship Hana to the UK? I really need a Tool girl and this one is perfect!

[@michalmuszynski6942]

No need to lubricate upper and lower bearings?

[@georgedawsonjr450]

This is how all the TG should dress well with the half shorts as well. It's not nudity by law if they are covered. It does not say they cant be see through. But that in the USA. For that law.

[@brianshanahan3878]

Great job Hannah. Who was that guy in your shop?

[@AndyMechanic]

Funny! !

[@cpowerscpo2002]

nice job andy

[@wyrtwister4260]

Lube the bushings and shafts before to re-assemble the motor . I was expecting the brushes to be carbon ? Wyr God bless

[@AndyMechanic]

I think they were made out of animantium given the cost! Lol

[@22highlander]

now i wanna be a mechanic

[@istvanmeissler2238]

My local small town hardware store has various size brushes in the fastener aisle. I think they sell for 1.29US each. Just buy the closest size bigger and sand down to fit. The guy that sold you those brushes doesn't care about repeat customers nor about what people say about him. Not a good business model.

[@AndyMechanic]

+istvan meissler So very true. Last time I purchased brushes from him they were very much cheaper...maybe $5 each! Needless to say, I won't be going back!

[@firebladex8586]

I like that Suzuki. Looks like late 70's early 80's?

[@scatcat1994]

Honestly man then Suzuki GN's have looked the same for about 40 years.

[@jasonputtock4428]

curious. if hte spring was too short could you not put added packing behind that spring to push out further.

[@rrhprosser]

Bosch washing machines are the same - I've had to pay $100 for 2 small brushes. Silly thing was the brush holder, complete with brushes already fitted was cheaper (but out of stock). If you're lucky you might be able to find something much cheaper ($5 - $10) that's just slightly oversize that can be filed down to fit. Re the damaged spring - it looks a lot like something you might find in an old ballpoint pen (BIC Flick). I notice you didn't undercut between the segments of the commutator - Is that no longer recommended after skimming?

[@AndyMechanic]

+Richard Prosser Hi Richard. Yep did undercut using the hacksaw blade whilst the armature was still held in the lathe chuck. Did try get generic brushes locally but we're out of stock this time around and customer needed motor back asap Thanks for your input. Cheers Andy

[@dumitrascuclaudiu7097]

Mna.... Pants could be shorter....

[@Teribus13]

$94 for those brushes 😱 I hope the guy in that shop was wearing a mask! Those are some expensive brushes

[@22video11]

Lovely blouse Hana

[@chadwickwood9843]

Lol, it must be quite warm in AUS.

[@Larshjort]

New Zealand, but yes:)

[@JaceD4V1S88]

This from a toyota previa?

[@AndyMechanic]

No, a Hilux surf if I remember correctly - it was a couple of years ago when I did the repair. Cheers Andy

[@glennsmethurst2235]

Should have eBay searches dc brush - a few bob to your door.

[@AndyMechanic]

Great idea and I'll definitely do that next time round but I was against the clock on this repair unfortunately...

[@bigdaddy741098]

Ummmm Yes Hana, that outfit is working, it is most definitely working. And so am I...... if you know what I mean 😉😉

[@claytonking70]

Picked up a new motor for my dodge for 31 dollars.

[@NotHarry-er3wg]

TOOL GIRL HANA!!!. HI!! .......................................................................oh........hi Andy... I'm surprised you found brushes for this Heater motor. Where there is a will there there is a why! Nice Job to you both. Heep learning Hana looking forward to this channel renamed Hana Mechanic. GO GIRL! GO GIRL! AH HUH AH HUH Youcandooit!! 8?)

[@electricengineer624]

Is Hana From Russia Man your videos are hot Dam

[@AndyMechanic]

Cheers :-) Hana is a kiwi girl 100% & yes, I very alluring woman for sure, a huge distraction in the workshop!

[@liten48]

yes its working lol

[@madmat2001]

No oil on the bronze bushing? Este es no bueno.

[@hooch330]

Sorry but them shorts dont do her any justice what so ever.Good vid tho

[@AndyMechanic]

Agreed....that's why I now provide all the Tool Girl outfits - quality control implementation :-) Cheers Andy

[@SeriousSchitt]

That sweet smell you like there Andy, is, as you well know, 40% lead!

[@grantlucas6678]

Is hana a Aussie she has a smooth a accent

[@AndyMechanic]

No, born in New Zealand, in the South Island. She does have an attractive accent, I concur good Sir. Cheers Andy

[@stuffbywoody5497]

You were robbed blind on the price of those brushes. Even here in Oz they're only a few bucks.

[@AndyMechanic]

Yep. I won't be using them again!

[@ussilov]

Just get a new blower motor bro lol.

[@alellish9167]

94 dollars for 2 brushes? Hope you got kissed after!

[@rahrah8076]

You can order these brushes.. all different kinds on eBay for a few dollars and they come in 10 packs..what a rip off

[@albertocervantes4432]

Where is your daughter!!!!!

[@electricengineer624]

By the way, where do you get all these beautiful chicks

[@Wallysmassage]

😂😂😂😂😂