How To Remove Stuck Nozzle From Garden Hose-Easy Tutorial

In this video, I show you and tell you how to remove a stuck nozzle from a garden hose. Many people put a spray nozzle on their garden hose and can't get it off so they simply keep on using it. But the truth of the matter is that you can probably remove the spray nozzle with the help of some tools that you probably have in your garage. All that you need is two pairs of pliers and some elbow grease to get the nozzle off. I show you exactly how to do it throughout the video and go over an easy set of instructions to follow.
CONNECT WITH ME:
Instagram - / mikechimmy
SUBSCRIBE TO MY CHANNEL:
kzbin.info...
FREE DIY ADVICE EBOOK:
gumroad.com/l/...
Disclaimer: Some of the links in this description may be affiliate links. All opinions are my own.

[@floraandfaunab8855]

Thank you so much, spend an hour how to take it off, then watch your video and it take less than a minute. You're my hero for the day.

[@alabamaflip2053]

Thumbs up because you are a good honest guy that happens to also be helpful.

[@joedebellis6576]

My husband could not remove it with one plier. I saw your video and it worked using the two pliers. Thank you for sharing.

[@jacquelinejones1529]

I am a single woman, I could not get my old nozzle off the g hose, I worked on it for like 30 mins did not have the proper tools, HOWEVER, COME TO FIND out I was twisting the wrong way. I did c c wise and it came right off...THANKS SO VERY MUCH FOR THIS VIDEO SAVED ME $65 from buting another g hose.

[@leannebraden8711]

Thanks a million!!!! It worked!!! I had tried that before googling but I didn’t realize that channel locks are adjustable! Haha. Learned something new. I had to adjust the channel locks a few times but then it came right off. Thanks again for making my day a whole lot easier! 🙌😊 Have a great day!

[@savvyrb]

Thank you for this! Made my life easier ❤

[@frankprezio658]

Nope! Tried hot water, WD 40, all sorts of pliers. Still stuck. Video looks to be brass on brass fitting. Nozzle is aluminum. Probably oxidized. Any other suggestions?

[@anthonysmithcooking8873]

Cut with a pvc pipe cutter and put on a new end on that hose

[@ashemira4816]

Same with mine

[@ashemira4816]

@@anthonysmithcooking8873 I’m gonna try that.

[@blueoak6550]

Same :-/

[@otterlymarye]

Ay ya! I need a pair of channel locks AND a better sense of which way is COUNTER clock wise. 😂Thank you sir. Off to the hardware store I go!

[@raymondchong1607]

Finally removed my nozzle today. Thanks!

[@ElizaBeth-wn4dr]

Thank you! Great explanation and simple, clear instructions. The spray nozzle grip had broken apart on the garden hose. I couldn't remove it using one pair of channel pliers. Using your steps I was able to remove it and install the replacement nozzle.

[@kaiwei_life]

2 pliers and counterclockwise. Thanks.

[@fraserhawkins4462]

The metal collar of the hose is twisting and loose inside the metal head of the hose, so I can't get any traction.

[@LoriAnneBrown]

yeah have been trying that for 2 weeks and it doesn't work. Tried soaking it in clr, spraying with wd40, cannot get it off at all.

[@waynelynch3862]

Hose company suggested CLR to me. Did that work? His plier method CRACKED my nozzle. I tried WD/40 and Silicon Spray but still no help.

[@YassamanFarmani]

Thanks! Worked perfectly

[@cherylevans368]

It worked! First tried WD40, then channel lock and pliers. Nope. More WD40, then half a pot of hot water, then half a pot of ice water. Still took a bit of struggle but it came off! Thanks!!

[@JamesJones-ql3kr]

Didn't work, actually mangled the male end. It's badly corroded.

[@mdolanot]

Nope, didn't work. Now what?

[@magalissantiago2817]

Looks great will try.

[@HusaMusesOn]

This worked! I’m so thankful for you!

[@JohnBishop-i7g]

Yeah, but what if the nozzle is really stuck not kind of, sort of ... girly stuck as in your video?? I put the end of my hose into a bench vise and then used vice grips as tight as possible in the nozzle and it won't budge. I remove a little metal with the vice grips but that's about it. Sprayed plenty of WD-40 and still no luck.

[@anima89x]

Worked for me! Cheers

[@waynelynch3862]

This method CRACKED my nozzle. Anyone know what will LOOSEN the nozzle? I tried WD/40 and Silicon Spray but no help. FYI- In the future, use Plumbers Tape. That tip from Apex Hose company.

[@Cbritt_3]

Thank you!! So helpful!

[@stephenbauer9086]

It worked. Thanks!

[@mradelphi02]

It worked! Thanks!!!!

[@VirginiaBeaudoin]

Our water is so hard we can’t get the nozzle to even twist. Tried Plies and Chanel lock, . Nothing works

[@trapstr09]

Thank you worked !

[@Covidsucks21]

Wish it would work this good for my stuck on/off handle under my sink!! #HelpfulDIY

[@georgeschlaline6057]

2 pairs of pliers?

[@barbaraquinlan5518]

Have that problem - can’t wait to see if it works

[@ginoXcaron]

Tried this already lol

[@georgeschlaline6057]

Thanks Mark now I can sleep

[@keepsake08]

Thanks, I just tried this and it worked....

[@2PGHphx88]

What if you don't have the 2nd wrench?!

[@bikebum2006]

Nope, still on there.

[@marcussutton884]

Same

[@elliottlee4488]

Worked how come I didn’t think of this ughhhh😅

[@rashodbrown7303]

Worked like a charm!

[@sammyday3341]

Excellent! Thank you.

[@kellinovak6619]

Thank you! This just saved my sanity lol 👏😂

[@genes.3285]

A good video. However, my nozzle has a rubber grip. I decided to live with it being connected until the nozzle develops a problem.

[@Jade_902]

My nozzle is like baked on there 😂. White corrosion all over it. I’m just gonna throw everything out and hope for rain ☔️

[@Jade_902]

Actually, I did end up giving this technique a try and it worked!

[@hc_2323]

Still stuck! 🤦🏽‍♂️

[@otterlymarye]

Welp. After a little cussing and a few prayers to the garden gnomes, i got that nozzle off. I can NOT believe how tight it had gottrn after only around 6 weeks max on the hose. For me this technique worked, and I'm now the proud owner of a functioning sprinkler for the garden.

[@RFreed-l7t]

Aren't you turning the nozzle clockwise?

[@KirkKohler]

I know, looks clockwise but is counter. Right tight. Left loose. It depends if you are looking into the hose. It's counter clockwise. If you are looking from the side and hose is facing away. It would look clockwise. It confused me too.

[@EnigmaticAnomaly]

I'm hear to tell you that this doesn't always work. I have a spray nozzle that refuses to budge. Applied WD40, used the wrenches ... nothing. It's almost like the two are now fused together. And the nozzle was only on for a few months.

[@sp00f34]

Doesn’t work

[@mikemorose7031]

My shit is SUPER stuck! I was already using the same method demonstrated on this video before watching it, and no amount of lube, sweat, profanities or ball strength worked. (They said lift with your legs. Not your back, but what they don't tell you is the purest form of man strength comes from your balls!) 😄 and I put all of my balls into trying to remove this piece of shit! 😒💨 Fml! The only thing I've accomplished is twisting to the point the metal gives and rounds. I think I'm going to try letting it sit in a bucket with warm water and CLR. If that doesn't work. I guess I have no choice other than to cut the end of my hose off and replace the fitting. Which is pretty cheap like 5 or 6 dollars maybe 10 max. Good video tho.

[@markbergen3125]

You squeeze pressure on the nozzle where the threads of the hose are your tightening the grip, ahhh common sense

[@FrankHall-t8k]

63399 Sonya Way

[@MarleneRankin]

Thanks, but you could add an example of when someone put the nozzle on “crooked” -if that makes sense. But I’m sure your explanation will do the trick.

[@jdjack68]

Yeah no shit it wasn't stuck...not helpful

[@mrsticker2]

Tried it. Still Stuck. Here's another solution. kzbin.info/www/bejne/aV6waqqrqtOLg9U

[@charlesdarwin180]

I'm trying some WD-40 now.

[@LaurieSmoot-rq7jc]

He is turning the sprayer clock wise