$25 vs. $300 Monitor Arm - What Stands Do I Recommend?

I think monitor arms are a great investment to any desk setup. And you don't have to spend a whole lot to get a decent one. Or you could... Like I just did.
VIVO Monitor Arm:
amzn.to/2peXfBs (US)
amzn.to/2BHkwPg (CA)
Amazon Basic Monitor Arm: • The Best Monitor Arm F... (Full Review)
amzn.to/33Xrdsy (US)
amzn.to/2pTeCaV (CA)
amzn.to/32I5Vz2 (UK)
Ergotron HX Monitor Arm:
amzn.to/31JsqSH (US)
amzn.to/2NdB0np (CA)
amzn.to/345O8lH (UK)
Monitor: Dell Ultrasharp U4919DW Monitor
amzn.to/2Wc0AAJ (Amazon US)
bit.ly/2GjPa4E (Dell US)
amzn.to/31QTUGN (Amazon CA)
bit.ly/2Ewr5GZ (Dell Canada)
--------------------------
FTC: Not sponsored. I can't believe I spent $300 on a monitor arm but no regrets.
As an Amazon Associate I earn from qualifying purchases.
--------------------------
Music Credits:
chill. by sakura Hz / sakurahertz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/chill-sa...
Music promoted by Audio Library • Chill - sakura Hz (No ...
► For More Awesome Gear ◄
Subscribe - bit.ly/1Uzynun
Twitter - / mrdavidzhang
Instagram - / mrdavidzhang
My Video Gear - bit.ly/davidzha...

[@dstarr3]

4:24 "And with a ten-year warranty, this will probably be the last monitor arm I ever need to buy." I, too, plan to die in the next ten years.

[@EmergencyChannel]

Coronavirus, natural disasters, crazy national leaders, rising cost of living. I’d give myself 10 years, yeah.

[@willjepson7770]

Dave Starr thats optimistic.

[@sxccessful5626]

Shrek damn you called coronavirus

[@EmergencyChannel]

@@sxccessful5626 Anybody looking at Chinese news a few months ago could have predicted it would be a problem outside of China soon.

[@DeeHawkDK]

If a product has a 10 year warranty, it means the manufacturer is confident that you can't break it with normal wear and tear in 10 years. Which means it will likely last at least 20 years and up to a lifetime if you treat it well.

[@karlmarx2651]

When a monitor arm costs more than your monitor

[@PwnageJ]

dammit i was about to say the same thing

[@hithereperson8137]

No shit

[@phillylove7290]

I bought that $300 one and it is freaking awesome. I built a set up like the villain from Grandma's Boy. I don't even use a desk. I made a recliner that has a 20 x 20 piece of wood on each arm for a Razer chroma gamepad a mouse.

[@phillylove7290]

"When a monitor arm cost more than your monitor it is time for a revolution as the fall of capitalism is near" Karl Marx

[@karlmarx2651]

Philly Love rich boi. Im not saying its bad. Im saying its expensive

[@thebigbonk]

Ah yes the office setup, with a massive 49" ultra wide

[@cheffromspace9771]

I will never go back to a standard resolution.

[@NathanElcoate]

Just got one today and I love it.

[@Danny-pq3jo]

@@NathanElcoate is it worth buying ? Been considering buying the Samsung 49 inch for a while now

[@NathanElcoate]

@@Danny-pq3jo Hi yes definately, it's increased my work output dramatically even upgrading from a 34". Have had no issues with it, gaming, work and media art workflow are all very easy on the massive panel.

[@matthewarnold1776]

this is hilarious haha

[@jessebach8224]

Probably the best review I've seen on monitor arms, covering important information/tips and caveats to monitors arms, often not seen in other review. Thank you!

[@then1One]

The Amazon Basic monitor arm is also made by Ergotron.

[@Shifterfire]

I have the same arm, but in silver/metal and black. And it's branded as Ergotech I believe. So Amazon just slapped their brand on it. Which is a good thing I guess.

[@sean68777]

All made in China by OEM

[@ReiEvangelista]

Q guys. Can it pivot 90°? I'm looking for one that does.

[@Shifterfire]

@@ReiEvangelista Yes, it can.

[@FlashGenTV]

Yeah they are based on the Ergotron LX range

[@MickeyTech]

I would recommend the $999 stand 🔥

[@Bazlightyear007]

Mickey Tech based on?

[@serialskeptic]

Only if the $99999 stand is out of stock

[@brylemejias5475]

Lol apple

[@_White_]

Woosh

[@n8n8n8n]

I wouldn't.

[@vasipro]

3:07 "I can't believe I spent this much on a stand..." Apple: hold my beer.

[@balazsdinh1910]

This has to be the first-ever normal and non-bs review I have ever watched, finally some good content

[@kinocchio]

Apple: that’s cute

[@nothatsacamel9187]

ㄑㄑㄖㄕㄨㄛ

[@nothatsacamel9187]

Sorry I had Chinese on

[@pcje]

@@nothatsacamel9187 XD ㄎㄅ

[@User30929oouehf]

Sá? Tàüpe mêm.

[@BBond88]

@Hassan 2k Whiteside I'm an Appletard, and im sad i have no monitor mounts on my display haha. but im going with a pair of amazon $35 ($25 with the current $10 off one) for my flanking monitors :P

[@rangersmith4652]

The roughly $80 Ergotech Freedom arm has been great for me. It has a wide range of load weight adjustment to accommodate light or heavier monitors, something most users will appreciate.

[@garrydye2394]

I find it interesting that many youtubers are starting to use the same voice and rhythm when they speak.

[@xjunkxyrdxdog89]

They chase rewarding trends.

[@RaynesX]

Your videos are the best out there for this kind of stuff, and you should be proud. You show everything, I was worried you might not show how low these go, but you did, so thanks!

[@UnderdogTactics]

Your videos are just so classy and professional. It's refreshing.

[@evanzhao3887]

This is definitely the clearest and the most exhaustive monitor arm illustration video. Very Practical and Helpful. Thanks a lot!

[@pieterjanvl]

Great explanation! I've been comparing a few monitor arms for two 24 inch displays but it's hard to see where the big differences are in different price ranges. With your video I know what to look at when I'm buying one, thanks!

[@DavidTurner11]

2:42 I use electrical junction box cover plates to help stabilize my monitor stand.

[@PPL-jj9pj]

"25$ monitor arm can be good as much as 300$ monitor arm" *Apple had never seen such bullshit before*

[@fancystacy]

Depends on your needs. Some people do not buy such things at all during their life. If you constantly change position of your display as I do you need a good one which doesn't brake after thousand tilts or rotations.

[@stephaniepearce3130]

😂😂

[@justin94block]

you have a whole cinema in that room.

[@louisczar6483]

I have the Huanho dual monitor mount, costed me about 60-70 dollars and performs amazing, have had it for almost 2 years and nothing has gone wrong, totally recommend!

[@truthof7382]

BE VERY CARFUL WHEN ORDERING! The Vivo (first one he talks about) in the video is not the one his link points to in the description! You will see the one in the video has a double joint at the hinging points where the 2 arms come together. This allows him to push his monitor all the back almost against the mounting pole. The one his link points to will not even come close to going back that far. I should know, Im not happy I now have a return I have to make because I ordered here. Pay attention to this when ordering if it is important you you.

[@abyde]

Thanks for the heads up. Do you happen to have a link to the correct arm?

[@williambain6832]

Great reviews and food for thought when researching arms for ultra-wide monitors like yours. The stands that come with these monitors are horrid and take up half the desk workspace, another issue is that the monitors - being curved - are about 32cm (12.5 in) away from the wall in the middle and 41cm (16 in) from the extremities. Other heavy-duty mounts do not allow fluid motion especially the up and down panning of the display which comes really handy when using a motorised standing desk. The Ergotoron HX you suggest can now be found at £192 ($240) which is well worth it considering the 10-year warranty and the added workspace as well as allowing easy access to the rear of the screen when needed without having to call 2 other people to help hold the screen. Defo a no-brainer. Thanks!!

[@igfoobar]

David, I love your desk setup videos and have found myself browsing your channel more than once for setup and equipment ideas. That having been said, I do hope that you buy a real keyboard someday.

[@boomboom6577]

This video is so helpful and well-organized. I love everything about it. Wish all instructions videos were like this .

[@tasmaniandumbass]

I do not care about monitor arms at all, but I have to tell you David, this was an oddly compelling video. I watched the whole thing and now I feel calm and focused. Thank you!

[@nicksneider5463]

Something also worth mentioning with arms like this is that the price for the arm generally reflects the length of the warranty. The higher the cost the longer the warranty.

[@dirozx]

True the amazon basics arm is the exact same arm as a Ergotron LX just with shorter warranty and lower price.

[@ImSimpIicity]

Not true@@dirozx

[@dirozx]

​@@ImSimpIicityactually yes, checked it with Ergotron and even has the branding on it 😂

[@DaedalEVE]

I’ve had all sorts of stands from $25-$400... and honestly the $25 one seems to work the best for me.

[@falconloverxxx7182]

ye same

[@lexwaldez]

Big fan of Ergotron - have a lot of them at work and the ability to adjust the tension in the arms is HUGE. Just bought a new Ergotron for the wife's home office setup. Buy once, cry once. Totally worth the extra dollars.

[@LarthMedia]

I want to thank you for the recommendation. I Ordered the vivo on a whim after watching your video not being confident that it would work. I was able to get it to work and I love it. Thanks again!

[@847MicRoss]

I had my VIVO's for almost ten years. I like them so much I bought there projector mount.

[@VickyKatara]

Do you have a projector?

[@carsonlight_lapse6394]

still cheaper than Apple's stand ;)

[@azmah1999]

@Dan Apple's stand is different only in the sense that it is worse. It looks shiny but has the same range of movement that a lot of stands that come bundled with other monitors. Sure the screen itself is amazing. The Mac Pro is super powerful and is actually not overpriced when you consider the higher configurations. But the stand is just plain ridiculous. And even more laughable is the fact that the VESA mount point must be purchased separately for 300$ if you want to use another stand. I just don't understand how Apple can get away with this, this is the exact opposite of "premium", it's a cash grab ! FFS it's something you'd expect from a budget company like Xiaomi, not a deluxe one ! And just so you understand, companies have no problem paying for gear if it is actually useful (for instance the computer, the screen, the tablet, ...). The stand isn't even serviceable, how could it be worth it ? Seriously, you can get the more expansive stand reviewed on this video and their stupid VESA mount point for less than their own stand and it has a vastly greater range of movement as well as a slick look. Which makes me think that most company will not buy the stand but just the VESA mount since they probably already have perfectly functional and better stand around.

[@mattivirta]

apples have ALL ower price and not good and not normal human parts anythink, only totally big idiot buy and use apple stuff.

[@nixklon3278]

A LOT CHEAPER

[@FinSkater17]

@@azmah1999 The mac pro is very overpriced for it's performance actually. You can build something that performs better yourself for cheaper.

[@MrWildwerewolf]

And there are chinese northbuyou (or smthng like that, don't remeber how it's properly named) stands. They are equivalent to ergotron (probably made at the same factory) and way more cheaper. So, IMHO, ergotron is overpriced marketing sh.. Oh, sorry, I mean product. Overpriced marketing product.

[@Rocksteady72a]

I've been using the VIVO arm for 2 years now. Was scared to have my monitor held up by such a cheap product, but it's been very reliable. Definitely recommended

[@erikirelan2027]

are you extending it to the side or just leaving it in the middle?

[@Rocksteady72a]

@@erikirelan2027 To the side.

[@erikirelan2027]

@@Rocksteady72a okay good i just ordered it

[@terencejay8845]

Having used a 24" monitor with a height, rotate and tilt stand, I've just bought a 27" Iiyama with a basic stand. I'm surprised how low it sits on the desk. Would suit the eye line of someone 5ft 6" maybe but at 6ft 2" needed a monitor arm. I went, through necessity, with a cheap £20 one from Amazon that had excellent reviews. Was heftier than I thought it would be for the price. The issue isn't with the arm but with the desk I'm using: a metal framed one of 25mm square tube, with a 15mm top. So it needed a little fettling with a strip of wood screwed to the frame to give me a decent surface for the screw base. But it works fine. The height is now perfect. I don't see how spending more would benefit me. Thanks for your review.

[@RackaApps]

Apple XDR Display Stand: Hold my VESA mount

[@noshit1128]

Comedy cemetery

[@your_average_cultured_dude]

$200 vesa mount adaptor*

[@casianreport3318]

garbage : )

[@Youtubeuser1aa]

Crickets

[@Kokinkun]

For anyone looking to vertically stack 2x 34" Ultrawide monitors, I recently bought the $300 Ergotron LX Dual Stacking Arm (Tall Pole) and is considered the best for this type of application. I've used the cheap $25 basic arms and $70-100 spring loaded arms, but nothing comes close to the Ergotron arms in terms of build quality and how well it hold a monitor's weight as well as range of motion. If you're using multiple $700-1000+ monitors, it is worth investing in an Ergotron stand.

[@stabbymeowkins]

Its been two years but could you link me to that? I want a 24" Monitor on the bottom and this monitor on the top. I don't see it for $300 either. Just the single arm one is $300.

[@Kokinkun]

@@stabbymeowkins also as an update, I now use dual 38" Ultrawides and the LX arms can easily hold them up

[@chrisvenn]

Ever since I watched this video about 8 months ago I've had this monitor arm on my mind.....well today it arrived and all set up with my ultrawide and its great. Thanks for the video.

[@tomdaoust]

Good job. Short, concise, factual. Great demo of features. Thanks for sharing.

[@zarblitz]

Considering the Ergotron apparently has a weight limit of up to 42lbs, it seems like a great choice if you have a very large and heavy display. If you're going to spend $500-$1200 on a display, an extra $300 for a solid monitor arm doesn't seem like a bad idea.

[@MatheusPratta]

I currently use a dual monitor arm that looks a lot like the last one you showed, the ELG F160n and it holds up pretty great. It even includes two mount options on the table (both clamp and thru-hole) so one can install it on a very large table with no problems, and it's pretty cheap too ($80 or so)

[@CampusMania]

Link?

[@qseep]

Very nicely done video! One thing to point out is that if you have a motorized sit/stand desk, then you have to adjust the monitor height every time you change position, so it's worth spending more on a monitor arm that can be constantly repositioned. By the way, your 49" monitor is wider than my entire desk :D

[@fredastaire6156]

Hey David! Thanks for the info on the different mounts. I’m actually considering getting the Amazon one with the wall mounts into the wall studs. This video helps a lot!

[@K3S01L2]

I can really recommend Dell's own spring loaded MSA14 monitor arms for those who use Dell or Alienware monitors. Its relatively cheap by costing 130€ and it holds my Alienware AW3418DW curved gaming monitor very good. It also has internal cable management system which makes it super neat setup so no loose cables hanging around your desk. I also have Dell U2417HA as my second monitor in vertical position beside my main monitor and it also came with its own smaller monitor arm (you can also get it with a normal stand if you like) although its movement is a little limited because its one arm design versus the bigger two arms design. But one of the greatest features in of both those arms is that they do support Dells own quick connect system instead of vesa mounting. I believe you could do vesa also but these are tool less install and very quick and easy to do yourself. You just click them into the arms head and you are good to go no screws no tools super nice and sturdy way to mount your monitors. And like I said I am using Alienwares gaming monitor with my Dell arm because Alienware is own by Dell these days so they do share the same mounting system.

[@dbibbyma]

Great info dude. Just what I was looking for. Going with the $25 options

[@dbibbyma]

My arm arrived about a week ago. Working out great. I love it.

[@Doxsein]

Darrell Bibby Are you from US or Canada? I’m from Canada and it’s about $54. Still considering it though.

[@gracelandtoo6240]

Beautifully filmed & helpful video, thank you!

[@fieriko5808]

"ZA WARUDO" is the best stand

[@rahul-qm9fi]

Nah it's sticky fingaa

[@9VK7]

D4C

[@Ender275]

Gold experience requiem

[@aronjoy23]

lmaoo

[@BobFrostV]

Enjoyed this comparison video. Have been using the Amazon Basic Single Monitor Stand for both of my monitors for a couple years now. It's wonderful having 9.25 inches of clearance under my monitors to gain additional desk space for what ever I want. I searched hard for a premium option that was as good as the Amazon one but I couldn't find anything that raised the monitor as high. No regrets though even though I'd have gone for that $300 option. Some advise for perspective buyers of the "AmazonBasics Premium Single Monitor Stand"; my 28lbs monitor is close to pushing the maximum capacity since even a very light push downward lowers the monitor from the maximum height setting. It holds fine over time but just a little warning :).

[@M_S_M_86]

My wise counsel after years and years with monitor arms: always buy a wall mount. Of course that it is more work and effort, but in a long term it's a win-win.

[@SpecialEllio]

why?

[@enterthehyuver4747]

@@SpecialEllio unlike the deskclamp the wallmount is more stable because it's directly screwed to the wall, but it's definitely not for those who want to use standing table or for those who want to change position of their desk setup every now and then though.

[@M_S_M_86]

@@SpecialEllio they are much stronger as they are fixed to the wall; also, for example, if you touch or push the table with your hips accidentaly, the monitors or the tv's you have attached to the table arm support will eventually move and loose its horizontal position. I work as a day trader with 5 monitors, so you learn quickly those tips. :)

[@847MicRoss]

@@M_S_M_86 I move my desk to much to mount it to the monitor to the wall.

[@M_S_M_86]

@@847MicRoss Obviously, if you move your desk frequently, then it is better to mount it in an arm desk. Look, my humble opinion based on years of experience is that if you have a desk and you don't move it around as the colleage above, and you are one of those who want perfection, or prefer to do things better despite the extra work, the wall mout is much more worth. My opinion.

[@Dragon211]

if you're using your TV to use as a display for your PC a little hack is to buy a small desk to put the TV on using the stands then put your main desk infront of it.

[@tjyuy9685]

Thank you for making this video I was having a hard time finding a arm for my monitor. Think I'll go with the $25 one

[@mobarakjama5570]

Ergotron: a $300 monitor stand is expensive, maybe we should cut down the price a little bit. Apple: hold my apples.

[@equalinfinite]

I ordered a Best Stand, spec said it could do 25Lbs, It couldnt even hold up my 13 pound 27" display, and would drop down 70%. Sent it back., it cost $80 too. Hope this helps someone...

[@bo55playz-gamingmore71]

A bit late but many stands have adjustment screws that increase the tension depending on how heavy your monitor it.

[@senyorlimpiogaming]

This made me realize that I am probably going to set an arm once and never move it (a lot) again. Perhaps just an upward or downward tilt every now anx then. The basic mount I think will be enough for me

[@jedinator3000]

Can you please recommend a monitor arm for a portable monitor(Asus MB14AC) it only has a 1/4 inch mounting screw hole, so I guess those standard arms with Vesa mounts won't work.

[@avankm774]

I've been looking for a good monitor arm that will hold a 49 inch display, thanks for the video.

[@rob7xiv]

Ask your Local Electronic Market.

[@jab9618]

apple's 999$ stand

[@rob7xiv]

@@jab9618 you don't need to sell your soul for a monitor stand. every VESA Norm Stand is ok.

[@LevusWorkstation]

how about a gaming cockpit that will hold your 49 inch monster? levus.co

[@SreenikethanI]

@@rob7xiv they're joking

[@lanceraustin]

Dude, this is how it's done- thank you

[@Jakey_1]

I just bought a ErGear Single Monitor Mount Stand for $26 and it had all the features of the $100 arm. its amazing

[@KarQ]

NICE

[@bujurocks8188]

its karq the ana main!

[@kennethshen7265]

Yeah

[@Chrome3695]

Bruh

[@irho0]

When you browse monitor arm video and found comment from one of top OW youtubers

[@laurabrown6977]

In Modern Living Room Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/

[@damienhull6497]

Thanks for this. I've had a hard time finding a good monitor arm. Going with the Ergotron HX monitor arm.

[@cmcmanus1974]

Awesome arm, i have an HX dual at work and the ergotron LX dual direct at home for my gaming/work set up

[@deanwilliams433]

I have a AVLT Single 13"-43" Monitor Arm that is as good as the Ergotron that costs twice as much. Don't buy into brand name hype.

[@LazyTacoProductions]

It’s worth noting that 2/3 the arms in this video are ergotron. The Amazon basics arm is a rebadged ergotron LX

[@qolumbia3536]

This guy is the type of guy to watch one set up wars video and rearrange their whole desk setup while also making money off it, amazing entrepreneur.

[@clickbait1836]

I recently bought the $25 one for $15 but I can also tilt my monitor

[@pratikpatel1631]

Do you remember what it's called?

[@ojazzista]

I have the Ergotron HX for a Odyssey G9. I had to import it because they didn't sell it in Brazil. Worth every cent!

[@ShapdCrusadr]

Bought a 55" wide gaming desk that includes a dual monitor stand that claims to support up to 32" monitors weighing 18 pounds. Don't have the desk yet should be here sometime within the next 2 weeks. I am well aware the top of the desk is made out of particle board. Might take the tip from this video and use a piece of wood under the desk when clamping on the dual monitor stand. But at least the desk includes a mousepad that covers the entire desk.

[@ChibiQilin]

I love the look of ultra wide displays, but I find that vertical displays tend to be better for productivity especially when it comes to things like coding, so rather than spending a lot on one heavy duty arm for an ultra wide display, a lot of people might find it better to spend the same amount on multiple cheaper arms for multiple displays of different orientations.

[@WhiteoutTech]

well the thing is that you can split up ultrawides into two sections so it looks like you hve two monitors without a gap between them :

[@Senpho]

I want to know whats your desk ! The size seems just perfect !

[@bjre.wa.8681]

I work in a office where some of the employee have to have a mount to rotate 90 degree for portrait position. You didn't show that with any of your styles. You only gingerly rotated a small amount

[@tpye_volt2310]

idk why but I find tech videos so satisfying

[@dicksplat2049]

Loving the presonis eris speakers. Good choice!

[@SakamotoSan28]

I don't even know why I watched this video, I only have a laptop lol

[@HuanuoOfficial]

Then a laptop stand for your laptop

[@LevusWorkstation]

or an entire cockpit that holds your laptop levus.co

[@JohnVincentLabatastory]

Thanks for the video. It helped me decide which mount to buy.

[@HEADWiG87x]

I bought the Ergotron HX with the Heavy Duty Bracket for my Odyssey Neo G9. Absolutely worth the price. Nothing better out there.

[@MarcoCarpinella]

That 49" monitor is HUGE. I love it.

[@Brakathor]

But I DON'T know what to do though... One time I took a condom out of the package and it shot up and hit me in the forehead. :(

[@jeremymolina]

You're using condoms in the wrong head.

[@cvttx3585]

@@jeremymolina PPPPSSSSSSHHHHH

[@nateel86]

@@jeremymolina lol

[@ilikelobsters.2376]

Wrong video

[@leethetoad3273]

I- what

[@stephaniepearce3130]

Thanks for the vid. I have a CRG9 and definitely don’t want an arm failing on me! It’s pretty heavy and the Ergotron looks fantastic! Think I’m sold!

[@squiresean]

really good presentation. nice and clear and has helped me make a decision on which monitor arm to go for. thanks.

[@studionulzevenzeven5188]

david: i need widescreen Dell: Yes

[@v4mp1r3-]

that whit one costs way more than my both monitors combined too lol 🤣

[@Fenixflightfr]

Yo ty so much I was scared that my monitor would tumble over but now I’ve found it wouldn’t

[@straysheep5312]

I got a free 144hz monitor from my brother's friend, but it came without a stand. Just went with the EVEO arm for $60. Holds my monitor's weight and latched it to the corner side, giving me more legroom on top of my table. Definitely recommend it for those trying to get something less than $100.

[@issasecretbuddy]

for the bottom tier monitor arm, I’d highly rec monoprice. I got mine for around $30 on sale and it’s got the full range of motion of more expensive ones

[@reiverdaemon]

This right here folks. The piston ones they make are so smooth.

[@iverefiner2738]

I know two people who also say "compacity" instead of "capacity."

[@fancystacy]

complicity

[@jragadio]

He said it twice in the video!

[@hughhefnerd6751]

I work in I.T at a hospital. those 300$ spring loaded stands need to be adjusted (retightened) every 6 months with heavy use, and tend to last about 3yrs 4 tops in our environment before you can no longer tighten them down again. Again that's with heavy use, hope this info helps in some way.

[@jackberry7441]

Brilliant video! Simple and straight to the point!

[@dallasearl5298]

Apple: oh well ours has “special features”

[@macxis5371]

Hey man, thanks for the review, very interesting. How are those speakers, I was thinking about buying them, would love some insight on that. Cheers

[@AA_OnTheEdge]

bought a Ergotron, which the Amazon Basic Arm copied from, back in 2010, still working flawlessly.

[@rearsightapex]

Ooh! Glad I saw this. I was debating on whether to get a 38 ultra wide, for an arm, then I saw this. Now I'm going for that the 49inch and that Ergotron HX. Thanks for posting this, especially about the how the arms support the weights of the monitors.

[@mostlymessingabout]

16:9 used to be "wide"... those were the days

[@x87alpha1]

when monitor arm cost more than your arm.

[@Geomungus]

Pain

[@pablobutler1884]

I have to ask, where did you get your desk? I love it! Looked through the comments but it doesn’t look like anyone’s asked yet.

[@dedpxl]

Someone did ask just before you haha. I agree though nice desk. Probably very expensive.

[@rde_tyt_dpbih1121]

I bought a North Bayou F100 for $ 33, it is perfect in quality. She has all the twists and turns of Ergotron

[@envadr]

Good quality video, no bragging, very informative. Like!

[@sebastianusami]

"if you have the cash", if you have the cash for those monitor pretty sure you can swing a few bucks for a nice mount.

[@itIsI988]

Haha "swing".

[@jaybee0507]

Sebastian, well even though some people can afford those monitors, doesn’t really mean they prioritize a monitor arm very high? There is always something else you need to buy and everything in life have expensive options. EDIT: Ah, shit. That was a joke.

[@joealle1]

I VIVO double with 2 monitor holders. I find it helpful. it gives me more space on my desk.

[@pudgysquid817]

Awesome. I would love to see a review of wall mounts for the same monitors.

[@chaosinacan_3]

When a monitor Stand costs more than your setup 💀

[@fullsleevetats]

Great video! That Dell 49" monitor looks great, but it's vertical resolution is nearly half of what a 4k monitor has. It's horizontally equivalent to two 27" panels, but vertically equivalent to half of those same panels. For someone used to dual 27", 4k monitors it would be a significant downgrade. I'm stuck using a dual-monitor arm so I can get the resolution I need for day-to-day work, development, team integration in my visible apps. I still have to use virtual desktops to fit all of my apps in on a workspace larger than monitors can accommodate. Dual-mount arms still have a long way to go, to compete with some of the better single-monitor arms. I do wish the industry would manufacture arms that had an articulating _bottom_ arm, instead of fixed. It really does limit your flexibility in panel placement, especially when using a portrait orientation.

[@SuperAwesomeCloudMan]

I personally use 2 single monitor arms for my double monitor setup. Had an okayish dual mount setup, but it was a challenge to get both monitors setup in a comfortable position for work, gaming and whatnot. Ive found that 2 separate arms make it alot easier positioning both monitors, as well as much more adjustable, aka moving one monitor doesnt mean I have to move the other to some strange position to accommodate it. Downside is of course having a second arm, might ruin the looks for some people.

[@MrMuppetbaby]

Thank you David great reviews! I picked the Vivo one you suggested. Tod

[@Herwees]

The Amazon basics one shown here is actually a rebranded ergotron lx sold at a discount. A very solid choice

[@jons2]

new aspect ratio: 1000000:10