Building a very cheap e bike with hoverboard motor - easy conversion

[@hennybutabi]

Thanks for watching! Let me know what you think in the comments below ;)

[@k_szaf]

Originally, the motor is wired in Star configuration. If you rewire it from star to delta, the motor will spin from the original 700 rpm to even 1200 rpm ! That means you'll gain a lot more speed.

[@عادلخياطمفروشاتالمنزل]

wa

[@K1VV1939]

Lets assume you don't live in a very dry country and the drive wheel and tire get wet. Lets say you're Skimming to work and you tyre goes through a splash of oil of another car and you're 7 hours late to work due to drive slippage? A Design that needs some Design.

[@ELECTRICBIKEDIYLIFE]

Man I have been waiting for someone to build a friction drive with one of those.

[@mr.davidopoku6830]

Can I order this for my son

[@oneeyedrone4293]

Now time to add a front motor for all wheel drive e bike :) Those hover board motors make great donors since they can be purchased for so cheap.

[@codebeat4192]

Great subject. I think you need to add a splashback above the wheel (to avoid water splashing against your coat and to avoid something above it can hit the wheel) and a spring/tension system that follows the surface of the wheel. The spring/tension system could also you enable to temprorarily disable the wheel (take off in pause position). This idea is actually something like a Berini (1949) or Solex (1946) with a clip-on motor/engine.

[@richardlongmore9301]

Loved this project and Just what I was thinking. Yes put the motor on a hinge andI a gear-lever like a handbrake in a car to disable it

[@Buzzhumma]

I always thought electric vehicles are to quiet and dangerous but with your brilliant genius you have solved the problem ! 👍🏻😂

[@fmphotooffice5513]

Best part, non destructive solution. Worst part, needs an anti-"Isadora Duncan" shield. I like the attention to neat minimalist construction. A lot of videos have rusty half-assery and motors that won't run very long before they fail.

[@cpcnw]

Good thing about this idea is that it is completely reversible and the bike doesn't have to be altered. More manufacturers should be providing solutions like this.

[@yoyatech]

you should be able to done this using arduino, motor driver, and reverse the enable pin, but i don't know in 3 phase motor, should be the same principal and should be able But why you need reverse in bicycle?

[@alfredo-ff]

@@yoyatech he means that he can reverse the process and remove the pieces. Not going reverse on a bicycle

[@yoyatech]

@@alfredo-ff ah, sorry i'll tell you guys if i made one

[@bobshopes7099]

Better . Where can you buy precut kit ?

[@burthabard8316]

What watt size are the motors I have two smart st zing hover boards what range will the battery give and speed please I now you could have a bigger amp battery but this looks ideal for a trip around a town and light if added to a cheap fold up bike to carry in a camper van

[@madeo8480]

I built this over the summer for my kids. I didn't know someone else was building the same thing. I like your design better because it's more adjustable. Btw, the motor can handle 500w.

[@girishvadayapadath3285]

'

[@0xsergy]

make sure you add a guard. wouldn't want to see what happens to any lose clothing or whatever is attached that goes between those two wheels.

[@FIprobe]

kzbin.info/www/bejne/rZukq4qdqdtoes0 Pretty sure these will take about 1500 watts if you bring the volts up;)

[@henrlima87]

@@0xsergy good thinking mate!

[@flojotube]

WHY NOT USE BOTH MOTORS?????

[@MrBilld75]

What a totally interesting and unique build! It kind of reminds me of the old tire driven bike lights we had back in the day. It sat on the fork or tail and was a spring loaded device you could move out of the way in the daytime. But then flip it onto the wheel at night. And it was just a textured small metal wheel, that used the spin of the tire to spin itself as it rubbed on it and generated power to the generator it was attached to on your fork or tail. No batteries, just pedal/tire powered. I had my doubts about how fast it would go, or how well it would work, based on when you fired it up in the shop, upside down. It looked like there might be a loss of traction between the two wheels. But I see how your logic worked there. Once it's upright and your weight is on it, there's going to be flex in the frame and it will make the two meet perfectly. Good thinking, because had you mounted it closer, there might be too much contact and friction/resistance and reverse torque. Once you were riding it, you could see there was absolutely no loss of friction between the two wheels and perfect contact and minimal over friction and reverse torque. Just enough to drive the wheel forward solidly and it looked like any other front or rear hub or mid drive ebike. Bravo! So easy to replace too now that the bracket is built.

[@hillppari]

Dynamos arent old they are still a thing. mostly in hub dynamos tho

[@MrBilld75]

@@hillppari Yeah, I just saw the old school light dynamo devices still being sold. I guess with the resurgence in vintage stuff, including vintage bikes, they saw a market for some nice chrome classic styled bike lights, driven the classic way. They are mighty sharp looking too, very much suitable for a 1950's/'60s themed bike and is styled after the old school car headlights.

[@Therapistinthewhitehouse]

What is “reverse friction”?

[@MrBilld75]

@@Therapistinthewhitehouse Reverse torque (or friction) happens in all electric motors. It's a side effect of spinning against something and seperate from regular friction, but related. Like even the parts of the motor and fighting against itself, not necessarily an external force (although it happens with or without load). Bearings, for all that they smooth friction and movement, cause a slight resistance of their own in the motor. The shaft and the brushes rubbing against the commutator etc. That's back torque, or reverse friction/torque. The magnets in the motor also contribute to it. Additional force, against the motor basically, that friction from elsewhere cannot fully account/isn't responsble for. Slight usually, but they all add up. The idea for generators which eliminate this, is highly sought after for generators that can generate more power than you put in. The quest for perpetual motion machines, we've been chasing for centuries, that's what it's related to. Mind you, not really full perpetual motion, we've given up on that, but close to it, getting way energy out than you put in, no losses=super efficiency. And it looks like India, not long ago, created the first generator/motor, that is so smooth, it's frictionless and eliminates all back torque too (back torque was the final hurdle). The ultimate in efficiency. So reverse torque is a problem, as you can see, in that kind of situation. It's just not one you hear mentioned a lot, because unless you are creating the most efficient motor ever made, we just apply more power to the motor and power past it. It is frequently an ignored metric, except in situations of extreme efficiency. It's most noticed and an issue when dealing with efficiency. The most efficient motor (like what India just invented), would be one with no losses, one which eliminates this hurdle and apparently, they have. It would literally have to be the smoothest motor on earth really.

[@baddestmofo3724]

@@hillppari In the UK Dynamos are banned i think because they dont work when the bike is stopped at traffic lights or junctions...but they were clever little devices when i was young :)

[@supjay3945]

Thanks for the info along with the parts. Saves me time.

[@quanchyplimp]

No long coat tails! Nice job, I nearly have all the parts to do this to my old bike!

[@NWDestroy]

i love all the manufacturing of the brackets just to mount it on a 30 dollar 50 year old worn out aluminum frame, and then have hella loose clothing by the drive train haha. *not to in any way lesson your build. You got er done and made a video about it! Thank you for posting this you mad lad!!

[@dieterjosef]

Your jacket hanging above the rotating engine shold make you nervous. I think that's too close without a cover.

[@LukeSchiralli]

I only came here to comment the same 😂

[@somestuffithoughtyoumightl6985]

Where’s it gonna go? At least six inches in circumference to reach the pinch point.

[@outinthebackyard7579]

KZbin safety sallies can not resist

[@abdiels6517]

Debieras probar instalarlo atrás de la llanta trasera ya que tienes buen equipo, hasta te protegería del agua que salpica ésta. Suerte

[@TheUniversalid]

(motor)

[@ozbayNz]

U can do the same thing with just 2 bits of roughly guesing 40x40 timber screwrd to each other on the back and front frame with a wheel hole pushing the motorised wheels down.

[@NathanBennett-q3k]

Can you show us a wire diagram on how you connected the wires ? I have got the parts here I just don’t know how to connect them

[@hennybutabi]

Red and black on your controller is the power. For rest all colors should match the motor and the controller. Blue green yellow to power the motor and 5 wires going to the hall sensor

[@NathanBennett-q3k]

@@hennybutabi how would you mount it from the front by any chance the bike I have is difficult to mount in the bike

[@jlucasound]

@3:10 Butta' Finga's!! 😁 You are an AWESOME Craftsman!!🙂

[@mosesmanaka8109]

You need a mudguard to prevent water splashing up when it rains. But good job. Well done. 👊👊👍🤟

[@JohnJohn-zh4ff]

You get more splashing down the back of your legs tbh

[@dylanm.3692]

Just got done building something like this. I used a spring to pull it down. It... moves. I guess. The lack of friction is a huge bottleneck. I got some snow on my tire and now it slips so bad it's almost useless. And it's -13 C out right now so... that won't be going away any time soon. I hate this city's weather.

[@themastereal8345]

that's a shame

[@dislikecount2617]

nice , I say if the air was let out of the rear tyre while the motor was being fitted it would of helped , nice build , cheers.

[@stailee000]

I built the same last year with a 350w hoverboard motor, but forget the hoverboard batteries that only has 4400 mAh at most, and low discharge capacity cells (few km and power!), and the friction is much better on a city tire. but the most important thing is the controller 36-48v, how many amps it provides because the formula is 36v X number Amps (let's say 20 amps) = 720w at peak (it can be easily handled by a 350w motor), so choose the right one!

[@wesofalltrades]

I love your videos. Very creative. Keep up the good work.

[@SanctusAcappellaSATB]

Hi. I'm thinking to use the axle of the escooter wheel to be assembled in the left pedal axle and the other pedsl still has gears. Would that be possible to put together? Of course, locking the outer diameter of the escooter wheel would be necessary for it to work

[@hennybutabi]

That will not work because the wires are ran through the axle. So if you lock te outside, the axle will spin and will wind up the wires. Good luck with your build!

[@SC.243k]

Very professional work, Thanks my friend, Big liked

[@Rob337_aka_CancelProof]

Nicely done... Now put a small ICE on it and make it a hybrid that recharges the battery using the same friction wheel as a generator while under gas power effectively giving you an almost infinite range

[@yoyatech]

Thanks for sharing, i'll try to upgrade this project to be able withstand light rain

[@wizrom3046]

That is a decent speed! Especially when hoverboard motors are normally very slow.

[@oneeyedrone4293]

they are very powerful motors, usually dual 350W, they just reduce the speed so people dont get killed on them. You can over run them quite a bit without damage, most can handle 500W punch and then coast at 350W.

[@bobdebouwer7835]

@@oneeyedrone4293 Isn't this controller already doing that? 40v x 18a = 720 watt. That is, if the controller info is true.

[@brianasimor9402]

You have a great imagination my friend. Carry on doing what you do best!

[@tomasedson816]

How to recharge the battery?

[@hennybutabi]

I just plug it in directly in the hoverboard charger

[@parmorama]

Wow! Now that’s one cool electric motor cycle.👍

[@markuscloot452]

You could made it with a spring, that loosing profil or eggs in Tire will be compensated. So it's tight till something happens on back tire.

[@aldito35]

I order the BLDC and Bag My friend has a hoverboard ,the only thing i will be missing is the Arm that you build for the Hoverboard wheel , that goes behind the rear tire ...but im building it! inspire on your tutorial...thanks a lot...

[@terrylembke8100]

I plan on doing that , but with a motor on the front wheel too . Build a pack to put on frame 😊

[@britkasablja007]

You should make some spring system holding tension between those 2 wheels

[@rafaelalcala5958]

And free wheel too...

[@sirepanfried8641]

​@@rafaelalcala5958can you explain what you mean by that?

[@rafaelalcala5958]

@@sirepanfried8641 gracias por la réplica, me refiero a sistema ya usado hace décadas, dónde se solo aplica presión al motor, sobre el neumático cuando queremos transmisión -empuje- liberando al llegar a tope RPM del motor, alcanzar velocidad crucero, o tener pendiente negativa (bajada)... Una especie de clutch... Buscaré algún vídeo al respecto y te envío link. 👍

[@AlexT-md9df]

I wonder if you could somehow mount a cog on the motor and run it directly to the rear bike cassette. Might get more power output with no slipping

[@tylerrg8966]

Found a hoverboard on side of road today and been thinking what to do with it. I might try your idea it's brilliant

[@thkyou85]

You need gearing or at least a planetary gear setup or initial take off load could burn up the motor. Could work if in motion when activated.

[@charlesrichardson2655]

That was amazing. I road past a broken down scooter the other night getting off work, and was too tired to take it home and try that move. LOL I wish i would have seen this clip first but i,ll run across another one, and I would have tried it to make it with wood being the black Mygyever that i am I mite have pulled it off (probably only temporarily or need to be serviced regularly). GOOD JOB. I,m impressed.

[@convictions831]

Plz 🙏 how do u charge battery 🔋

[@hennybutabi]

I wire it directly to the hoverboard charger

[@convictions831]

Ok I threw mine away I can buy the connection can't i

[@1tonyboss1]

I build same idea 😃 I have on my channel I have build so many models of those different motors. Of friction drives its cool I like it

[@keyelectric91]

Solid and simple! I wonder how many amps and volts these hoverboard motors can take I'm going to say around 20a at 52v around 1000w or drill some holes in it and add cooling fluid to the magnets and it might be able to handle 2-3KW.

[@user-pavel.v]

Такую мощность с таким током длительно не может выдавать это колесо. Сгорит.

[@ArtyVanHoming]

would be interesting to know how many miles to the charge you get

[@DieGo-nl9il]

Goo job,at the moment,I am making an electric bike,I am using an overboard too Greetings from Buenos Aires

[@chaeunwoo5525]

Uff bro, si esto es lo "fácil" no me quiero imaginar cómo es lo difícil 🥲

[@rubenhernandezcervantes1643]

Todo muy bello y la ventilación para el controlador, al final también se ve q le falta protección a la rueda de impulso, ya que su ropa queda muy cerca de ella y punto extra, por la tracción entre ruedas no desgasta prematuramente al neumático de la bicicleta? Gracias.

[@naumansm3]

Cool video...I would like to add this to my existing diy electric bicycle to get more speed ? I have a brushed motor with chain mounted on the rear tire...could I use my old Segway brushless wheel motor on the front wheel of my bicycle ?

[@DmitrovskiyAleksandr]

Класс! Плюс такого устройства- этотуниверсальность без каких либо изменений в конструкции велосипеда. Минус- в дождь, естественно ездить не будешь, но после дождя, по лужам? Как будет зацеп с мокрыми колесами, ну и брызги будут просто фонтаном во все стороны. Но в любом случае, автору огромный ЛАЙК!

[@charlesblithfield6182]

Very cool project. Inspiring me to do something similar.

[@rockcrusher4636]

Super nice, thanks for sharing, I'm building one. Cheers.

[@rocco-s-107]

did it go well?

[@rockcrusher4636]

@@rocco-s-107 yes, but it was stolen.

[@Silveky]

this is acctualy really smart

[@bitzclipsmatt214]

Great job mate, just hope it doesn't rain as your rear is going to get pritty wet.

[@jlucasound]

I wasn't going to sub to any more channels, because I have so many. I couldn't resist one more. You're Welcome. 😃

[@mkltheAngel]

Great concept,now next to try it on a fat bike .,stay safe

[@outinthebackyard7579]

Cool idea I wonder if you could reduce the terrible noise it makes with a smooth street tire on the back

[@moodberry]

Only question I have is what about when you want to disengage it, like if it runs out of power and you have to pedal home?

[@michaelngan99]

Make sure you don't run out of juice.

[@jonvine2946]

@@michaelngan99 maybe carry a generator ? lol.. (range anxiety hah!..but good point..)

[@NathanBennett-q3k]

Can you make one without welding perhaps as some people can’t get a welder ?

[@hennybutabi]

I'm planning to do that, I got this remark a lot😏

[@andro7x]

GREAT! Next, make it liftable from the wheel, so you're not turning the motor when you're pedaling. And make it a generator when you're going down a hill, so it charges your battery :)

[@Mikle.Bikle18]

I thought about doing something like this with hoverboard parts. I might do it now.

[@BlackJeepConvertible]

You need a clutch so it’s not always touching the tire. Lots of power loss if you don’t use it

[@slivzzz]

It's electric

[@wilhelmbeck8498]

@@slivzzz Loss of energy - is energy-loss whether it's electricity, gasoline or muscle-energy

[@MegaTechno2000]

It only moves as fast as you wanted to move, it doesn't idle like a car engine.

[@ABCustoms]

Leuk ding zo Hendrik! En je werkplaats is gigantisch opgeknapt zo👌🏻 logo op de muur, netjes👌🏻

[@convictions831]

My wheel I took of hover board has green green connectors on ..is both wheels motors or the one battery side

[@marcopelegrini]

Nice job! A few thoughts/questions: 1 - Hoverboards usually have two motors... would that make sense here? The design would get more complex, but I wonder if we'd get more speed or if it would need synchronization as they might not necessarily run at the same speed? Probably not more range as that's more dependent on battery capacity than anything else. 2 - Have you looked at using the hoverboard controller board itself instead of a separate one? I've seen a few hacks to use arduinos... I might go that path... any tips? 3 - Would having a spring applying constant pressure be preferred than a fixed position? Not sure if that would be worse or better for the grip.

[@marcopelegrini]

This is what I was imagining for the spring mechanism: kzbin.info/www/bejne/nabZd6SYad-aeMk These guys used gas spring, which is even nicer.

[@fedeMCTV]

1 - Two motors would double the torque but not the speed. The complexity and the (slightly) reduced range (assuming that 2 motors would be limited to half the wattage of the single one) would not be suitable for street use. Maybe only for very powerful motors or offroad use. 2 - Probably the original controller wouldn't survive 48V battery and so you would get less watt output (maybe too low to be used as ebike motor but i don't know). 3 - Not my competence area, sorry!

[@dane.2010]

In the video it shows the controller having a t60 connector for the battery but in the aliexpress listing it doesn’t. I don’t know which connector it will ship woth

[@hennybutabi]

It comes with another connector. I cut it off and soldered the xt60 myself

[@dane.2010]

@@hennybutabi ok. is there a charging port on the throttle/controller or do you have to use the one on the hoverboard?

[@Lickemstick]

The only problem I see in this build is that it's rather non-adjustable. If ridden enough, eventually, you'll have to replace that back tire. You're just gonna have to cross your fingers and hope that the new tire's dimensions exactly match the old one. Great build just the same mate.

[@phashaunjackson]

Loosen the bolts maybe lol

[@hermanteunissen990]

Solex mopeds used to be popular...they had a drivewheel on the tire driven by a gas engine.

[@nicholasjordan-ol6wb]

dont the speed controller have a speed dial connector on it probley rig a speed switch on it

[@RidesInforests]

Best thing I did recently was sell my big heavy ebike for an expensive normal bike. I struggled a bit the first week as felt like riding in syrup. Now I'm in love with cycling again. Fun holiday but ultimately don't need an ebike and am healthier and happier on a human powered bike.

[@zaphnath74]

Thanks! Henny could you give this braket sketch open?

[@MisterDivineAdVenture]

Cool. That's by far the best of the friction drive systems, excepting for maybe a quick release. It's the only system that provides adequate gearing for a hill and for the motor to run cool. You might run 72 volt for 40mph without issue. Also the simplicity of drive train is excellent and looks durable as hell. Q's? Did your electronics get hot in the bag? What's spec motor / battery would you pick if you could pick anything?

[@bobikbobikowy5458]

I tried friction drive and its not that good. Burns your tire when uphill and works veeery bad after rain. Now i wanna try with chain. I put 44 teeth gear on rear wheel and need to find out some small sprocket on the motor. It might work with ratio 44 to ~10. Will see

[@MisterDivineAdVenture]

@@bobikbobikowy5458 Yep - be sure to get the right shaft size as well as the chain size. They have them on eBay for around $10.

[@tristanmcnabb2741]

Allsome work guys from cruzermans inventions 😄👍🥳😸

[@jaker7366]

how does it not slip

[@angelodonzella5231]

Ciao vorrei sapere dove acquistare la centralina per far funzionare il motore. Fammi sapere grazie

[@christiandariol5210]

Ma a fare stare fermi i pedali cosa hai fatto,xchè dato gira la catena dovrebbero girare anche i pedali spiegami grazie

[@CharlesNewkirk-lb6uh]

Intresting video!

[@jimmyramos3055]

De todos los videos que vi, éste es el más práctico, gracias por tu video, haré exactamente lo mismo. Saludos . ( Like y me suscribí )

[@Taahmim]

what happened when tyre get old? And in wet road, there is a high chance your motor get splash by water

[@edifierbass7821]

Yes i've seen something like this idea on youtube on ebike review the one I saw has a small motor compact handcarry detachable with Battery all in one piece and actually this idea was already a vintage technology I saw a video of a Gas motorcycle with an incorporate motor drive attached on the back frame close to the wheel similar to that hover board position, but the drawback would be scraping your exterior same as this one

[@nicksuegiatrakos1983]

One Smart Man :) Thumbs Up to you

[@ekkRides]

Just found a hoverboard on the verge collection. doesn’t work gonna get a controller and a throttle hope it works

[@joelstolarski2244]

Adding mine to Scwinn Beach Cruiser. Found 2 hoverboards on trash pile. One had battery. Part I'm confused on is where does the hall get connected to ?

[@hennybutabi]

The motor has 5 hall wires, just connect them to the hall connector on the controller

[@joelstolarski2244]

@@hennybutabi Ok Thank you. I have done rC brushless, i was having a Senior moment thinking about the project. Looking for a cheap welder to make my mount. 3d printed 1 inch tubing to do a mock up. The Beach Cruiser is a PITA to design mount for. Mountain bike would have been easier in some respects.

[@jamescameron277]

Yeah, looks pretty easy alright, IF you have the top machinery/tools, that is. Which most of us do not..

[@wadejump4001]

How fast does it go can you do 30 mph

[@pepopepez105]

Hello, I would put the battery separate from the control unit, since batteries do not like heat

[@michaelngan99]

Use a Heat Insulation.

[@mikefromwa]

Fantastic idea, but please put a cover over that drive wheel!

[@rage_dorritos4126]

Maybe you could put a second one as the center of the back wheel, when the top one finally accelerates you so the center motor doesn't stall, you can get a higher top speed

[@themastereal8345]

I remember seeing a different channel do this, it is actually a better idea but you have to redesign the hoverboard motor to have two sides coming out of it and also you need to get rid of the bearing that's usually there, shorten the length of the metal wires thingys going to the middle and if you can do all that, you will have a better more efficient motor!

[@manoloqo]

la llanta no se gasta mas rapido de esa manera?

[@10secTonner]

And a year later, can we have an update video, tell us hows its going if you still have it, and anybissues.

[@cdisc2754]

amazing ,only how did you made the wiring from the hoverboard at 9:54 wheel longer

[@graveddigerairsoftsniper]

Hello my friend, I'm from Brazil, I liked this project of your electric bicycle very good, would you be able to provide me with the measurements that you used to manufacture the support that you made to hold the motor?

[@MrNonsencical]

since its friction driven, how is the wear and tear on the tyers?

[@hennybutabi]

It's not bad, not much more than normal wear

[@stellapolare9829]

The hardest part is to create a support. Do you know if i can find it online?

[@Poepad]

Give the video and hoverboard motor to a machine shop, first bracket going to cost you about $100, each bracket cheaper.

[@Andy-df5fj]

I take it you're driving it with a much higher voltage than the hoverboard did to get those speeds. How well does the motor stay cool under the increased power?

[@baldeagle5297]

It's also the small drive wheel paired with a much larger driven wheel.

[@vedantjagtap5675]

its amazing ..... but i want you to drive it on a muddy terrain or rainy season

[@dwaynealviola9076]

What if you made the hoverboard wheel the sprocket

[@bignose880]

Now put one on the front too :)

[@Tefelucky]

Best idea best video for ever!

[@DrVinylBcn]

It's easier and more effective if you put spokes to the wheel doing some drills. 😊

[@Neeneeneel]

What are the cable's that conect the accu and the howerbord

[@jaymagisa1273]

Is it better if you have the option to lift the small wheel so that when the battery is low you can use the bike normally

[@jackm6307]

Slide too far back on that seat, and Wipe Out! in every sense of the term. But seriously make it spring adjustable and you can sell the kit, or at least the basic part some of us don't have the equipment to build. Great idea, I had no Idea it would move that fast. Will it take off from a standstill with no peddling?

[@lukaszdroz1094]

This link is only to power converter and controller ,please give link to this wheel ☝️😏✌️

[@hennybutabi]

You should source a broken hoverboard locally. Second hand sites are full of them

[@nixter8739]

Does it charge the battery when you pedal or coast? Would it be easy to replace that hover board wheel with a sprocket/gear?

[@ivanpetrov2280]

Nice i have broken hoverboard so need another battery and controller, want to do that to my son bike. But how to make the stand without welding 😢.

[@hennybutabi]

You could try to bolt something together with L brackets

[@paulfrost8952]

How much does it slip/lose traction on the tyre when wet after going through a wet road and puddles.

[@hennybutabi]

When it's wet it slips non stop😏

[@paulfrost8952]

@@hennybutabi thought it would. It looks cool though. Do your legs end up getting soaked?