How to Fit FPV Fatshark Video Tx & iOSD Mini to DJI Phantom 2 H3-3D Gimbal Quadcopter

[@marktime48]

So, where did the rest of the video go?

[@RobertChapman2005]

I am trying to do this same upgrade. Did you ever do the other half of this video???

[@MarionvillemodelsMultirotors]

The video ends at 6:45. Due to an editing error a blank section was rendered at the end. There isn't anything missing from the video as it only covers the fitting of the vTx. See my other videos for the fitting of the gimbal.

[@arongatt]

so if i wanted to use an fpv camera { not the gopro} will this wire work ? cos i cant see how the camera will connect ...cos this wire i assume will work only with the gimble to be able to take video out ? btw i got the fpv hub which i ordered from you { v fast shipping } thanks ...... shame dji didnt make longer wires option with the hub , i would have gone for an internal build instead having everything underneath... anyway like i said im looking for an fpv quad which the f450 looks great for a start just wanted to know flight time and if this wire would work with an fpv cam. thanks

[@helpaholic]

At 6:42 u went to black where is the rest of the video Thanks

[@commenge]

is it a must to have iosd to be able to connect the gopro ( through gimbal ) to the fatshark? my setup : > phantom 2 > gopro3 >h3-3d gimbal with anti interference >fatshark predator 200mw tx

[@conroyz28]

This will be my exact set up along with the DJI Datalink. Do you know if the mini osd, fatshark, and the datalink will all hook up together??

[@conroyz28]

And where can I get the cables; If from yall. How long does it take to get to Texas

[@MarionvillemodelsMultirotors]

Yes that would all hook up no problem. Sorry I don't ship to the us.

[@conroyz28]

Awesome. Thanks. Any idea on what to call that cable. If Im looking for it over here

[@TheBazzaboy09]

Marionville Multirotors if i want to connect a different cable for a different camera. where would i connect the av - and the av plus. to keep getting the telemetry

[@TheBazzaboy09]

Marionville Multirotors if i want to connect a different cable for a different camera. where would i connect the av - and the av plus. to keep getting the telemetry

[@bobsmith2692]

what kind of hit do you take in time degradation when adding iOSD and FatShark TX?

[@joe502wilson]

was the best install video ive seen till it suddenly ended

[@chrislonghurst9996]

Nice video bud. Where can I find the lead for the Fatshark tx. I live in the uk.

[@MarionvillemodelsMultirotors]

You can get them from First Person View.

[@MacFixer-DK]

Marionville Multirotors Hi there. Anyone kind enough to piont me to the exactly plug and play cables i need for this. I have the Phantom, Zenmuse H3-3D, iOSD mini and Fatshark. Need plug and play cables for all this. Looks like its the same in this movie. Just not 110% sure where to get the right exactly cables.. Thanks ;) Erik

[@karl7432966]

what is the video delay from gopro to the fatshark goggles? and what wire kind of wire is that?the plug and play wire? sorry about this but im a complete noob about the fpv system im still making a list on what to get for my FPV setup right now i got phantom 2 h3 -3D Fat Shark Attitude SD V2 w/5.8G TX and camera DJI mini IOSD GoPro hero3 Do you guys have any suggestion on what else do i need?? hopefully i can finish the list and buy it before September starts, so i can use it for my video project

[@MarionvillemodelsMultirotors]

There's isnt any delay on this kind of system. The plug and play cable is available in the uk but not sure about other countries.

[@djioman1729]

Hello Where could I get the wire you use to connect the iosd and the fpv to the phantom

[@MarionvillemodelsMultirotors]

What country are you in.

[@djioman1729]

I'm from Oman. I'm using dji phantom 2 with storm 5.8Ghz FPV, Boscam 5.8 transmitter, Boscam RX-LCD 5802 monitor and the IOSD mini. I'm not good on soldering cables. I need blug in cable I get it from www.helipal.com/storm-all-in-one-fpv-combo-deluxe.html And now the monitor stop working at all after I use it for 2 or 3 times. :(

[@commenge]

Dji Oman www.firstpersonview.com/cables/phantom-2-iosd-mini-transmitter

[@DjDrop1dannysfilms]

what connects the gopro. ?

[@MarionvillemodelsMultirotors]

Video feed is taken from the back of the gopro via the Zenmuse gimbal.

[@DjDrop1dannysfilms]

Marionville Multirotors thank you

[@achase9998]

AUGHHH!! I finally find the video that shows exactly what I need to do, and it goes black halfway through!!!! PLEASE fix this! Such a good tutorial, but I need to see the second half!

[@Nabokov50]

It was going so well...``

[@PigWrangler]

Why so much black at the end of your video? lol

[@davidwim]

Thanks for HALF of the video😂😂

[@MarionvillemodelsMultirotors]

G McMurran that was all of the video.

[@davidwim]

Marionville Multirotors so why was there a black picture for 6min?

[@MarionvillemodelsMultirotors]

G McMurran i was using a new editing program and it added the blank bit on the end.

[@davidwim]

Marionville Multirotors oh sorry about that.

[@JasonLundgrenn]

It's like the end of the Sopranos....I think he's dead, guys.

[@syfriamedia]

Very helpful...check some of my videos out