Heritage Irwin Bit & Brace

Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.co...
-Radios Made Easy - radiomadeeasy....
-Amsoil - www.amsoil.com...
-GoDark Bags - godarkbags.com...
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystem...
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar

[@eirizarry2568]

Your comments on how some people dislike that fact that you receive give aways is spot on. Those people also do not understand that when you receive a gift...along with that gift, comes a responsibility to care for it and to try to ensure it goes on to the appropriate recipient. People don't understand the weight of that obligation. You are blessed and I subscribe mostly because your channel demonstrates "doing the right thing" or the "right way in life". Everyday I watch and each day I close my notebook thinking I am better for watching and I am always thankful for your video's. Again. Thank you.

[@timklawonn1785]

I absolutely love your channel. Not for just the content, but everything you and Mrs. W are about. With watching this videos as well as your others I have learned tons about wood working, family and stewardship. I love the way that you restore the tools and then send them off to help other wood workers. I know how expensive things can add up to be. I just started traditional woodworking and have been buying tools bit by bit as I run across them so I know how one can cherish the tools as well as the work put into them. Keep it up and no matter what don't let anyone get you down. Thank you for all your videos, especially the God in 60 series, those helped me the most.

[@JerrySmith-ih9rd]

I have that very case of old Irwin auger bits. They are all there & in great shape. I’ve forgotten when & where I got them….most likely a flea market.

[@StuartSafford]

Thanks for showing us these tools. It makes me happy to see them.

[@wranglerstar]

Stuart Safford Thank you Stuart,

[@StuartSafford]

You are very welcome.

[@KatanaKamisama]

Just a pot-shot, but the #4 could be (4/16ths) which is 1/4, and the the #16 could be (16/16ths) or 1".

[@Barbarra63297]

Cody, in my opinion, you give us a gift every time you post a video. Thank you.

[@Recovering_Californian]

The negativity you see is jealousy. That simple. You're doing a fine job. Keep up the good work.

[@wranglerstar]

mikeallenbrown1 Makes you feel a little sad for the poor fellows,

[@nc50express]

Eric C ah be quiet! :-) (haha. Just goofing around.)

[@SachiWI]

wranglerstar I understand how you feel Cody, but there aren't enough tools to go around for everyone. You're doing the best that you can with what is given to you that's all you can do. Until you've discovered the elusive money tree - I'm sure the good guys understand.

[@eurekamaruu6836]

wranglerstar It boggles the mind that any reasonable person would resent you having these tools, even IF you were hoarding them. I get most of my tools through estate auctions and treasure them more for the fact that somebody cared about them before I did. As long as they eventually leave your posession in good condition, you've done somebody somewhere a favour.

[@Blatherous]

This first wood tool I ever used was a bit and brace- the same set pictured here. Thanks wranglerstar, this takes me back to the very beginning and has inspired some very happy introspection.

[@youngwoodsman4110]

Wranglerstar you have been a huge inspiration to me. I have now been making axe handles with my grandfather and father for a few nonetheless now and making knives from raw prices of steel. I would have. Never gotten into collecting these tools and using them to build tables and tree houses without you. I sincerely thank you for changing my life from videos games and being focused on popularity to becoming a good, smart, strong man. Once again thank you for turning me for the better.

[@tndeere]

Very nice.I was given that same set of bits about a year ago.My box is rougher,but still all is ready to work.Really enjoy your family and videos.Thanks

[@MegaMoe63]

Please please don 't let the negative people get to you, the good people out number the bad, i know alot of people like me on your channel enjoy very much seeing these old tools. As you say they are a link to are ancestors, i know they are for me. My Grandad who would have been over a hunder now showed me how to use all these old tools when i was a kid and you inspired to start collecting them. Thank you for that Cody they bring back great memories, my Grandad was a very good and kind man.

[@lucky15driver]

Wow what a nice set of bits. My grandfather left his wood working tools to me. It's all I have of his to remind me of him. I have found it's a lesson in how to take care of your stuff. Great video!

[@outlaweric]

so well said. the older I get, the more drawn I am to heritage tools. your site has been an inspiration

[@BerylBite]

Mr. Wranglerstar Dude, Don't sweat any negative comments concerning people sending you neat stuff. It's just small behavior and the internet is full of small behavior. Your videos are valuable. They're full of love and sincerity and we the subscribers appreciate them greatly. I too am compelled to send you neat stuff, simply because I was want to repay you for the joy your videos provide.

[@jjaguns2505]

Funny that I saw this video today. I was out running errands with my son, when we finished up I asked him if he wanted to go to our favorite antique shop and have a look around. What did I find, the exact same bit set complete with everything. Love old tools and I really appreciate you sharing some of the treasures with us. Looking forward to seeing the new forge!

[@jakejones5991]

I think it's great that you share with others what has been shared with you! Great attitude.

[@Boomer8404]

Nice collection of beautiful old tools, thanks or sharing!

[@GTC1967]

I really admire that you share these things the way you do, thank you for letting that fact be known. I also appreciate the fact that you care for and respect these things in a fashion that is to be admired. I have commented in the past on the ever growing volume of "stuff" you seem to be amassing, not because I'm envious but because I worry about the weight of those things detracting from the essence of what it means to be a homesteader and someone who relies less on stuff and more on ingenuity and determination to complete a task. One of my heroes is Richard "Dick" Proenneke and I see you as a contemporary version of him. Dick did more with less and I have come to admire and respect that facet of his character probably more than any other of his unique qualities. You serve as an example to others who wish to live a simpler more fulfilling life and knowing that an existence of such a life can be had with a handful of essential items is important. I would hate to think that anyone might become discouraged about making such a positive life change because they only own a few inexpensive hand tools or believed they needed a bunch of power equipment to start living the way you do. You have never asked to be looked at as any kind of icon or trend setter for the lifestyle you have decided to live but you have become one and it is important for everyone who enjoys your videos to understand that there are a multitude of ways to live the way you do and still be successful at it. I would love to see you offer alternatives or substitutes to the tools you use when you are working on projects, I think that would be encouraging and helpful to those viewers who aren't as blessed with such a large variety of tools and equipment.

[@joer5627]

I one day hope to find a brace and bit set along with an eggbeater hand drill. As my Grandson gets a few years under his belt I’ll introduce him to some of what I learned from Mr Amos. He was a fine finish carpenter and a fine man who spent time with me. I think of him every time I pick up a hand tool. I still miss him decades later. As an aside, I still watch the absolute joy you had upon inspecting the axes Prandi sent you. That was a special video. Thank you, Cody.

[@drummerglenchin]

I liked your set of bits so much, I immediately went on Ebay and ordered a set. Got them a week ago. I love them...and you are right. They do cut a much cleaner hole than todays bits on electric or battery powered drills. I love these bits, the case and even enjoyed the vintage instruction manual. I was pleasantly surprised to find that the seller included three extra antique bits not included in the original set. I'm one happy Wranglerstar subscriber... Thanks a bunch...

[@karsonbranham3900]

I hope that you don't change a thing Cody, people who choose to be negative, will never be happy unless they choose to be so. I think it is awesome that you pass the passion on to the next generation, through the channel and through sharing the things that come to your care.

[@ChrisMassie_RVA]

It's 2017 and the iPhone 6 is completely irrelevant now. Keep sharing these heritage tools with us. Thanks, Cody!

[@dorsetengineering]

I've taken some time away from the channel of late, but this video has reminded me why I subscribed in the first place. The points you raise about previous generations taking pride in their tools is clearly demonstrated here in this beautiful set of bits. You must feel honoured to have received them as a gift from a subscriber,. I think I speak for many viewers when I say that you have earned the right to receive beautiful tool gifts from viewers because we can feel safe in the knowledge that whatever we send you will be looked after and cared for. I hope to be in a position to send you something that will be of use to you from my vast collection, as I tidy up our 40 years of collecting and working with tools on our small holding here in the UK. Best wishes, Hugh

[@wranglerstar]

Hugh Frater Thank you Hugh,

[@MemphisCorollaS]

Came for the tools & bits, got a thoughtful sermon. Didn’t know that I needed to hear that today, but turns out that I did. Thanks for all the great content!

[@friscoray2]

Thank you for the stories. You’re a wonderful man. I feel that your stories help bridge the gap between the wonderful past and the future.

[@ArkansasPilgrim]

I've commented about this on other vids, but I'll repeat here anyway. Those are beautiful. I have that exact set, but in not nearly as good condition (to understate it). The ones I was given had been on the floor of a basement and had gotten wet. The wood case is a bit warped and worn, and the bits and brace were pretty rusted. I cleaned them up a bit, but I was unable to free up the ratchet in the brace. They are usable, and the bits are still sharp, but they have a lot of discoloration on them from the rust. Now that I've seen you cleaning and restoring tools, I'm going to re-clean this set. I don't have a bench grinder, but I do have access to one now, so I'm going to brush the bits to get the discoloration off. Then I'll re-clean them with Evapo-Rust again, if necessary. I'm not sure what to do about the ratchet in the brace, because I don't want to damage it, and I can't dis-asseble that part because it's seized up. However, I recently obtained a Stanley brace at a yard sale ($5.00) that is in excellent condition, and the ratchet works fine on it. Anyway, thanks for sharing all of this with us, W. Keep up the great work, and God bless you, Mrs. W, and Jack. Lucy & HR, too.

[@daveh777]

My favorite one of your videos!!! Well said good Sir! I see you as a shining example of who we should be! Thank You!!!

[@aleblanc3547]

"The issue is not with me, it's with you." Very, very well said...it won't stop the attacks, but as Jim Rohn once observed, bad people do bad things otherwise they wouldn't be called bad people.

[@aleblanc3547]

:>) Love the sinner, hate the sin.

[@jacobb1809]

I saw that Irwin case in your video on the antenna booster and was hoping we would see more of it! Doing my first real timber framing on a 4k sqft home right now and would love to have the time to do it the old fashioned way. Even tho I am using modern tools to cut joints and power drills for holes and what not your videos teach me a ton and I have a lot more respect for the old fashioned ways of building and life. Thanks for great videos and inspiration God bless you and your family :)

[@wranglerstar]

jacob bradford Thank you Jacob

[@earlgrey6375]

When I wss a young telephone lineman..some 30 odd years ago..we used brace and bits to bore through poles for framing and hanging our cables. What torture! Hanging off the side of a pole trying to crank that bit through a foot thick creasote knotty pole! But they never failed to work and are pretty light weight to carry up and down pole all day. Now linemen have small gas drills to do the job. Great video..brings back memories.

[@wranglerstar]

Earl Grey That sounds like hard work,

[@GUNNY523]

Holy hell! Did anyone else's jaw drop when odd opened the box? They really looked like they were actually taken care of and treasured. Congrats Cody and I know you will put them to work. Hopefully we will get to see them clear new paths.. so to speak.

[@nevahenuf]

I see a man getting blessed by his hard work. If people spent half as much time as you do on videos they'd have an impressive amount of tools.

[@ericingram3261]

I love the fact the you stay true to yourself cody. So many of us are worried and consumed with what others may think about us. While I a agree it is good to act in a proper manner, does it really matter what Joe or Sam or Bill think about me? No it doesn't and I am so glad that you can stick to who you are. Keep up the good work. O and I enjoy all my granddad's old tools as well. Keep these kinds of videos coming. In his grip, Eric

[@gardeningpreacher]

I just bought this exact same set (with case) - in almost as good a condition with a really nice brace! I used it for the first time and really love it!

[@LarryMReed]

Not sure why, but I have watched this video a couple of times now. This bit set seems to speak to me for some primal reason. I have had several wood workers, Carpenters and Tree Surgeons and loggers over the decades in my family. I think one of the Carpenters had a set very much like this but my memories are not as clear as they used to be. That is the only thing that makes sense as to why I like this video so much.

[@111raybartlett]

Great video! I inherited my grandfather bit and brace, which I believe was his fathers. It didn't come with bits however, and being a beginner woodworker I just have to use it. I'm in my early 20s so I grew up in an electrical age but have been collecting hand tools when I can find them. So to have my grandfather bit and brace is really something to cherish! I have managed to scrounge a few bits from pawn shops and such. It really is a joy to use! Hence my enjoyment of this video. Can a bit and brace effectively use bit with straight shafts? These I have! but finding the old type with the four sided taper is hard!

[@springwoodcottage4248]

Most old tools end up in land fill, folk clueless to them, wonderful to have someone who loves & cherish them. Anyone wants similar can easily get secondhand at low cost.

[@samazuk57]

Great Wisdom, Great Tools, Great Channel. Keep it up WS, don't let the negativity get you down.

[@alextaylor3513]

Thanks for sharing, I enjoyed the tools and gaining a better understanding how you cherish and caretake your tools.

[@deckum23]

I love what you do, I go to yardsales now looking for the vintage high quality tools in usable or repairable states, and I restore them to my liking, but still I don't have much, but it's a start.

[@Scott122139]

"Sheol (Hell) and Abaddon (Destruction) are never full, as the eyes of man are never satisfied" . It is difficult for people to get past wanting material things. Those who cannot be happy for the good fortune of others deserve pity, as they will never be content. I watch your channel as I enjoy the community spirit of the viewers as much as I do the spirit of independence of you and your family. I am always happy to see new tools and projects in the shop. Thanks, Scott

[@KusanagiRyuuichi]

Me? I like that you're sharing these tools. Because I get to know there are tools of old with many history. Which I might get one myself... Many thanks Cody.

[@tylerfletcher722]

I don't care what the people say that is negative. You do a magnificent job with your channel, I'm a high school student and I look up to your channel and it really helps with all the things I'm trying to do, this is practically my all time favorite channel. Keep up the good work 😄 keep them videos coming

[@christopheralexander5560]

I really like what u do u bring the modern into an old fashion way

[@roballen3026]

What an awesome community of people.

[@Jarastlad]

Amazing tools Cody, I'm sure you'll make the best use out of them. About people leaving bad comments or harmfull ones : sometimes it is easy not to ponder enough how much words can hurt. You cannot unsay what has been said ! As always, focus on the positive comments. Thank you for what you have taught us and what your experiences that you share with us !

[@grant605gb]

Great video and totally justified comments about the disposable quality of items today.

[@Austead]

Those are gorgeous!

[@gatorfan316]

It is so neat to see this video as I just picked up a set of these exact Irwin bits for a really good deal. The box mine are in is in better condition but the bits are in the same condition and I also have the card inside. I didn't know how to date them so it's nice to hear that they indeed have some significant age.

[@wombat170170]

G,day well i have not long found your chanel and i have been watching all of them as i can i am impressed with the old tools you are doing up and has inspired me to go out and fined some and yous them myself as im on a pension i can not afford the newest tools all the time but want to do the best work i can so thank you and keep up the good work

[@wranglerstar]

+heath mckinna Thanks Heath.

[@Ivangomez-bo7vs]

ive been looking for a set like this for so long!

[@TheShavingWoodWorkshop]

What an amazing story behind a wonderful set of bits :-)

[@JLMW5410]

I was fortunate enough to be the recipient of my Grandfather’s tools. Unfortunately, he passed a while ago, but not before he taught me a lot of life lessons… through his tools. I now have them proudly hanging in my workshop and I get to teach my kids (who never got to meet their Great Grandfather) about him… through his tools.

[@shankill178]

A nice set of bits Cody. I have a set that were a present when I started my apprenticeship in 1975. They are still in good condition and I was using them regularly for years. They wouldn't compare to the condition of those Irwin bits of yours but every carpenter/joiner I know are super careful not to chip or damage them in any way. That was the days before speed meant more than quality though.

[@1st67mustang390]

Wow. .those are beautiful. ..and I noticed the box and was glad u pointed it out :)

[@russcorbett3923]

Awesome video and Great message .....thanks

[@thelifeofmatt3229]

i love seeing all the old tools

[@mitchwright6948]

Beautiful set. thanks for sharing them.

[@williampearson6062]

wranglerstar I love the videos I love the content and I love coming in from a hard day's work and watching your video because it never fails when I get in I open my laptop and see wranglerstar just uploaded a new video and if I had a bad day at work your video always calms me down so please don't stop making videos and keep up the good work

[@cutemonkey4974]

Cody you don't need to justify yourself or your actions to anyone. I'm sorry you felt the need to, but like you said it's the problem of the person complaining about their perceptions of your good fortune. Love your work mate.

[@tuplin8649]

Funny you say that. I had paused about 5 seconds before to grab a cup of coffee and baileys just for this video. your videos keep my brain alive over here in Abu Dhabi. thanks Cody

[@budmoore8144]

that is a very nice set of bits what a treasure

[@Bushcraft412]

If I remember correctly there were companies you could send your bits to and have some kind of chrome/alloy coating placed on them. And that it was a pretty common practice because these bits were a huge money investment back in the day that people had them dipped every handful of years.

[@wesdianejones]

After much thought I truly believe the comments are not at all about the negativity and rudeness as much as it is about challenging another person. People trying to fill an inner void by attempting to knock down another. It can drain you, if you let it. My guess is they and their opinions will end up in the same place as that iPhone 6. I would be proud to be held to the esteem of that legendary Irwin bit & brace set.

[@chriscoy7040]

Cody I wish I had some old tools to give you but I don't. Real nice video can't wait to see them in action.

[@glduncan68]

Love the videos. Am also from Knoxville and glad to feel the connection.

[@bluenorthnw]

Good old tools are out there. I found a brace and set of bits at a local antique shop for $20.00. Just had to look and know. Something pleasing when working out on my property without the whirring or whine of electric tools.

[@clifton1721]

Well put sir. Thanks always for sharing!

[@MrWildapil]

Well said, Mr. W. You are on point... It is a bad way to carry one's self. Thank you for sharing another great video.

[@mikemarriam]

Cody, I always felt good for you receiving the tools. I felt good thinking you were building such a fine collection and assumed everyone was giving them to you because they knew you could use them and would care properly for them. I'm sorry you have to deal with other people's sinful nature in this matter. God bless you and your family. Mike Marriam

[@paulwastaken]

wow! amazing, and how I enjoy this type of Wstar video... onto part 2.

[@andrewbrimmer1797]

Yesterday on 9/30 I found a set of these in medium thread lead screws. I got them today for $50. Excellent shape and in case with wooden case and booklet. Just had to share with you

[@naui2]

I had to buy my own set because of this video! Thanks ! 👍

[@chrisconley3579]

People are mean. I'm glad you get this good fortune! Great to see these tools and other goodies.

[@zartan7779]

That's a wonderful set . I would love to find a set like that , I have small amount of loose drill bits. Thanks for sharing

[@cowsofsuffolk2297]

I know that the negative comments can wear on you but Rene bet the thousands of subscribers that support you. God bless

[@nathanleach9269]

It's sad cody that you have to explain these gifts to your subscriber who should by now understand what theses tools mean to you and to the folks that entrust them to your care. It's awesome that you gift these tools to folks who will take on the task of carrying on the history. We have lost so much of our heritage of basic skills and task that we have lost touch with true happiness. You have lit a fire in me for tools for vintage, proper, tools I have a love for axes and this year God willing I will fell my first tree with my grandfathers axe. Before your channel I thought tools are tools power tools is better thank you for showing me a better way.

[@davidparis9826]

Well said. Well done. Keep up the good work

[@66bigbuds]

In reference to the intro...Well said!! Irwin still makes good quality driver bits. The only brand I buy.

[@07roadking43]

In my eyes YOU make a great caretaker Cody , I don’t know you personally but i feel i do and ive always been good judge of character, you will look after these vintage tools and care for them better than most !!! They are beautiful !! So use them wisely so your sons son can also . Ive been looking for a nice set of brace bits a long time i have a nice brace but alas no bits lol ill keep my eyes open so until then it still looks good hanging on my tool rack !!! Enjoy !!

[@grintalthecrafter3604]

That was the fastest 10 min video I have watched from this channel.

[@ships21cooker]

I owen and use many tools that 100 yr. and older,they still work very well and if I don't have power all they need is food for the power source,me. yum, lern to fix the stuff you owen and keep on going.

[@calebcothron2324]

I love that people send you this stuff, because I love seeing you put them in videos. but I would be a liar if I said i didn't get a little envious of some of the treasures you get to put your hands on haha! hey, if you ever need to find a home for that timber framing drill *wink wink* haha! jk, keep making awesome content, God bless.

[@MrOmcif]

I bet some folks send you these items because they are not using it or know not how to use it. They in turn find enjoyment in watching you discuss them, the use of them and of course using them. I was a hater but like you stated I thought of it for a minute and came to the conclusion stated. Keep it up as I watched my grandfather use tools such as these and they are now long gone. I for one enjoy your discussions of the tools the proper use and the history behind them. Thanks

[@rhein_provinz]

Like your comment about things, gifts, envy and a dark heart. You are absolutely right!

[@thegreatoutdoors3822]

Jack took really good care of that.

[@MrZachjeffrey]

I liked hearing your thoughts on envy

[@JeffroDH]

I enjoy the tools and can admit a spark or two of covetousness on occasion when I see how beautiful they are. But keep up your good works. Put the negativity out of your mind as best as you are able.

[@warypioneer6513]

Yep. We only see a sliver of your life. Thanks for giving us that sliver. "You think you know, but you don't know." - Chuck Noll

[@Kris_at_WhiteOaksFarm]

Women/Girls are Different from Men/Boys. I celebrate the difference. I know women who can do amazing repairs and assemblies using just a butter knife and a four inch, red pump, and I know men who can't figure out how to fix anything. We're all different. It's sad the negativity you get regarding gifts. The reverence and joy you have for old, quality tools is beautiful. Thank you.

[@heathcoat67]

very well said

[@mktward]

Sweet!! I've been looking forward to these videos!! I'm soaking them up! I have also been looking for a nice set of bits to add to my tool collection, I have a really nice vintage brace that I've been wanting to put to good use, but I need the bits to go along with it. Recently looked online and found the sets like the one you have Cody, they go for around $70.00-$150.00. Nice job presenting them Cody!! I think Jack would love to work with those throughout his life. Hint, hint......

[@D0VE4JESUS]

Geat job!

[@Basca112]

when my grand children find my iphone 6 they will say, "the selfies my grandfather made with this phone were exelent, they dont make this kind of quality today" :D

[@thenorthwestpreppers4457]

it certainly IS relevant! I just used my gear drill for a project that a power drill would have destroyed..... how beautiful this is!

[@davidarcaris7500]

Your absolutely right mikeallenbrown.

[@5942USMC]

Was anyone else cringing until he fully seated the smallest bit? I was so worried there wouldn't be enough clearance to close the box and it would somehow damage something. Beautiful tools!

[@Ruger41mag]

pay it forward......good to go Mr WS

[@aliajactaest7707]

I agree with your every word. Well said sir. Watching your channel sends me back to childhood visits to my grandparents; memories I treasure. I don't agree with everything you say, but isn't that a good thing? In disagreeing with an alternate viewpoint, aren't you forced to examine your own? Being confronted with an alternate point of view doesn't give someone the right to spew bile. It's a sad indication of their own intellectual weakness ("Methinks the Lady(s) protests too much"). Warmest regards to you and your family, sir.

[@2338]

very nice things

[@9mike747]

I'm just starting out with tools like this and have trouble knowing who's producing quality. Do you have any recommendations for "modern" auger bits that will last and cut cleanly?