Heavy Duty Wheel Bearing Installation and Adjustment - Bower Heavy Duty Bearings by NTN

[@9555aaron]

This was very good thank you for this information

[@NTNBearings]

Glad it was helpful! You can check out some additional videos on heavy duty truck bearings over on our Bower Bearings by NTN channel here: www.youtube.com/@BowerBearings

[@vicpetrishak1077]

Very well done ! Thank You !

[@stevegreen2432]

Fantastic explanation, but.. that hub needs ballancig!!!

[@NTNBearings]

Thanks for watching!

[@vicpetrishak1077]

Heating aluminum wheel hub with torch will ease installation of cups .Not acceptable practice to hammer cup onto cup .Install 5/16-18 tap into battery powered drill and clean hubcap holes . Blow holes out with air . Install new bolts with anti-seize .Coat both side of hubcap gasket with anti-seize , gasket will remove easily in the future .

[@petejohnson8397]

you are hired if in the Cincinnati area. Let me know. I pay well and on time.

[@oby-1607]

There's a cartoon showing a caveman hammering a rock into a stone wheel. That's what you are if using a hammer and not using a press. Correct tool for the job and procedure makes for a reliable repair/replacement.

[@JamesTetterton-n5x]

How can I get wheel bearing adj chart

[@tonyhowe3676]

Good information aside....I can't stand poor videography. He is not the topic....the video should have closeups on the item they are talking about all the time....there is no need to have the guy in the video frame.