Here are some Basic mods for your New Edge Mustang! | Coyote power from a 4.6?

[@walk4348]

I will say this. My personal opinion, the 2V sound better than the coyotes.

[@vzyxe]

a man of taste i see

[@emperorsheev6309]

It definitely sounds better. No question. But the coyote is overall a better engine objectively.

[@FirstnameLastname-pe5ib]

Definitely has more of the muscle sound. The coyote sounds more like a sports car V8 like the motor in a Lexus is-f.

[@likenem]

Mod motors sound better but coyotes make better power

[@StillFlyingSoulo]

2v and 3v respectively sound better.

[@_silversoul_8641]

As someone looking into getting a new edge Mustang GT soon. I always appreciate these videos! Plus, I like how are straight to the point your videos are. Not just for the mustangs but for your other videos/shorts too. Thank you! :)

[@andrewhaberberger4903]

Just get a coyote bro

[@spitfiregaming4476]

@@andrewhaberberger4903nah 4.6 feels better

[@thebeast3822]

@@andrewhaberberger4903the price difference is crazy though for getting into a coyote vs a 4.6

[@yeanah2571]

Should've told them forged pistons, Cobra crank(optional), gen 2 Coyote rods and a T70 turbo. Reliable 600hp, and the exact combo in putting in my Crown Vic(someday)

[@octaviofierro3923]

On paper great theory

[@getoutyourfeelings2613]

@@octaviofierro3923 nah in real life it is

[@Sxppin]

Wait fr this is cheap asf setup i might run this

[@masterchavez3337]

On a 2v?

[@EYESIGHTS970]

I own a 03 gt with a lil less than 40k miles and I watched that video about new edges you made a while ago and honestly lost all hope with this 4.6, but now that I see that you have one and you aren’t doing a coyote swap, I’m dreaming again😁

[@RidinDirtyRollinBurnouts]

There's a cheaper way to make coyote power that's not nitrous. Get the on3 turbo kit for $2800 and you can make ~450whp with it. You need a few mods as well but you can get everything thru on3. All in all you're gonna spend about 5k. It's not cheap but when you consider how cheap the car is, you just made a $8000 car fast enough to hang with a stock C7 corvette.

[@user-ek6ti6vp6t]

​@@RidinDirtyRollinBurnoutsOrrr just LS swap it 😂

[@ramonecanady5608]

Thank you for giving hope to the new edge family!

[@occrc3333]

Bro I have been waiting for this ! I want a new edge so bad

[@grapeseed427]

Be prepared to pull the front crossmember to install those long tubes

[@gerichayes1948]

Gen 2 & 3 coyotes makes 900whp on boost with good tune 1500whp with upgraded connecting rods ported heads & sleeve supports🔥 I have a gen 3 im putting in my new edge🔥

[@Septagrim]

the manual trans headers will indeed work, just smack them a bit and let your tuner know which cylinders you hammered in. I sound like im just messing around but forreal thats the only way to get them to fit

[@markst.germain9286]

I saw your livestream congratulations on your new car.

[@bmanclassics4350]

Mine is a catback on the slp loud mouths converter deleted..love the way it sounds love that raspy crackle...

[@10mm_brosTV]

Do a video on what you would need if you wanted to 5.3 swap the new edge

[@mostwantedmotor]

Coyote swap is the move. It’s one of the easier platform to swap. The earlier 94-98 is really light at 3200lbs vs 3400 new edge which is much lighter than the 3800-4000lbs s197-s550. Run nitrous on the 4.6 and save 6-8k for a coyote swap. Then run the coyote with a nitrous setup. 600 plus hp under 10k

[@justindaniels17]

Can you do hemi power out of a 4.7 powertech? Ik it's not the greatest engines to make power but I think it has potential somehow someway

[@Ansharky3]

Gotta say, go with the stage 1 cams, tests have shown you only gain 5 hp with the stage 2 with heavier losses on the low end

[@taylorward2983]

Whats yo fav car, my fav car is the Mustang, my fav trim of the Mustang is the GT500, I love u bro, u the best

[@ryanjacobsen9557]

I have a 03 marauder that's pretty gnarly

[@walk4348]

Oh, and if you're going to do all that. Do an aluminum driveshaft and aluminum flywheel. Free up more hp and improve acceleration.

[@travisstockam3300]

Can you do a video on mods for the 06 bmw 525i i6

[@cleanname4439]

no mods that are worth ur money

[@Golden2.4_04]

HOW TO MAKE +450 POWER ON A DODGE NEON SRT4 BUILD yeah that’s right I’m back! Since you said you’d make the video like 3 or 4 weeks ago and still haven’t seen it!

[@ZRIEST]

My friend has one I’ll have to shoot a video review on it

[@taylorgang8424]

Haha kinda a funny question but what could u do with an 10th gen f150...??.

[@dayzeplayze8056]

Damn I wish this video was for the 99 cobra 4.6 l 4v Just got mine a few weeks ago. A steal for $3k

[@stevensharpe1419]

Can you do a video for same era f150 with 4.6

[@brandonadams6434]

i did have to beat my headers to fit and my steering "shaft" through the middle of the one side but it's worth it

[@reggiel6968]

I have Pypes Violators on my 2000 GT, They sound good.

[@NewEdgeDesigns]

Absolutely Best Platform!!

[@Spckuz25]

Would any of these work for the v6. New edge?

[@MaktoomAlmazrouei-g9q]

Hi how are you I have mustang gt 2004 I install camshaft CMC stage 2 it’s bad or good ?

[@Ivan-m6q]

Am i the only one that remembers when he said the 4.6 aren’t worth building

[@neoknight14215]

I wish the camaros were like that

[@AlexInTheSubie]

🔥🔥🔥

[@chumps7974]

Here are some ways to spend lots of money

[@Papawforreal]

I got 3.90 gear

[@GWalkFilms]

BASIC MODS ?

[@o-cedar6993]

2v > 3v

[@ktotheswiss1617]

and that's why I'm selling my 04 gt for 15 ss 1LE.

[@joshuapowell9002]

Do not straight pipe u lose power

[@itachi_mj9924]

Acting like putting a vortech sc is easy lol

[@ranware9071]

Not knocn the video at all.... but you cant be postin a mach1 talkin about 2v problems. 2v heads suc ass heavy its not the bottom bloc thats the problem its those heads and those sorry ass intake manifold. If ford would have made the coyote heads semi universal the 4.6 would definitely be NO slouch in anyway. Hell they could have made racing heads for the enthusiasts but they didn't

[@SN95.Danger]

Cams are basic ? Lmao

[@walk4348]

All that money..........just to make 350hp. 😂 They're not worth it. Just get an early gen 1 coyote.

[@yeanah2571]

Yes, buy a $25,000 Mustang instead of a $5,000 one, OR, buy an $8,000 engine to put in a $5,000 Mustang. If we were looking for easy, we'd buy an LS like any other cun7.

[@walk4348]

@@yeanah2571 an early Gen 1 Coyote isn't $25k dumbass. They're under $15k. He's going to do a Coyote swap. Which I like and can't wait to see.