Ok but the reason for those 5 star Tristan reviews is because of an awesome inside joke! Basically Scalpers in Japan have a habit of constantly picking up multiple copies of highly sought after Gunpla and reselling them at ridiculous prices, so the Gunpla community in Japan decided to fight back by spreading misinformation that the Tristan is a really good kit even going so far as to making Custom Tristans and putting 5 star reviews on online store pages for the Tristan and the Scalpers fell for it, now trapped with multiple boxes of horrible Gunpla that will never sell. Thus is the strange reviews of the Tristan youve been seeing and that you showed in the video!
@reallywhydidyou3 жыл бұрын
Pro gamer moves right there
@huyvuminh10483 жыл бұрын
serve them right
@aashoe33 жыл бұрын
BIG BRAIN
@fraser72113 жыл бұрын
Should have review bombed the good kits for good measure lol(like Aegis Knight). Very good work indeed thou.
@matlavi40753 жыл бұрын
That's amazing!
@UMIF0013 жыл бұрын
The Cherudim is now red and 3 times faster than average
@ominousmecha5003 жыл бұрын
Ah shid
@sgt_derpguy_25413 жыл бұрын
What would happen if it also used Trans-Am?
@UMIF0013 жыл бұрын
@@sgt_derpguy_2541 6 times faster
@kaimuraki56853 жыл бұрын
So... ork logic?
@Kevin-tw2dy3 жыл бұрын
@@UMIF001 no 3³ 27 times faster
@R_Caine3 жыл бұрын
I think it still looks great. Besides, as a legendary, curly haired, bearded painter always said: There are no mistakes, just happy little accidents.
@Farron_013 жыл бұрын
I miss Bob Ross
@legoskyminer31553 жыл бұрын
In the wise words of Duncan Rhodes: “Thin your paints. Two thin coats will always look better than 1 thick coat” For me, most miniature paints thin well with water, and I’ve had great results when using them to paint gunpla.
@mellasio39113 жыл бұрын
ya i try to stay awey fron can paint coz it covers details
@SideswipePrime6063 жыл бұрын
Especially Citadel paint, which he was using. It's very thick out of the bottle.
@tylerkeen89893 жыл бұрын
Dude I love this (hopefully) series! I want to get into customizing kits like this myself, and you sharing what works and doesn’t work is so helpful because it seems we’re learning together! Being unafraid to show off your mistakes and learning is something you don’t see in a lot of model kit videos so it’s a nice change or perspective. Keep up the great content!
@nubnce57053 жыл бұрын
Here's a tip for masking complex shapes: Place the tape over the entire part first and then push it down so it follows all the contours of the part. Then using a hobby knife, cut out the shape and peel. The tricky part is to not cut too deep that you end up cutting into the primer. You'd want to use thin, hobby grade masking tape and a fresh blade for your hobby knife for best results.
@seanchoy2363 жыл бұрын
Idk why the first thing that came to my mind after seeing this was the Hazard Trigger. just missing the big blue button on the crotch
@MDHasan-pn7oe3 жыл бұрын
MAX HAZARD ON!!!!!!!!!!!!!!!!!
@R_Caine3 жыл бұрын
Would that blue button say something that sounds a lot like "cut"?
@bulletgrazer21843 жыл бұрын
@@MDHasan-pn7oe UNCONTROLLED SWITCH, BLACK HAZARD! YABEI!
@jeffoppel24363 жыл бұрын
SUPER BEST MATCH!!!
@ruimasaki18873 жыл бұрын
I actually see it as rabbit rabbit form.
@kanadetone3 жыл бұрын
Fantastic custom! Honestly, it's still great to look at even after you went into depth in pointing at the challenges and flaws. Here are two suggestions I would have. First is that if you're impatient like me, finish (cut, clean, paint, panel line, decal, topcoat) your custom in portions: chest and head first, arms and legs next, weapons last etc. Find a sequence that you like. I find that having these gratifying checkpoints in a build really generates motivatation as you can see how your finished custom is coming together. Another suggestion would be to determine what you want out of your custom. Do you want a beautiful custom action figure kit that preserves full articulation, or a stellar statue build that focuses on being an art piece over having a fully poseable gunpla. This personally helps me determine how to go about a build. I'm still learning too, but I hope this helps you and everyone because viewing custom gunpla is really awesome!
@ADBXoon3 жыл бұрын
Little tip I got from a Gunpla customizer vid some time ago, if you want to get hid of those gapping seam lines and still look like nothing happened, save the runners where the parts came in originally, when the kit happens to have those spaced spots you can cut the runner in smaller pieces and dip then in paint thinner, the thinner will kind of melt the plastic and you can use it to cement the seam over with a plastic that match the color of the parts you are working with, then just sand it to look like it’s a single piece. (I know it may not have worked on this kit cause it’s an old one, but still)
@uoducks523 жыл бұрын
It's kind of refreshing seeing someone on KZbin customizing a kit with minimal prior experience. I hope you continue to customize future kits and post em!
@jackamoeXxX3 жыл бұрын
I started doing a custom kit for a contest, nothing has gone well and this video cheered me up so much, thanks a tonne, confidence restored
@kurisutina93043 жыл бұрын
I actually want to see how he can make the cheddar cheese master look better
@fujitamakos88843 жыл бұрын
i think gunpla network did something like that as a mini series as well, where they try and customize and fix issues the kit had.
@Fornthing3 жыл бұрын
@@fujitamakos8884 link?
@ineon_playz99643 жыл бұрын
STOP FLEXING THAT THIS IS ONLY UR SECOND CUSTOM AND UR ALREADY THREE TIMES BETTER THAN ME. My ego has been destroyed...
@maxaryan1003 жыл бұрын
Trust me man he sucks ass this isn’t that impressive. He didn’t even thin his paints. On his last custom he didn’t even prime and spray painted on the runners. All three of these things are rookie level mistakes. It’s honestly embarrassing how he’s been building kits for years and been in the community but doesn’t even know the most basic modeling techniques. You’ll be better than him I know it.
@audimalvin57633 жыл бұрын
You should check it'sagunpla first custom kit, this is nothing to him
@talamzaman85363 жыл бұрын
@@maxaryan100 ok bro jeez
@ineon_playz99643 жыл бұрын
Ok ben dover I'm just mad because my first and only custom so far is far less inferior to mechas first custom... Well at the very least I'm working on another custom. U can check me out on pinterest with blue nipper models!
@1295antonio3 жыл бұрын
@@maxaryan100 no need to be mean about it. I commend Mecha for learning through trial and error. It's an honest way to learn. Just because he's been building for years doesn't mean he'll be good at customization when he decides to get into it. Straight building and customizing aren't mutually exclusive.
@draaxus29693 жыл бұрын
Call me when Mecha goes balls deep into scratch building with pla plates Edit: Oh shit nevermind, he's making a kitbash Gundam frame, hype.
@fraser72113 жыл бұрын
Cant wait to see what you end up doing for the IBO custom with how well this custom turned out! I'd like one of my first projects to be a mix of Barbatos Lupus(might get the Rex not sure) and Reginlaze Julia with some 30MM spear for a Final Fantasy Dragoon Gundam, so ill be taking notes from your released content on that Dantalion custom for sure!
@kenlee21933 жыл бұрын
this absolutely does NOT look like a beginner's work, honestly. Time to get a compressor and airbrush, proceed to the next level of gunpla builder. I used tamiya spray cans before I got myself a compressor and an airbrush, and those cans are quite wasteful for spraying small parts.
@V2ULTRAKill3 жыл бұрын
@Bob Dole that doesnt mean they arent wasteful They are its objective fact you use more paint per surface than an airbrush when dealing with small parts
@bluemooncomics3 жыл бұрын
i make my own painting clips with alligator clips from the hardware store in the electrical section and bamboo skewers. they are much cheaper then buying premade ones.
@misora25chan3 жыл бұрын
I did that as well. Stick them with barbecue sticks and they are ready.
@bluemooncomics3 жыл бұрын
@Brique Zallivam the ones I get are fairly weak
@zzephyrenex53203 жыл бұрын
(Sees Yellow and black “hazard” signs with shiny Red) UNCONTROL SWITCH! BLACK HAZARD! YABEI!
@Quadrolithium3 жыл бұрын
SUPER BEST MATCH!
@zzephyrenex53203 жыл бұрын
@@Quadrolithium lol
@insertnickhere50223 жыл бұрын
If you have trouble filling up the seams using cement and you are going to paint the kit, your usual everyday superglue(such as loctite) is your best friend(at least for me) also, if you use lacquer spray paint and panel line the kit with enamel paint, you won't destroy your paint job(unless you scrub hard)
@blacksheeprising97103 жыл бұрын
It's really cool seeing the customization process from someone who hasn't really done it before. It's a great resource for other people looking to get into it. Also, love the use of matte. Not enough people use different textures in their builds.
@linhhong68043 жыл бұрын
More of this please!! As a straight builder myself, trying to custom paint recently, I feel like I'm learning with you and it's a joy to watch! Love it
@Choatemister3 жыл бұрын
WHERE DID YOU GET SO MANY IBOS IN ONE BOX?? Was it ebay?
@B3rrymon3 жыл бұрын
HLJ is my guess, they're packing magicians haha
@ignisofficialgaming3 жыл бұрын
Tip for hiding brush strokes, thin out the paint a bit more by brushing some of it off onto a piece of card or your table protector a bit. That way it reduces the amount of paint on the brush enough that you will be able to cover the piece but have minimal excess on the parts
@freakyslimedude52663 жыл бұрын
i will say the wobbly lines on the black and white warning pattern looks really nice actually, it gives it a sort of industrial messy vibe, like how most industrial vehicles are dirty or scratched up
@careless33603 жыл бұрын
As an IBO fan, I thought you'd never make a custom, I then realized you were gathering parts, Nc
@vandybowling51083 жыл бұрын
I like hand painting my Gunpla. It takes forever but you feel so good when it turns out well. Model masters is a good brand for detail work. And the metalizers don't even leave brush strokes.
@JamesWhite-qz7st3 жыл бұрын
-Tamiya makes tiny masking tape. You can get a pack of three that comes with a dispenser for a pretty reasonable price. -Tamiya also makes panel line accent color that is meant for use on kits that have been painted and top coated. It comes in black/grey/brown and the bottles have built-in brushes for application. (If you use the panel line accent color you will need to use enamel thinner in lieu of the plastic eraser)
@luketaylor44933 жыл бұрын
As someone who is trying to get into customizing gunpla, these videos are super useful, I love it
@darkwardragon27513 жыл бұрын
The reason why I custom paint kits even if they have a lot of issues with it is that I have a vision of the kit in a much cooler colour and want to make it unique so it's something no one else really has
@raveaustria81553 жыл бұрын
the hazard part for me is perfect, the bleed reflect the real life paint drips in some barriers. goodjob
@ShayLeokra3 жыл бұрын
That is a great choice of paint, you've made a metallic paint that is close to real life mech design
@fauxvier85193 жыл бұрын
I dont think he even had to mix and match paints. I think he just relied on those citadel cans and a lot of topcoat
@williamwu79383 жыл бұрын
Most of the stuff I paint is by hand and the number one tip I can give is to get paint thinner. You want to get the paint to have a milk-like consistency, and it goes on smooth and dries with no brush strokes. Thinner saves lives. (also tamiya acrylics last insanely long)
@invinitezero3 жыл бұрын
I'm just casual modeller, but I'm gonna help give some tips 1. First of all, TOP COAT it, either flat or gloss clear coat it's make even unpainted gunpla look alot better, it's make the surface texture more uniform and smooth, also cover the brush mark and flush water decal with the surface. 2. You can use regular spraycan for saving budget but avoid flat color paint for easier panel lining and applying decals. 3. Its ok a little bleed on masking on harder shape, you can use hand brush clean it up, and top coat will cover the light brush mark. 4. Deep seamline need to be removed with putty tamiya or other brand if to deep then its need an epoxy putty but consume a lot of time. 5.And lastly, no need to be perfectionist, some of casual modeler i know that can produce professional work end up just top coating their kit because full painted kit consume a lot of time.
@Darkmajic3 жыл бұрын
For hand painting, I’ve heard that doing multiple layers in a lattice pattern helps hide brush strokes
@bigbigmushy73383 жыл бұрын
That was the best advert in a video I've ever seen. Best gunpla reviewer and best ad placement. Btw u got me into gunpla and gundam anime
@jamaljam133 жыл бұрын
As someone whos just got into the gunpla hobby his struggles were hella relatable Lol
@RubenDelight3 жыл бұрын
For tools, there should always be something like a modelers hobby shop in the EU. It's generally for train modeling, and other like Revell type models and stuff like that, they will generally have everything you need for gunpla modeling as well. For sanding you can also obv just get nail files and stuff like that, or just go to amazon which'll have a good number of things! When it comes to hazard lines. You can buy very thin modelers masking tape that comes in various thicknesses. Tamiya sells it, or you can just get them from like aliexpress or something for cheap
@jonathangarza16563 жыл бұрын
honestly this looks really good for someone customizing a kit through trial and error. thats only going to make you better in the long run. i would suggest obviously an air brush and some tayima weathering kits to weather them and even get the gundam marker airbrush to use as well. i find both a regular air brush and acrylic paints and gundam marker air brush which you can hook up to a compressor are worlds better than the cans. i would use the cans for big projects like the neo zeong and the jumbo size kits. proper tools as well which thats an obvious. still great job on it.
@SideswipePrime6063 жыл бұрын
Wow! Those Tamiya spray paints are downright sexy! I gotta buy me some of those, especially that Metallic Red! EDIT: People recommend thinning your paints with water. I'd recommend also using a wet palette for painting. Just get a tupperware, put a paper towel in it, wet the paper towel to make it "swampy", then put parchment paper over the paper towel. Doing this gives you a surface to easily mix paints and thin them as much or as little as you want, the paints also won't dry out for a while when on a wet palette.
@OtherSpartin3 жыл бұрын
I just want to say, cause I know with how you talked there were a lot of things you didnt like in the process, the kit still came out beautiful! You did a great job choosing the colours you had and while it took extra work doing it is better than the work never happening. The colours are extreme for me but it would really has a great shelf presence for my kits now if I had it. Creative modifications in the legs to make colouring and disassembly easier is something I always love and even for a rough shot job your filing work looked clean. In the video I didnt see any Brush strokes on the guns myself which the decals probably did do a good job with. Lastly the decals were straight clean and tastefully placed, didnt feel overwhelmed with decals. For my standards as a customizer its easily 8/10. Better than a lot of my own work!
@B3rrymon3 жыл бұрын
Bro you did a great job! Just finished the video! I handpaint only bc of no room for an airbrush, one tip from me: just dilute your paint and work in several layers and you're fine! Keep it up with the customs!
@artistpoet52533 жыл бұрын
11:29 try this for small or super detailed masking: pva glue. Just put a bit on a palette, brush on and rinse brush very good afterwards. Let dry then paint. Be sure to use the same kind of tweezers to remove the film as you would for a soft decal. A plastic cocktail pick or wood tooth pick is good to get an edge open. Otherwise, there are lots of masking fluids found in shops that carry drafting/illustration supplies. Sanding blocks/sponges are best found in beauty supply shops along with tweezers. Use binder clips, called bulldog clips in some countries, to clamp guns together. These are found anywhere stationary and school supplies are sold.
@helix7133 жыл бұрын
The custom looks awesome and that red paint job looks amazing. The finish looks like a hot rod car.
@557deadpool3 жыл бұрын
No it really isn't
@frankbull11263 жыл бұрын
you can get a liquid mask that you can peel off after you are done. also for the seamlines you could try painting the inner and outer pieces, assemble, then seal them and patch the paint with a brush
@queen-val61353 жыл бұрын
I have a real old rubber grip vice from citadel (like, stopped being sold a decade ago old) I put parts in for seams but tbh a bunch of clothes pegs in the right spots works nearly as good. I have some insanely high grit sandpaper I can cut up for little crevices I got from Halfords/generic automotive and bicycle store. Also, as our lord and saviour Duncan Rhodes tells us, two thin coats. Put a brushful or two on a plastic pallet/ceramic tile and thin with a bit of water, and when it's fully covered you can scrub off that pallet in sink and use it again
@TheAshlight413 жыл бұрын
Custom gundam frame type? Interesting... I will look forward for it.
@luminusprime3 жыл бұрын
If you're looking to spray multiple colors on a small piece ignoring the sculpt, I recommend making custom masks by placing the part face down on the dry side of wax paper and drawing the outline. Flip it over, cover the outline in some variation of scotch tape, clear packing tape is good because it has a nice width but NOT masking tape! Masking tape is too thick and not adhesive enough to work at model scale, that's why you get fuzzy lines and bleeding. Now make your stencil with a fine tip sharpie. Then you can cut it out, a bit oversized, peel the mask off, and apply it to the part (do not do this until the main color is *completely* cured). Peel off while the new paint is still tacky to avoid tearing.
@GojiraFan-in9oo3 жыл бұрын
I'm planning to make a custom 1/144 Devil Gundam in its Resurrected form. (The giant banana-slug looking form that it got by absorbing Death Army machines)
@tylerstocker61893 жыл бұрын
If you go to a hardware store you might find some small electrical clips, you can put them on bamboo skewers and make airbrush clamps.
@michaelwoodyard79953 жыл бұрын
Tamiya sprays are lacquer and GW are enamel. Which is why the panel line wiped off easily on the Tamiya sprays. Using a new blade to cut masking tape, which Tamiya masking tape is great, is a good idea. Zach from Zakuaurelies has a lot of great tips that has helped me in my painting adventures. Though he uses an airbrush, many techniques can be applied to spray cans. Gunpla is Freedom, enjoy the hobby how you want.
@michaelwoodyard79953 жыл бұрын
Using some makeup tools, nail file and tweezers are usually cheap and easy to get. May help you get into those harder to reach places that the sanding block you have can’t reach. I would suggest a normal nail file and a “finishing” nail file. I also spray my lighter colors first, mask, then spray my darker colors. I also, use a toothpick or skewer end to help make sure the masking tape is all the way down to prevent bleeding of the paint.
@MedskiPurnamski3 жыл бұрын
Fun fact. You can actually buy alligator clips at any electrical store. They're usually used for small jumper cables. You just need to buy or make your own skewers for it.
@Leonidas_L._Lionheart3 жыл бұрын
OH NO!? So Halloween will be the return of Fumina’s Revenge? We all gonna suffer with you Mecha ^^' Also, this custom build looks amazing! May I suggest a dedicated shelf for all your future projects?
@BastAbst3 жыл бұрын
Oh, I have to agree there, a shelf for that would be awesome. Also, a Fumina custom for Halloween? The head sculpt sure does fit for that really well already. :v
@Leonidas_L._Lionheart3 жыл бұрын
I saw that horrifying review... and I'm still scarred from it xD But I must admit, I was also scarred from it's appearance in the actual show, it was pure CRINGE! xD
@BNuts3 жыл бұрын
The Figure-rise Standard is out. You don't think..?
@gearbot10013 жыл бұрын
I really like these videos. As someone else who is trying to go through customizing his gunpla for once it’s nice to see someone else’s also struggling from similar problems and learn from that and know I’m not the only one out there.
@Gatoszilla783 жыл бұрын
I understand that when you say it's bad, is for specific gunpla, not all of them or the mecha design itself.
@DiggitySlice3 жыл бұрын
Well yeah, but he's also still wrong sometimes
@557deadpool3 жыл бұрын
He's still objectively wrong
@gundampeacekeeper3 жыл бұрын
Yeah I still think he’s wrong
@Gatoszilla783 жыл бұрын
@@gundampeacekeeper Well, everyone is free to say they opinion
@557deadpool3 жыл бұрын
@@Gatoszilla78 about that, when people say what you said....they don't really mean it
@pongo13423 жыл бұрын
Seeing homeboy not use gloves at 6:26 gave me shivers. Spray paint is is super hard to get off and can take hours of just scraping your skin raw.
@beargarret59203 жыл бұрын
awesome build! water down citadel paints and double or triple layer to prevent brushstrokes
@SOBERABSORBER3 жыл бұрын
Keep going Mecha. As a straight builder you inspire me to start painting and customizing too!
@Agonysis3 жыл бұрын
I know what you mean. I've only ever painted my Kampfer's shotguns and maybe something else, but seeing even Mecha get into it is inspiring me too. Here's to the next custom, bud!
@verdeletdesigns3 жыл бұрын
You did well for the tools you had. For the hard to mask areas, you can use liquid mask by Vallejo. It's a liquid that starts off in a turquise color, and turns see through when dry. It can be peeled off once finished. Give the base paint a day to dry and cure to ensure it does not harm it. I apply with a toothpick, dabbing over the small areas. It's great for chip effects too. You can combine with masking tape too. For the seam lines you have two options. Mod it like you did, or make it a panel like. So for the head, you could have used a knife to scribe a mirror line on the other side. But this can be hard to do with out scribing tape (to protect the plastic from sliding).
@Sibalconb3 жыл бұрын
In my experience is for brush painting, my advice is: sand in between layers with 2000 grit or higher and use thinners water makes the paint stick less and it pools much more
@14cassara3 жыл бұрын
Fill in gaps with some superglue and baking powder. You just have to mix it together and shove it in there. You can even make sprue gloop by melting down old unused model plastics in an old bottle of thin superglue or thin cement. slop your stuff in your gap and sand it down for a perfect seam.
@HeathAldrich3 жыл бұрын
I am sure other people have posted this, but if you take some Tamiya super thin glue and melt down some sprue/runner in it to make a slurry, and you can paint that over the seams to seal and fill them. You can then sand smooth afterwards.
@joemakesmodels66403 жыл бұрын
One thing that is definitely worth doing is chipping. I usually just use a jar or either dark/light gray, get a toothpick and lightly tap onto edges. This helps me hide some of the imperfections. Especially for something like the hazard stripes on this kit. Just to cover up a bit of a shakey masking
@zestystudios75983 жыл бұрын
I love mechas reviews such enthusiasm and love for gunpla but those sketches are just *chefs kiss* a nice cherry on top
@garygcrook3 жыл бұрын
With GW paints your brush strokes showing through is probably because the consistency is wrong, either too thick or too thin. Try putting the paint out on some form of palette, even a small plate or old tile will do, and adding a little water until you get a smooth consistency. It took me years in the 40K hobby to learn that. GW also does this stuff called Liquid Greenstuff which is great for filling narrow gaps due to parts separation. Large gaps would require either Plastic Putty or an epoxy putty like Greenstuff. If you use elastic bands to hold parts together while gluing, it can avoid the problem of parts separation in the first place. Doesn't always work, yet it does help. For sanding awkward areas you can get jewellers sanding boards that are only 3mm across. GW's Contrast paints work really well over metallic paints, providing an almost airbrushed quality to them. Though you will want to use Contrast Medium as well. Contrast paints mixed with their medium are also great for Recess Shading as well. Paints like Tesseract glow would work in recesses where you want to impart a glow-like effect. Like inside engine nozzles, within the barrels of weapons, or possibly even on blades.
@GojiraFan-in9oo3 жыл бұрын
Can you make an IBO custom using Kimaris, Kimaris Trooper, and Kimaris Vidar. With a lot of lances?
@SolarisIgnis3 жыл бұрын
Lance Trooper: [VIDAR]
@louiemachan96673 жыл бұрын
Silver Chariot's MS.
@ominousmecha5003 жыл бұрын
Do it
@christianrivera19463 жыл бұрын
For sealing arms to get rid of seam line try making the connection to the joint clip like so that they snap fit
@casvaldei30313 жыл бұрын
The colors and design legit look awesome
@wolfboi87853 жыл бұрын
thin your paint with water to hide brush strokes. if your getting brush strokes with games workshop paint its because your using it straight out of the pot without thinning first. only the contrast line of paints or their washes should ever be used straight out of the pot. Hope this helps!
@matthewschoen98273 жыл бұрын
Not bad for beginners work, certainly way better than my first custom paint job. I'm not a fan of the sparkly metallic red but all in all, very well done.
@BLAZE0843 жыл бұрын
11:22 Elmer's glue: before putting the clear bits in, slap a coat of glue, let it dry and assemble the parts. After you've primed and fully painted the part just peel off the glue. If you have liquid masking even better. Elmer's glue is a cheap but effective alternative. 17:16 If you had kept the runners, it would've been as simple as snipping a few bits of the same color plastic, put those in a sealable container with enough tamiya cement to submerge them in and melt into a plastic goo. You then simply apply said goo into those seam lines, let it dry and then sand it down. Seam lines, gone! 18:56 Decant your rattle cans. You may have run out of propellant but there's still plenty of paint left in that can. You can load up your airbrush with those leftover spray paints. No waste.
@user-ir1xo9jp8w3 жыл бұрын
This is one of those Gunpla that'll show up in the battlogues either in the background or get prominently featured before being blown up by one of the protagonist suits.
@nuclearkid52013 жыл бұрын
I really enjoyed this one, it's fun to follow the beginning of a customising journey and it's a lot more relevant to the experiences of someone like me, who started customising Gunpla this year, than a video by a master builder and painter (as fun as those are). Plus the end result looks cool, it has a lot of character and there's a definite reason for making it the way you did. 'Trigger Warning' is a great mecha name too.
@azerjinn91603 жыл бұрын
Hanf painting is really fun and really cheap you just need leveling thinner and if you are gonna get an air brush kit anyways you will find that you use the exact same materials Ie Paint Thinner Minus the 100$ airbrush Ive painted many kits All of them by hand and the detail and control is second to none In my humble opinion
@GotNextVideo3 жыл бұрын
TS-82 and TS-84 are indeed special metallic paints. But be sure to use them over a gloss black base coat if you want the full effect.
@yes-lg6ev3 жыл бұрын
i love how he puts so much effort into the sponsors like u could just talk about it while doing something but he puts so much more effort in to it and dank ;) oh yeah, does anyone have any msg anime recommendations
@coleviloria38003 жыл бұрын
For what you learned, defiant improvement from the Hatsune Miku RX-78-2. As for this kit I wouldn’t mix paints from different companies like Gamesworkshop with Tamiya color. I’d love to see you tackle weathering, for that IBO Custom maybe some dust from Mars or scraped paint from fights with other Mobile suits, it’s all up to you but I’m trying to paint more of my kits as well. It’s awesome to be learning to make the kits look better or fit a custom you just want to make.
@ivanmeyers26603 жыл бұрын
6:25 YOU HAVE BLOOD ON YOUR HANDS, YOU MONSTER ! 😂
@SebiOng3 жыл бұрын
if you still see brushtrokes try to add some gw lamhian medium or some air caste thinner to your paint only a small bit then always make sure the paint consistancy is around a bit like gw contrast paints then never stay on one patch always move the brush in a different place
@owenatkin31483 жыл бұрын
You could make pattern masks with a vinyl cutter to hep with the hazard pattern
@DedMan283 жыл бұрын
Word of advice on those annoying seamlines: if superglue can't remove it, lathering it with some epoxy clay, then sanding it flat would work. No need to get those Tamiya epoxyclay boxes; you can get your prep and paint needs via hardware stores. - from a Filipino Gunpla builder who had to make do with going to hardware stores for some Pioneer Epoxyclay, sheets of fine-grit sandpaper, and large cans of Bosny spray paint... XD
@bigfoot944203 жыл бұрын
This has quickly become my favorite channel and I get legit bummed when I have to watch another reviewer... keep it up you're far more entertaining than the rest
@makeshift3073 жыл бұрын
Showing ibo so muchlove when you were showing your gunpla off is sssssssooooo niiiiiice
@nubnce57053 жыл бұрын
I love how if this was the actual color scheme for cherudim, it would constantly get picked out from afar just because of how "LOOK AT ME!" all the colors are lmao
@nazran74973 жыл бұрын
You should take some time customzing rg sinanju. Just using latex glue to keep everything attached. That glue will not ruin plastic finish. And yeah use plastic cement to reinforce the soft plastic part like the shoulder armor connector.
@knwonggmail3 жыл бұрын
sometimes it is not necessary to do the seamless joint .you can chamfer with sand paper at both parts and make a beautify V seam to increase the depth of the kit.
@gumperP3 жыл бұрын
For supplies in Ireland. Marks Models for tamiya paints, sprays and glues, like the cement. MW Hobby Supplies sells paints in Ireland too. Tools, penneys sells nail polishing blocks that work wonders in place of sandpaper. EModels in the UK, scalemodelshop in the UK. Amazon sells bags of 50 of the crocodile clips, and cat scratching boards, three times the size of the smaller branded "hobby" ones. I'm down in Cork and would recommend all of the above!
@ArionRDAW3 жыл бұрын
I recommend the channel Studio G for those who want videos with brief explanation captions and not much talking (except for his talking head Q&As) when it comes to his techniques in customizing gunpla. Tools and tips are all given in his videos. Judging from the quality of his work, it's hard to believe that he only started Gunpla back in January 2020.
@jamesdashwood61623 жыл бұрын
You turned a 2/10 kit in to an 11/10 masterpiece. And its only your 2nd custom? HELL YEAH DUDE. Absolutely LOVE the finished result.
@z3p.hyr_3 жыл бұрын
Just saying, u need thinner in order to hide the brush strokes
@nubnce57053 жыл бұрын
How do you use thinner to hide brush strokes?
@ataerus30663 жыл бұрын
@@nubnce5705 by thinning acrylic paint, its less viscous and flows more readily, when it dries it also retains less of its shape, conforming to where it is applied
@Shimlemons3 жыл бұрын
Even just using water to get a thinner consistency is enough to get rid of brush strokes showing.
@nubnce57053 жыл бұрын
@@ataerus3066 Wow, I've always just used tamiya's acrylics directly without thinning it all this time. Is there a ratio that's recommended for use with hand painting ?
@z3p.hyr_3 жыл бұрын
@@Shimlemons it really depends on the type of paint, but that is true for acrylic
@kaisertech3 жыл бұрын
Binder clips for holding down parts together. Use hobby grade masking tapes Definitely an Airbrush set Plan before executing a project.
@LeafTanuki0093 жыл бұрын
For masking complex part, you can use masking sol.
@kemal25513 жыл бұрын
i made printed reusable sanding sticks, when i go to look for sanding supplies i just go to a hardware store and cut that in strips. usually get around 400, 1000 and 2000 grit. its way cheaper then getting hobby sandpaper
@sykodmon3 жыл бұрын
To avoid brush strokes, thin your paints and/or use a wet pallet. Citadel paints especially black imo streak easy, thin layers work best.
@Zarconium3 жыл бұрын
Tamiya putty would be your best bet for covering seam lines. Also, paint thinning is your friend. Great results nevertheless!
@herbertanthonysuperninjas38033 жыл бұрын
i like the custom videos to be honest
@manuelromero8183 жыл бұрын
Man mecha you did a pretty good job for your second custom paint kit
@2013jal3 жыл бұрын
Quick tip for getting a lot of clips, buy bulk alligator clips off ebay (£3-5ish per 30-40) and then buy bamboo BBQ skewers from the supermarket (tesco 100 for £1) and simply make your own. Also I use lollypop sticks cut to different sizes with wetndry sandpaper stuck to them with 2 sided tape. also cheap :)
@2013jal3 жыл бұрын
oh and also the six-stage nail files from b&m are a god send, 89p for two
@andiqadanialmalsa28483 жыл бұрын
I kinda like the seamlines on the head. Adds to the asymmetry.
@neohybridkai3 жыл бұрын
As a fellow mediocre custom build, I'd say yours is great, never thought you could make a pattern with masking tape, very inspiring. I was so into metallic colors because it resembles car paint but now I'm going matte.
@yomama82123 жыл бұрын
Should see those camo patterns lol
@gerardray12323 жыл бұрын
sealing seamlines is the customizing process I hate the most, that's why I now mainly paint MGs as they dont have many seamlines if there's even any.