Heath's first Burnout in Castlemaine Rod Shops WARBIRD

Heath's first Burnout in WARBIRD and his first proper burnout in roughly 3-4 years. Now his ready to take on the Avalon Burnout pad for Drewy's 40th Burnout Skids.

[@mshafer2006]

If it wasn’t for Cleetus, I wouldn’t have known about Warbird or Killa Bee(sad that James popped the motor of Killa Bee) anyway. Warbird by far is the most beautiful car that does burnouts I have ever seen. Thank you to Cleetus(Garrett) for introducing the Aussie burnout scene to us here in the United States. Much love to Castlemaine Rod Shop from Minneola Florida

[@CastlemaineRodShop1976]

Thanks Mate, Glad you found us!

[@schwags1969]

@@CastlemaineRodShop1976 Same here, did Garrett buy Killa -Bee or is it on permanent loan? Asking for friend...

[@jeremyrendell4333]

I love that you left the freedom factory sticker I. The back window. War bird had an epic trip and that is an awesome reminder that it roasted tires on another continent!!!!

[@2pi628]

Yes, that's nice omage to Cleetus and company.👍

[@bubbakushingtonIII]

This right here is by far my favorite skid car.

[@CastlemaineRodShop1976]

Thanks Mate, We feel the same way!

[@missinglink4205]

The hills are alive with the sound of warbird 👍🇦🇺🍻

[@CastlemaineRodShop1976]

Haha that would have been a good way to start the clip.

[@jeffallen5387]

Warbird is an absolute beast! It was a privilege to see her at the Freedom Factory and now to see her back home.

[@mastertyreshredder]

Stawell is the best skid pad in Australia in my opinion

[@aSinisterKiid]

Warbird is an absolute savage beast. Glad to hear it screaming again back home.

[@CastlemaineRodShop1976]

Thanks Mate!

[@produKtNZ]

@@CastlemaineRodShop1976 what happened at the end with it pissing coolant and oil smoke?

[@danawalters-xu5nu]

Holy moly. Cove it's over, kind of, you got to bring the warbird to the freedom Factory to have a visit from Killer B. And probably when every burnout contest in the states. That is, the biggest, blower, I've ever seen on a car. I think Garrett would appreciate it... Rock on warbird!

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@Wayne-Kerr_Rudy-Zarzoff]

That 170 is purring like an angry kitten

[@winstoncryer7606]

✌️😎👍👍. Sweet skid

[@rjnation5042]

Great to see it back in action guys, thanks for the look,

[@brandonsearle990]

Agreed. It's been to long

[@poeyd9624]

Something about this car . ❤

[@Mick_Hinchy]

Damn heath! Killer skid

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@brianbeilmann2992]

Oh ya. Amazing.

[@claytonbaker5858]

Thanks Frank 👌👍

[@pip303]

Hell yeah brother. Aussie freedom rips!!

[@johnwilson1794]

Great job for a first go mate. A little polish and it will be perfection.

[@CastlemaineRodShop1976]

Fingers crossed mate, the more seat time the better.

[@matthewwilson2991]

Awesome to see it made every bird animal in a 2 miles radis go what the hell .

[@Kingy308]

Top effort, good revs 👌

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@davethompson6760]

hell yeah brother

[@blackbeard308]

FROM AZ KKCW. YOU GUYS KIK AZZ 🕺💃 KEEP GRINDING

[@paulcoote3094]

Great skids mate. Cheers from the canberra nats crew.

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@kadinthomson6403]

Need to get this car into the burnout masters game

[@deathangelgaming9312]

Just wondering if your going to come back to the good old USA to let warbird fly again loved seeing that machine here in the states

[@CastlemaineRodShop1976]

Fingers crossed we can one day mate.

[@jasonbarrett7756]

It's good to see it bad where it belongs 🇦🇺💪

[@jeffreymorris4827]

Love from Colorado Springs Colorado USA. The only place in the world with "TEGRIDY" 🚬💣👽💩🚲🎣🇺🇸

[@aldopine]

Thanks for showing that the blue state of Colorado still doesn't educate the leftists there. 👍😂

[@kevinmckinzie]

HELL YEAH!

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@pauleasterbrook2036]

Good Shit

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@robwigglezz944]

What a ripper

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@evelkoloski]

Back in the day i had what i would consider this cars Northern lil red head cousin.... a 61 Falcon with a lil tiny blower on top of a small block chevy. Great fun, only made about 500hp but way more than i needed on the streets of Vancouver BC

[@CastlemaineRodShop1976]

Sounds like a Party!

[@woofersd2383]

Nice to see the Hotrod burnin again. James could learn a few things from this skid.

[@mikeyoung6351]

They need to do more blown injected big block stuff and fuck the turbo ls efi combinations off, shit motors. I've noticed a lot of Aussies go blown injected big blocks and Americans seem to love turbo Ls shit, so boring. Hate it.

[@TheEnergizer1965]

He didn't really do anything different in killa bee, than what's being done here

[@GWhizzJhangaPakato]

KAWkaw yea the bois

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@chrisward2115]

Great video Guys! Just wondering! where is Marc? Haven't seen him in a video for a while.

[@CastlemaineRodShop1976]

He needed a change and left to pursue a different career and to spend some more time with his family.

[@chrisward2115]

@@CastlemaineRodShop1976 thanks for the reply! Glad to hear he's ok and hope all goes well for him.

[@joeyburkey]

I was wondering the same thing

[@nazzcar7]

Sounds unreal. Probably the best it's ever sounded 💪 Any reason why you guys didn't use Nogas performance this time around though?

[@CastlemaineRodShop1976]

He isn't doing Engine Builds anymore mate.

[@nazzcar7]

@@CastlemaineRodShop1976 ah spewin. Can't go wrong with dandy engines though 👌

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@amraceway]

Great car. Tacky low rent vinyl Rod Shop sticker on windscreen lets the team down.

[@CastlemaineRodShop1976]

I'll pass it on to the crew mate, Thanks for watching.

[@jackdillon5664]

I’ve been in warbird

[@CastlemaineRodShop1976]

It's even better now!!

[@bryanketcham9922]

spicy

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@jackrichards1863]

Do you expect to boil za motor like that? Had one I kept boiling til the valve gear sounded like it was all going to fall out. Cool down start up and drive some more. But there was no expensive building and that behind the engineering within.

[@CastlemaineRodShop1976]

Everything is good with the engine, We found that it was all due to a dodgy Radiator cap, He shut it down with the revs up around 2,500 that's why it ran on at the end. Checked it all out changed the wheels over and it fired right back up.

[@harlandmcnall2579]

Just me here sitting over in the USA and a serious fan of warbird sounds like you locked her up mate tough break you fluctuate the pedal to much and I saw the steam coming out of the bottom of the radiator just before it let loose you Jackstand Jimmie'd that one same death as killer bees motor lol

[@CastlemaineRodShop1976]

No problems with the engine mate, it was a dodgy radiator cap that caused it to overheat, When he shut the magneto off it ran on, Nothing bad just sounded odd. It fired right back up and we drove it off the pad

[@Mick_Hinchy]

What happened at the end there? Did seem happy at shut down

[@CastlemaineRodShop1976]

Heath thought it was overheating but it was just the Cap on the tank, When he shut the magneto off it ran on, Nothing bad just sounded odd.

[@cwhaaatt]

seems kinda crazy to shut a water cooled engine off that quick after that much work but sick skid and tuff motor by frank

[@CastlemaineRodShop1976]

He had the revs up around 2,500 when he shut it down that's why it acted the way it did shutting down.

[@scene24man]

It’s amazing tires last 30 seconds to be honest

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@poiter5876]

hey cleats this is just an aussie practice run oi oi oi

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@ZeroFox1970]

Where is the LC ? 2nd burnout definitely better very nice.

[@CastlemaineRodShop1976]

Hopefully Real Deal isn't too far away mate.

[@ZeroFox1970]

@@CastlemaineRodShop1976 thanks bro cheers 🇦🇺

[@peters.8094]

Chance of it going on the 1/4 mile ?

[@CastlemaineRodShop1976]

It’s not set up for the 1/4mile so most likely never unless it has a massive change

[@aarondouglas345]

What kind of tires do you use where you can get such a long skid time before the blow

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@A7Xfan2007]

Was there a fallout with the nogas’s?

[@CastlemaineRodShop1976]

No mate, No love lost with the Crew. Benny isn't building Engines anymore that's the only thing that's changed

[@FrequencyOfThought]

oi you got a liocense for that burnout car?

[@1112223333111]

6:00 thats weird the oil pressure dropped for a second there

[@tippyc2]

Pretty sure that's fuel pressure, not oil.

[@1112223333111]

@@tippyc2 nope she's oil. watch Cleetus "our first time driving warbird" and he points it out at 3 : 53

[@chatta6013]

Without Marc, channel has a different vibe, miss the old guys on the channel

[@Rob-ru3ht]

I haven't watched this channel for a bit, what happened to Marc?

[@chatta6013]

@@Rob-ru3ht him and the other guys r gone from the rod shop, the guy that is in all the vids now changed the vibe he comes off cocky r arrogant r something, it's just different.

[@guyemartin]

How’s the V12 going?

[@CastlemaineRodShop1976]

It’s still waiting to be looked at mate. Will update you guys as soon as we have some decent content.

[@guyemartin]

Cool mate thanks

[@rossmarzano]

These gender reveal parties are getting out of hand.

[@CastlemaineRodShop1976]

Must be a gender neutral reveal...

[@rossmarzano]

@@CastlemaineRodShop1976 warbird is a they/them lol

[@Bathurst_1000]

Put UPDATES ON YR V12 - LJ not this crap box ..........

[@CastlemaineRodShop1976]

If we had an Update we'd release it mate... Give it time

[@johnwilson1794]

People have to realize that shops that do builds like that have a business to run during the day. Don't start watching Project Binky then. I think I'll be dead before that's finished.

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI

[@jakeyb6245]

First

[@CastlemaineRodShop1976]

Thanks for your Dedication and for watching!

[@FYIWDWYTM69]

Ferrari engine rana!????.....qq

[@mikeyoung6351]

Jesus, what a shame that car turned out to be....

[@CastlemaineRodShop1976]

Coming mate, Can't rush these things.

[@davesracingchannel9261]

kzbin.info/www/bejne/oF7EcpaeocpmipI