H3-3D Gimbal + iOSD Mini + FPV Transmitter Installation - HeliPal.com

[@Overheadexposure]

This video, without narration even, is the clearest tutorial I've seen on how to wire the FVP for the phantom 2. Got my soldering iron....got my heat shrink tubing....got my wire strippers....I'll let you know how it goes lol (never soldered anything before).

[@HeliPal]

thank you. I am so happy that you like it and we will keep taking videos like this :)

[@Overheadexposure]

HeliPal That was rough (I'm simply not good at soldering...but it doesn't help that I bought a cheapie Walmart iron and the iron was literally falling apart mid way through....the metal of the iron being melted away), and mine looks kinda ugly (didn't have as much room so I had to put the transmitter a little crooked and the antenna extends out past the landing gear instead of nicely within it like yours) but it works so who gives a crap! I thought for sure that my solder joints were not good enough, but I guess they were. I didn't have one of those wire holders so what might have been a half hour job turned into an hour and 15 minute job lol. Anyway, thanks again...it works. No more guesswork when shooting videos.

[@wag1254]

Thanks bro, you save me a lot of time. Best tutorial ever.........

[@SiXFIIPS]

kzbin.info/www/bejne/jKWahKF-aNBrprc

[@molevideos]

Hi, congratulations, very nice video. Question, is there a cable/bus in the rear of the GoPro or is the only connection made through the micro USB port? My Gimbal H3-3D only has the micro USB connector, but I seen some gimbals with a connector in the rear, where the GOPRO connects the LCD panel. So I am not shut if I have the wrong Gimbal. Thanks in advance

[@HeliPal]

It is the old version of H3-3D gimbal which some client loves it more as using LCD panel doesn't require ribbon which reduce the risk of breaking the ribbon :)

[@day2273]

it's great for new beginner such as me...! Is it possible set up iosd mark II on Phantom 2 new version ? which one FPV transmitter for better long range about 2000m ?

[@HeliPal]

Yes, iosd mk II supports Naza-M V2 that means it support phantom 2. In the following test Phantom 2 with 500mw FPV New Record - HeliPal.com The video signal reached 3KM. The video transmitter is a 5.8GHz 500mW and it is the video transmitter in this installation video. For more information, please visit www.helipal.com/storm-all-in-one-fpv-combo-deluxe.html This video transmitter can usually reach 1km to 2km but 3KM is a record. you may not repeat it. If you want to go longer such as 2km. You may get this antenna www.helipal.com/5-8ghz-flat-panel-super-long-range-antenna-male-receptacle-14dbi.html If you want a high resolution FPV system, DJI Lightbridge is a good choice. It reached 2km in this test too. Lightbridge Range and Quality - HeliPal.com

[@sidymohamedbengeloum1614]

Merci beaucoup vous êtes les meilleurs

[@rasmushaversen]

Why do i need to connect the Gimbal to the Phantom though the power connect board v2? What does, it do? In another video you made, you just connected the gimbal directly to the Phantom, without the power board. Whats the difference?

[@BrentRoberts01]

do yourself a favor and buy the DJI AVL58... plug and play. no soldering.

[@KustomKreation]

I did a setup like this with an ImmersionRC 600mw 5.8ghz and I can see the IOSD mini but not any video for the GoPro. I have a h3-3d also. Any troubleshooting ideas?

[@HeliPal]

Please contact [e-mail] and our colleagues will be there to help you.

[@fotoamgamgfoto3695]

Hi! What is the PIOUT of this gimbal? I assome the 8pin input gets the power and some information to cvontrol pitch angle etc? Is this pinout available somwhere? I ahve no DJi drone but want to used an old gimbal like this for other projects.

[@HeliPal]

H3-3D Gimbal is compatible with A2、WooKong-M、NAZA-M V1 w/PMU、NAZA-M V2、Phantom w/PMU、Ace One、WooKong-H、NAZA-H flight controller.

[@jacksimple3766]

@@HeliPal So I have to buy one of those FC systems to make it work :( unlike other gimbals it only works with FC, not just handheld :(

[@binomonkey]

Thank you so much for this video. Made putting it all together a breeze. Cheers!

[@Jozieduke]

Hello, I was wondering what the small module board is that you are tapeing onto the bottom of the phantom next to the antenna that goes from the phantom then to the gimble? When I power up my phantom doing this setup procedure it keeps burning out one of the two resistors right next to the cam plugin inside the phantom. (Its the plugin that is right next to the zenmuse plugin on the main board). There is two little rectangle resistors I guess thats what they are. And one keeps burning out when I power the phantom up. I have noticed in other vids that they dont use that little module that you use between the phantom and the gimble. Didnt know if that could be my problem. I hope this wasnt too lengthy of a question. Any info would be very helpful. Thx

[@HeliPal]

Rollin Dirty On Rails it is a filter that fix a problem for a batch of gimbal that launched in 2014 . The new version of gimbal don't need this filter.

[@dnejeff]

Hi there, Do you guys have any videos and info on installing a IOSD mini with an H3-3D with the Black Pearl FPV system. I have searched the entire internet and found zip. I have no idea what connects to what connects where. Any help would really be appreciated!

[@dnejeff]

Sorry, I meant to say I a flying an F550 with Naza v2 GPS

[@mando1187]

+Doug Jeffries did you ever find an answer? im trying to do this now

[@IzmirDikilili]

kann ich dies in dji phantom 2 vision + einbauen ? glaub mein wifi sender ist defekt

[@HeliPal]

+Azem Vurucu DJI Phantom 2 Vision Plus is a closed system, it’s not allow use FPV system on it

[@erik.noya.]

Hello, can you please send me the link from the cables (red and black, 2 pins and the av with 5 colors cable, 5 pin i guess) that i need for the same equipment from the video (transmitter to phantom and iosd mini)? i want to buy them. Thanks and nice video.

[@HeliPal]

Please contact [e-mail] and our colleague will be there to assist you

[@egiman1982]

Ok now you tell me how to get rid of the hittable lines going across the whole screen??? I tried LC filter DIY and it does not work:-(((((((((

[@HeliPal]

Please contact us by [e-mail] and our colleague will be there to assist you.

[@bigcharliewilcox895]

Hello does anybody no if you can hook this up to the P3S drone

[@day2273]

oh... which one monitor is much better ?

[@HeliPal]

www.helipal.com/lilliput-7-super-fpv-monitor-w-ips-panel.html This monitor is equipped with IPS technology. iPad and iPhone is using the same monitor technology so that the screen is more readable even under sun light. For total solution, please visit www.helipal.com/storm-all-in-one-fpv-combo-premium.html

[@ThomasKim558]

Is this phantom with iOSD mini and FPV transmitter stable? Because it looks kinda unbalanced

[@HeliPal]

It is fine and we didn't encounter any problem and the iOSD Mini location is even designed by DJI.

[@ThomasKim558]

okay thx!! Going to buy it soon

[@flameheart817]

i need help .. i use naza v2 .. i connect to the pc ... and error .. the name error is dji usb virtual com ... how can i fix this?

[@stewpid254]

ello, should you hook the OSD to the computer to download the software first or just hook it up to the DJI first?

[@robertpower2949]

Does anyone know what the part is called at 6.52? Mine is missing..Thanks. HeliPal

[@HeliPal]

It's 8-Pin Cable coming with DJI Zenmuse H3-3D Gimbal package

[@robertpower2949]

@@HeliPal can you buy it separately? I bought a used phantom 2 and it came with a zenmuse but no connector.

[@HeliPal]

@@robertpower2949 Sorry this item is discontinued a while and we can't to restock it anymore :(

[@robertpower2949]

@@HeliPal thank you for taking the time to reply!

[@DrohneschweizCh]

i need help , i dont understand how to connect the iosd to the zenmuse and i also need to connect it to the pmu naza? what about the data link?

[@HeliPal]

+Drohne Schweiz Please contact [e-mail] and our colleague will be there to assist you :)

[@romanomm77]

I Loved that Song!!

[@hayuuliin2741]

what xiro xv can be like this

[@enriquehiguerasz]

I turned on the transmitter without antenna, no longer works? not turn on the red light

[@HeliPal]

Enrique Higueras Please contact [e-mail] and our colleague will be there to assist you

[@uheep1]

+Enrique Higueras Connect power to your transmitter without an antenna and you have toasted it! Junk. NEVER power up a transmitter without an antenna or load connected.

[@fiestaburger]

Where is the package for the transmitter and monitor? Thanks

[@HeliPal]

www.helipal.com/storm-all-in-one-fpv-combo-premium.html I am using this fpv solution for my Phantom 2 and F550 too. It is good, stable, the range is around 1km to 2km

[@fiestaburger]

Do I have to use that monitor? Because I am just going to buy that transmitter separately

[@HeliPal]

Joshua Burger www.helipal.com/lilliput-7-super-fpv-monitor-w-ips-panel.html

[@eszklanpb]

muy buen video, muchas gracias por la ayuda ofrecida queda demasiado especifico todo el proceso. buen trabajo.

[@rappeezy]

Great video. Thanks to the music I'm sure my household will think I was watching porn.

[@diceecid3392]

Do you offer this installation service, if so how to request it?

[@HeliPal]

Dear Friend, you can simply select this services upon your purchase of Phantom 2 by selecting "install for me" option. Many thanks :)

[@RideFaster]

put everything except the transmitter inside tho...

[@oldmanmtb1443]

How much and what's the distance.

[@HeliPal]

You can take a look here :) www.helipal.com/storm-all-in-one-fpv-combo-premium.html

[@The_Best_Mia]

see in the image on the screen photography mode, the image I get GoPro fpv system

[@terencehallows1822]

Excellent video, but, maybe should do this without battery attached.

[@glaucusfilms7497]

hello, whats the name of this monitor?

[@HeliPal]

It is Lilliput 7" Super FPV Monitor w/ IPS Panel www.helipal.com/lilliput-7-super-fpv-monitor-w-ips-panel.html

[@marcelobiurrun]

Buenisimo el video.

[@zemzem2011]

Très bien fait

[@secondlaw407]

Very useful. Not a fan of the music LOL but nonetheless, very useful so Thank You!

[@djonegloveTV]

Thanks for video

[@wyldslanerail]

The lines come about from the USB lead connected to the Gopro. The problem is the one connector is used for both video and to charge the Gopro itself and that induces the interference. The trick is to remove the USB plug from the ribbon cable and cover over all but the bottom two connectors with a small piece of sellotape. Only the bottom two connectors are used for the video. It is fiddly to do but it does work,I had the same problem myself. The Gopro will no longer charge in the gimbal but that's not a big deal for me,would rather have the clean picture. This is the mod www.phantompilots.com/download/file.php?id=7560&mode=view www.phantompilots.com/download/file.php?id=7561&mode=view although in that case they have used a small piece of plastic to block the connectors.

[@guglielmodicarlo4139]

whats with the cocktail lounge music,LOL

[@davidwim]

The music sounds a dreadful as the WII console with golf loaded up.

[@sidymohamedbengeloum1614]

Merci beaucoup vous êtes les meilleurs