Hendrickson Rear Suspension | Walking Beam Bushing Replacement

[@chadharmon5716]

Everything this man does is for a specific reason very talented

[@JohnnyCarroll-wi6tx]

another quality job brought to you by semi workin.

[@randallyarborough7923]

Worked at spring shop many years ago where we did several of these jobs a week. I always tried to be busy doing something else. Heavy, dirty work. The shop went through air tools and impact sockets like crazy. Too bad he didn't show the press used to remove and install the bushings...its massive.

[@tomh894]

Isn't that what is around the 8 minute mark?

[@Cris_V_00]

Very interesting to see the process of this repair, thanks for sharing.

[@kevindavis3004]

In the early 80's I owned a shop that specialized in truck suspensions, We guaranteed Hendrickson rebush in 2hrs or less. Average was 3 jobs a day with 2 men. Life was good.

[@kunu98]

Is it me, or does this look fun and kinda relaxing to do

[@simcoespring]

If you want to see a difficult one, watch my video coming out on Friday July 23rd on the old style walking beam bushings. It did not go well.

[@jonathansnyder7926]

@@simcoespring yeah the oem ones that don't move are a pain the the bracket not the washers

[@farwest571]

Got to love walking beam....best off road suspension in my opinion...mabey not the smoothest ride but hey its a water truck

[@SemiWorkin]

Thanks for watching!!

[@ralphphillips6422]

This video was very inspiring. Great work

[@SemiWorkin]

Thanks for watching!!

[@sethnonya8566]

So glad I found this video have exact same suspension needs same job done

[@annecrompton918]

That takes me back when number 1 tool in my box was a big hammer and number 2 tool was a bigger hammer 😂

[@SemiWorkin]

Thanks for watching!! Got to have a BFH!!

[@joseywales2037]

no 1 tool hot wrench no2 bfh haha

[@loganellis5449]

Dang you make it look easy! Will be replacing mine this winter I’m hoping it’ll be as easy as you make it look haha

[@SemiWorkin]

Thanks for watching!!

[@hectorrodolfotorresdelacru9194]

@@SemiWorkin )767

[@mapacheraccoon4476]

GREAT VIDEO.......THANK YOU FOR POSTING...

[@jerrykinnin7941]

I use to run a concrete mixer with the hendrickson suspention. Very stable. The dumptruck i ran had the walking beam with the springs. Also very nice. The best part of a walking beam suspension is one less air leak to find. Dual lockers a must.

[@SemiWorkin]

Thanks for watching and commenting!! Good set up and low maintenance.

[@ODD31music]

@@SemiWorkin I like working on walking beams theres just a little weight to them aha. I work under a pit. Awesome video!

[@504ihtractor7]

Is this suspension softer than a mack camelback suspension?

[@mrb4342]

Friend I am a new subscriber and Although I know you do not speak in the videos I want you to know that I love your videos very Especially the videos of the suspensions of the trucks Many congratulations

[@rbwoodwork1890]

I’ve done so many of these it made me tired just watching!😉

[@Drivehead103]

I wish you was nearby, my 96 Peterbilt tandem dump truck need walking beam bushings replaced and most mechanics where I live don't have a clue what they're doing.

[@evanalhashimi426]

how many ton does this press work in? thank u nice video

[@johnwaby4321]

Nice job . Looks heavy work 👍👍

[@SemiWorkin]

Thanks for watching!!

[@timmayer8723]

Worse than the walking beam suspension system are the leaf spring or massive coil spring suspensions. The work then becomes deadly in some cases. Had a coil spring jump from its hold down clamps and penetrate the shop wall about 12 feet away. All in about two seconds. I was trained to NEVER expose any body part to a spring under tension. That advise paid off.

[@helderhenoch3698]

Boa noite daqui de Portugal gostei do seu vídeo parabéns muito profissional obrigado Hélder Henoch

[@withinthishour]

How did you keep the axles from moving?

[@blacksmoke5009]

If those beam bushings were that bad I guarantee the tower bushings are shot too ! Nice job thanks for sharing!👍

[@SemiWorkin]

Thanks for watching!!

[@jordanstaal01-107]

The cross tube that connects to both walking beams, is it supposed to move side to side?

[@drewwashbourne8547]

How did you reinstall cross tube with the open side of the center bushing facing outward?

[@Masteruhfnon]

sweet how many miles were on that

[@justinbustin677]

Caveman suspension. Pretty much similar to a equalizer type setup on a trailer.

[@nevilepreston3002]

Just left work uy

[@harjot461]

strong suspension better than today's weaklings

[@justinbustin677]

@@harjot461 strong yes, beat shit out you MMMM ruff ride mmmm

[@edgarmarquez3785]

👍 good job

[@mohammad4413.]

خیلی هم عالی ❤❤

[@ameehasa5504]

Can you make video for all tools that you use like the press others thank u

[@SemiWorkin]

Thanks for watching more videos to come.

[@shaunharman2588]

Hi ned to replace my bushings, would you be able to give me part numbers for bushings please .I am in the UK so could you let me know your supplier if poss. Thankyou

[@moesammour1865]

Can we swap camelback suspension with haulmax for mack truck 46k rear .......can u do trunion stand replacement for camelback suspension using the after market GAUMER INDUSTRIES trunion stand

[@deepsouthoutdoors5737]

What ton press is needed? Thanks

[@ЕвгенийРыбников-з1э]

Отличная работа профессионала. Спасибо Semi.

[@antiputing]

Это не его имя

[@inglebertogomez1883]

Buen trabajo desde colombia se podrian suprimir los golpes por otro tipos de herramientas

[@James-Prinsep]

Hard work

[@SemiWorkin]

Thanks for watching!!

[@deborahchesser7375]

Definitely one of those jobs where you donate a little plasma lol

[@andrewroberts553]

This guy is that good his optimus primes doctor!!!!

[@SemiWorkin]

Thanks for watching!!

[@jaimesuarez7249]

Amigo de cuantas toneladas de presion es tu prensa??

[@KBFishing-xl1jw]

Cool stuff

[@davidherrera7086]

What’s the torque specs for those bolts ?

[@LmanTrojan1212]

Why do you leave a jack under the driveline?

[@thehammermanduke]

Good stuff

[@johnb1121]

The hand truck an actual tool or did you make it???

[@SemiWorkin]

Thanks for watching!! It’s an actual tool it’s very old and I don’t think they make them anymore.

[@johnb1121]

@@SemiWorkin can you do a video of it so I can maybe find it or make 1 please thank you

[@chrismcdade5017]

It looks like a hand truck to stack feed bags like you would find at a farmers co op. It’s at an angle so the bags don’t fall while your stacking them onto it

[@MrArchasit]

work hard !!

[@satpalsidhu1236]

How can we diagnose we need to change the walking beam bushing.

[@SemiWorkin]

Thanks for watching!! Easiest way to tell is when you turn the truck the back axles move side to side.

[@joshuawilson6900]

Nothing wrong with a good old automann socket cheap yet durable

[@ameehasa5504]

How much the compress pressures please?

[@simcoespring]

it takes between 75 and 100 ton press to remove and install the bushings.

[@زيزؤ-ز9د]

_سيّد الإستغفار: ‏ اللهم انت ربِّي لا إلـهَ إلا انت خلقتني ‏وانا عبدك وانا على عهدِكَ ووعدك ما ‏استطعت ، اعوذُ بك من شرِّ ما صنعت ‏ابوءُ لك بنعمتك علي وابوءُ بذنبي ‏فاغفر لي فإنهُ لا يغفرُ الذنوب َإلا انت💛💫.

[@antiputing]

Парень, ты ошибся дверью, тут обсуждают гаечные ключи и методы их использования

[@cat-cambodia1801]

good

[@SemiWorkin]

Thanks for watching!!

[@rmdhndwi]

Why you turn the nuts on and off before taking it off?

[@dwightg9817]

Sure wish last one I did went that easy

[@johnnyholland8765]

Those things were really shot. Thank goodness for a good impact wrench and a good hydraulic press. I take it you may have done that before...

[@SemiWorkin]

Thanks for watching!! One of the worst ones I've ever seen.

[@jonka1]

@@SemiWorkin I had one where the pins were cutting into the beam ends. Welded and ground it and it drove away.

[@elisioeudes6288]

Expcional!! Tiro o meu Chapeu pra vc guerreiro!.... 🤔😃😃👏👏👏👏

[@jonathansnyder7926]

I like those atros

[@jimmylamar9118]

Charm suspension system

[@KarinasRoblox]

the sound of the impacts soothes me for some reason.

[@SemiWorkin]

Thanks for watching!! Sometimes it gives me a headache.

[@omarkuika]

i want a job like that

[@SemiWorkin]

Thanks for watching!!

[@franciscolorenzana9330]

Muy buen trabajo 👌

[@javiermejiaef808]

Tengo taller en Colombia, a cómo cobran el cambio de los 6 bujes. Muy buen video también hacemos el mismo trabajo y también reparamos los troques traceros.

[@oscarrojas8386]

Amigo disculpe mi ignorancia como se llama ese tipo de suspensión y si se le puede adaptar a cualquier tracto Mula estoy armando un Mack r600 le agradecería si me colabora con eso soy de venezuela

[@antoniobraganca3141]

👍👍👍👍👍👍👍👍

[@SemiWorkin]

Thanks for watching!!

[@олегвладимирович-п1в]

классно!

[@сергейданилов-р7ш]

хороший гайковерт

[@patricioaguayo9088]

Thats what im talkin about

[@SemiWorkin]

Thanks for watching!!

[@hddm3]

I always hated doing the puck ones. Bolt in arnt to bad. But still suck

[@SemiWorkin]

Thanks for watching!!

[@franciscosouza4216]

👍👍👍💯

[@dimonfil6385]

Нифига не понял, а как тут подвеска работает? Где подушки, ресоры, пружины? Как она работает?

[@antiputing]

Эта подвеска для особо тяжёлых грузов, самосвал, лесовоз и.т.д

[@PETROLEGOVICH...]

Как на телеге, позвоночник досвиданья

[@loganbrown4654]

You should talk and communicate what you are doing and why in these videos. Would be way better

[@Sjanzo]

With suspension as primitive as this, its no wonder American truckers like to sit in the middle between the axles.

[@AliYilmaz-vr1jc]

Insan 100000bin Stück tanecik

[@Buddha-eb5yl]

I think the Truck neds a Wash the Rimms also 😳😬😮

[@SemiWorkin]

Thanks for watching and commenting!!

[@mybestieischloer2401]

the method behind the madness.

[@AliYilmaz-vr1jc]

Naki siz hitck kentinize iki bayragiffa acmadan olmaz de

[@hernandogonzalezarredondo6354]

Porque que siempre hacen un trabajo no asean las piezas que arreglan montan todo nuevo en cima del mugre ...buen trabajo pero con mugre que tristeza hacer videos

[@oscarrojas8386]

Totalmente de acuerdo ☝️ amigo disculpe como se llama ese tipo de suspensión y si se le puede adaptar a cualquier truck estoy armando un r 600 Mack y quiero ver cuál me sale más rentable si la de resorte o este modelo digo cuál aguanta más trabajo y peso

[@greglechowski5030]

And this, ladies and gentlemen, is how real men (and women) handle real work… I doubt there are any college students today that could handle removing just one of those bolts with a 3/4 inch gun on one end with a bar and socket on the other . There would be nothing but whining and tears. ‘It’s too hot…it’s too dirty…there isn’t a Starbucks close by!’ WTF…

[@AliYilmaz-vr1jc]

Suradan 26 milyon tane alirim

[@hishama5289]

Spray some wd40 on all the bolts before you undo them and it will save you so much hassle.

[@SemiWorkin]

Thanks for watching

[@AliYilmaz-vr1jc]

Abi bu kaddar

[@AliYilmaz-vr1jc]

Sunuda alaH

[@AliYilmaz-vr1jc]

ArabaAutobil Geschlechter renovieren Einbrecher rein kwetchen takilin undsoweiter

[@djvoicu]

i don't cleaner.I do not understand

[@moesammour1865]

Great work plz help people by displaying contact info u can get lots of business plzzz

[@dickystreets]

👏👏👏👏👏👏👏👑🏆🎖️😷👋🇧🇷

[@wdobni]

gotta be careful....looks like lotsa ways to get hurt

[@kevinmatthiesen8961]

We don't have to see every Bolt Off and on better to show a before and after.

[@SemiWorkin]

Thanks for watching!!

[@armandoquinonez2910]

$$$$?

[@AliYilmaz-vr1jc]

Ibo gelecek gelecek ooooooooooooooo1 para getirecek

[@AliYilmaz-vr1jc]

Herr ondan 150bin milyon stück

[@AliYilmaz-vr1jc]

200000000m

[@AliYilmaz-vr1jc]

Tane alirim Klammer bagislan derim

[@AliYilmaz-vr1jc]

Su ondan 47000 bin dane

[@AliYilmaz-vr1jc]

Please

[@AliYilmaz-vr1jc]

47000bin Stück düshün je gönderin

[@AliYilmaz-vr1jc]

Evetilki

[@AliYilmaz-vr1jc]

Evetilki

[@AliYilmaz-vr1jc]

Kürt demeyin Mamma kürdülliy chipliy deyyiniz koreasstolz des bana

[@j06c]

How much does this job run