Heavily Modified Holden LX Torana Hoist Tour

[@mackenziec-f119]

I really admire your DIY workmanship. There is a clear vision for the design with no dodgy shortcuts that I can see!

[@bradmccracken8304]

Awesome Vid Heath. I had no idea it was so modified underneath! Thanks for taking the time to make and post it.

[@steveveness3829]

G'day from West Australia, as a 3rd gen Engineer I have to say, nice execution of thoughtful engineering. At almost 59 I guess I Am considered old school sooo that being said; I take my hat off to you. ( yep old school sign of respect for a fellow creator).😉🙂👍👍

[@Hezath]

lol, thanks very much much, Steve.

[@ruppyhouse]

Great video Heath! I like the way you edited in the appropriate build pictures to explain the modifications. Cheers, Steve.

[@Hezath]

Thanks Steve! Yeah look it's nothing flashy, but I have a lot of photos from the build that will otherwise be forgotten. So I might incorporate them into more videos like this.

[@mattbarnsley9619]

Great video mate - really interesting to hear you talk through all the mods and explain what you did with everything - awesome work! I can't wait to go for a spin in the beast soon!

[@shaneomacgardner4034]

Awesome work mate heaps of skill in planning and undertaking, looking forward to more 👍

[@Hezath]

Cheers!

[@markdrewett149]

So glad i watched this video. Very well spoken young man with plenty of novel ideas. Good job.

[@stevenJEDI3]

Really nice modifications you have done there, enjoyed the presentation also good clip

[@Hezath]

Thanks very much for the kind words!

[@rodbender7946]

love the content mate, keep it coming

[@frankalarcon635]

Nice work mate!

[@anthonywhelan8373]

Finally someone with some common sense on diff choices instead of a nine inch

[@Hezath]

Haha I blew this one up a few months ago... ripped a few teeth off the crownwheel. Not sure I would rule out a 9" upgrade if that were to happen again!

[@anthonywhelan8373]

@@Hezath look into the fg turbo Borg Warner twice the size you need pinion bearings and take alot more power stock Friends vl turbo ended up in the 8 sec bracket with locked borgwarner so they can take a fair bit and no drama on floor clearance

[@frankiesultana376]

Wow great mods

[@billyray4272]

Sick setup

[@hadeesdrudge]

Great video!

[@Ringholden]

Good on ya,mate !

[@desseton3140]

Great build video. Wondering if you going do one on your motor, especially on the LPG mods.

[@Hezath]

Hey there Des, thanks for the feedback mate. I could certainly look at doing that, although I'm not sure exactly what is of most interest about the motor. The engine itself isn't set up any differently for LPG, other than the fuel rails, injectors, etc. Is there anything inside the motor you want to know more about?

[@desseton3140]

@@Hezath curious about how you went setting up the injectors etc, & what capacity they achieve. Also why you when LPG. The intake certainly looks different - throttle body style if I'm remembering correctly. I was looking at LPG set up , back in the 80s, for a twin turbo 308 motor, as petrol injection was available then. To get around the ADRs. Also noticed you don't have a exposed wiper motor either. Is this hidden or deleted. Like to see how that designed if hidden.

[@Luca_____355]

Awesome Heath, great video, look forward to seeing it all together soon! Where did that sick red Torana go that used to be a great table in the background?

[@Hezath]

It finished its duties of being the street's official smoke maker and we had to wish it well in its next chapter of life.

[@michaelgray2049]

What a shitbox! Haha just joking mate. This car is epic!! The most thoroughly thought-out street machine build I've ever seen.

[@candycat5821]

Nice work , and I really like the weight saving methods you used throughout the engineering process. Do you mind mentioning what weight your at with your hatch ? This is one thing I want to do to my LX hatch, atm with sbc , 9 inch, harrop brakes , tko600 and chassis strengthening kit I am at 1460kg, not so light weight anymore. Enjoyed your videos.

[@Hezath]

Awesome! Thanks for your comment. Yeah, they're heavier than people think! (they were never as light as the workshop manual suggests they were) Mine is 1,300kg on the dot.

[@stevesloan6775]

Cerakote would be worth looking at to coat your raw alloy with. I’m using MS-5100 at the moment.

[@Hezath]

Thanks Steve. I've heard of Cerakote but really don't know anything about it. I'll have to do some research. :)

[@maestrovso]

Very impressive design and custom fabrication work. A shout out from Up Above in US. The LPG tank at the end is a shocker for me. How common is LPG used in performance cars Down Under?

[@Hezath]

Thanks very much. LPG is NOT used very commonly in performance cars down under, any more. A decade or two ago, it was more common. Unfortunately it's becoming a lot less readibly available, and it may not be on this car forever. :(

[@craigparker2244]

@@Hezath - owning an LPG-only car, I can confirm you're 100% right. R.E. the availability of LPG. Now that Taxis are all heading down the Electric/Hybrid path, even less petrol stations will be keen to stock the stuff. The only reason I have it, is that it came with the car.

[@302esky]

Cool video ..I noticed that you have alloy spacers fitted to the engine x member and the chassis rails, Is that so your engine sits lower in the car ?and does it affect the handling of the car as well thanks

[@Hezath]

Hey there mate, sorry I never replied! Somehow missed this comment of yours. The aluminium spacers you see are just the mounts I made to move the crossmember forward a little bit relative to the car chassis. Due to various packaging limitations, I actually wasn't able to lower the motor further down in the car. Perhaps with a dry sump and a scratch-made crossmember that would have been possible, but the motor is pretty much in the standard position after all was said and done in this build.

[@cvap1]

Love the engineering in this car and great it gets used as it should . Im about to embark on my own Torana build. Love the moving of the front end for clearance and slightly longer wheel base. . Question , Is the engine also moved forward or have you relocated it in the standard position ? Thanks

[@Hezath]

Awesome! Glad to hear you're enjoying it. Good question. I did make a simple jig and cut the engine mounts off the front end and weld them back on further back to compensate for the K-frame being moved forward. Sorry, I forgot to say that (and a hundred other details) in the video.

[@stenchcivic1515]

mint job

[@spiro5327]

Hello there, very nice. I am considering a new TKX in my car. How did you go fitting this box as far as tunnel size. ??: I think the TKX is more compact than TKO. Thanks

[@Hezath]

I made a tunnel for this car, but for a TKX, you don't need to touch it. The TKX didn't exist when I started building this.

[@spiro5327]

@@Hezath ok thank you

[@yahtadi5152]

I just knew that a car can go on without shocks in the front

[@ficacrew7050]

I have missed your voice man!! :D

[@Hezath]

Hahahaha!

[@bigal878]

Bloody great job mate. Loved it and would love to see the car one day if you ever take it to Melbourne car meets. Also, have you sealed the aluminum that you have sand and water blasted to it keeps its great look? Thanks

[@Hezath]

Thanks mate. It will certainly be at a lot of Melbourne car meets, probably somewhat soon. The water blasted parts have just been left raw. They seem to be a bit easier to keep clean after water-blasting, but a clear coat etc would be easier again (with the risk of it yellowing or breaking off, which I don't really want to invite)

[@sandrapoyner1353]

Torana,s were exported ,Especially Korea where they were used as taxis,s 👍👍🦘🇦🇺🤠

[@ACE-gk5gi]

Wow..it's not fucknnn fairrrrrr I just want one...lol LOL ..NICE...ya goofy m8te from Australia