HHO 49 plates Hydrogen Generator. Gift at 500k views. Make hho

Hi friends
This video was accidentally deleted when it reached 450k views. It was promised as a gift for 1 million views, but because it had already done almost half, now I give it as a gift when it reaches 500 thousand, so half.
Subscribe, give the best comment, like, share and you can win it.
Thank you very much for your support and please keep doing it: / fantotzyy
HHO this hydrogen generator consists of 49 stainless steel plates but is not 316L stainless steel. It is a weaker stainless steel. I used a 12 V battery and it consumes about 11-14 amps and produces 2 - 2.5 L / min (lpm) of hho. I used distilled water and potassium hydroxide and got a good electrolysis. The result of the construction of this hydrogen generator was satisfactory. This complete hydrogen putty can be used on any car that wants to save fuel.
It's a dry cell. A larger hydrogen generator. My biggest hydrogen generator. The one that produces the most fuel in the water.
This project can be expanded to produce more free hydrogen with more free energy-producing solar panels. Or with a mini wind turbine.
Thank you very much
For support and please continue to comment, like and subscribe. / fantotzyy
Make hho

[@Inventive101]

I give it as a gift🎁 Subscribe Give the best comment and like!👍👍

[@Inventive101]

This video was accidentally deleted when it reached 450k views. It was promised as a gift for 1 million views, but because it had already done almost half, now I give it as a gift when it reaches 500 k views, so half. Subscribe, give the best comment, like, share and you can win it.

[@danielspataru1781]

Salutare prietene! Frumoasă jucăria asta, ,cam câți volți/, amperi absoarbe la cei doi litri și ceva pe minut??? Cine știe poate cade norocul pe mine, să fiu câștigătorul..... Glumeam 😁 Succes 👍

[@Inventive101]

@@danielspataru1781 Salutare!!! De ce sa Glumești, mi-ar place forte mult.12 V 12 amperi

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [ HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@abdullahassan2577]

Hi Can I have your contact info.

[@Inventive101]

I apologize for the mess in the playlist, I will make an order to find what you are looking for easier

[@hendrosilitonga]

Brilian desain broo.... Simple yet elagant build. Bahasa Indonesia ( disainnya bener bener mantab broo... Cara buatnya juga gampang bangat sumpah.) tq brooo

[@nasrudinudin6793]

it's really easy to practice at home

[@hanny4515]

he brooo can add knowledge and the ingredients are easy to make

[@dara7733]

for the size for a 49 plate HHO Hydrogen Generator, you need a size so how many sizes do you need?

[@James-yg8el]

HHO 49 plates Hydrogen Generator can really be used for personal, brooo

[@chyntia318]

it's okay if it's really easy to get permission to practice at home huh?

[@deadbabiesinvomit]

I wish people knew we don't need anyone telling us how to live. To live in peace and harmony, with out destroying the planet. I have seen so many tiny little generators. Too small. And not practical. We need to leave society and return back to the natural order of time and space, to survive and evolve as we are supposed to in this magic times. I would love to win the prize. But, even if I don't. This is a gold post to me. Thankyou!

[@wolfgangboettcher3126]

Und eine Kraft in der Technik ist doch was gutes

[@Inventive101]

🙏👍

[@wolfgangboettcher3126]

Kenne ich

[@Yasinzaii]

I don't think you are separating oxygen from hydrogen. Bot of the gasses are present in the same container making it a bomb.

[@AircondGypsy]

yes safety protocols must be used in these systems. as with any other. In this you must use a flashback arrestor. another inlin bubbler serves this purpose well. also this gas must be diluted by a ratio of around 5 to 1 with normal air before it gets introduced to an internal combustion engine or you are correct ...it will go BANG 1 last time and you would NOT want to be near it when it did that! But done correctly this system can produce a nice usable gas with which to run an engine.

[@10peteo]

This system doesn't hold enough volume to cause much damage if the hho got ignited prematurely, blown out hoses would be my guess.

[@tehnicianenergetic9794]

CUM CREZI ATUNCI CA SE FACE BOMBA CU HIDROGEN ?

[@jaiteducation9761]

He is making water gas

[@brianpreston8483]

​@@jaiteducation9761 yes thats why they call it hydrogen

[@MarkKlokeid]

Best Comment in truth is this is the future and you are saving the planet. I’m married and travel between China and my home in Canada. This gift would change my future by making it affordable to the world with the Earth as my motivation. Bless you and your inspirational creative life changing video!!! Pick me to change the world with you!!!

[@ullap.6689]

If you are interested :there ist another Video in German language. It is called "Sandheizung und Stirlingmotor". It Shows more safety. I also think it is the future. All the best for you. Good luck!

[@hhogasproduction5081]

Thanks sir. Your experience is good for our future of a good information to the best way of a good job working in a hho gas production.thanks again thank u

[@Inventive101]

Thank you friends, again and again and again!!!!

[@Inventive101]

The old and the strongest!!!

[@MrOdsweetness]

This is one of the best demonstrations I've seen of a big HHO I really enjoy this video I would love to see a lot more!!! this unit would be amazing in my truck it would be a massive upgrade!!!!!

[@Inventive101]

Thank you very much!

[@Inventive101]

After I accidentally deleted an error the original video my channel went very bad, if the views start to increase again maybe someone will win this generator

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@wedgephrr1065]

ขอบคุณมากที่คุณแบ่งปันความรู้

[@guoxiangliao]

我装在卡车上了，油耗并没有减少，气体加大动力变弱了，但是可以清理积碳！I installed it in my truck and the gas mileage didn't decrease. The gas becomes weaker as it increases, but the carbon deposits can be cleaned!

[@rockpadstudios]

it takes more energy to create O2 and H so this is only useful if you have excess energy like solar. It is cheaper (and safer) to use battery storage.

[@Inventive101]

Let my friends and supporters promote this video. Share and like and comment please

[@jaysonlanders1222]

I would love to hook that up to my truck to see if I could improve my mileage.

[@Inventive101]

This is really suitable for a truck

[@jaysonlanders1222]

I am running a 15 liter Cummings. I figured I would need 2Lpm or better HHO to see any noticeable improvement.

[@Inventive101]

@@jaysonlanders1222 I think 2 lpm is more than enough. But I don't know much about big cars, but I think so

[@lawrencemiller7924]

@@Inventive101 how big do I need to run a 2002 5.3 liter LS Chevy suburban ?

[@Inventive101]

@@lawrencemiller7924 what is diesel or gasoline

[@nicksancho5708]

Very cool. Ps Best comment. Liked and subbed

[@Inventive101]

Thank you very much

[@Inventive101]

I installed such a generator on my past 10 years ago. now I took it out because I started the full hho project

[@mahfuoz63solidworks3]

يمكن تحويل الهيدروجين إلى وقود اشبه بالبنزين. ضع فحم خشب في وعاء مغلق تماما ثم ضع فتحة لدخول الهيدروجين منه ثم فتحة لكي يخرج منها السائل الذي ينشئ من عملية مزج الهيدروجين بالكربون لتفادي التصاق الهيدروجين بالفحم ضع جد عالي موجب الشحنة في وعاء الفحم ثم شغل هذا الجهاز الذي صنعته إنتظر فترة سترة كيف يسيل الوقود من وعاء الفحم.

[@Inventive101]

👍

[@peaceknight5485]

Very effective Generator and cleanly made. Very bright idea. Congratulations and do not let your discovery stalles on a shelve somewhere.

[@NiceChange]

Wow!!! Simplicity at its finest... fantastic engineering ❤️❤️❤️❤️❤️

[@Inventive101]

Thank you very much

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@thegrantdanielsband]

Its people like you that make a difference in this world!!! we need this clean energy for the future cars and homes and leave the dirty fossil fuels and electric in the past!!! Time for a change lets all do this Cheers :-)

[@Inventive101]

Thanks, I'll leave it at that, "they, the top ones" wouldn't want that. Cheers mate

[@darylgarrett1324]

2 inventors mastered this tech for automobiles and were murdered after submitting the patent.

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@kaspervestergaard2383]

@@darylgarrett1324 It's not that foolproof anyways. Takes alot of power to generate hydrogen-

[@tronoses7774]

Well this is the best Channel on KZbin for hydrogen generators thx love this content.

[@Inventive101]

Thank you very much! And I love you 🙏👍

[@jaysonlanders1222]

Again as always, a clean, simple yet elegant build. 👏

[@Inventive101]

OOO. Thank you very much

[@Inventive101]

I want another like 😁🤣I was kidding, thank you very much

[@stephenbuchholz3079]

Would you send specs?

[@Inventive101]

@@stephenbuchholz3079 Surely this is how I prepare a video with all the sketches

[@DexterityRo]

@@Inventive101 Va salut cu respect! Puteți sa îmi dați și mie schița/planul? As vrea sa construiesc și eu. Mulțumesc!

[@olegsjr]

Like e compartindo. bom trabalho!!!

[@Inventive101]

Muito obrigado, Sempre ao seu lado !!

[@vecteurguy]

Bonjour bro merci à toi encore pour cette vidéo tu fais un très bon travail j ai beaucoup appris de toi bonne continuation j apprécie toutes tes vidéos c est très instructeurs je suis très de content de faire parti de tes fans et resterai pour toujours 👌👌👌👌👏👏👏👏💪💪💪🤝🤝🤝

[@Inventive101]

Le plaisir est de mon côté frère ! Merci beaucoup

[@kunzaxe]

Electrical sparks and Hydrogen MY MAN

[@Inventive101]

Cheers mate!

[@Inventive101]

Subscribe, like and comment .... next step 50k subscribers 🙏🙏🙏😜

[@rogermew5578]

Hydrogen is going to be the way to go, for heating the house and running the car and better yet "gas stations" could even produce it themselves from solar panels. Battery electric is a con but good for milk floats or bread vans.

[@psycronizer]

well, it's good to see how easily convinced people are after only a quick amateur's video on the topic. Hey I've got this other vid about just giving me cash just cos I'm a really nice guy you wanna see it ?

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@SleepyBowHunter]

Brilliant design! You remind me of a couple close friends I had who loved tinkering with anything mechanical they got their hands on from cars, appliances,. . . I wish I possessed that same curiosity/drive because they, like yourself, are the people who create & fix the electronic/mechanical things that we use every day that make our lives much easier/enjoyable. Thank you for posting this video and giving me a glimpse at the talent/ingenuity that I wish I had. 🙂 👍

[@Inventive101]

Thank you very much!

[@robertszymanski717]

With the cost of gas $7.00 a gallon...I'm all for it! Hydrogen powered cars! We need brains to create hydrogen cars and batteries.... Any 7th grader in science class can make hydrogen with 2 test tubes upside down in beakers of water with wires inside making hydrogen bubbles....

[@gnanamoorthir6645]

Sir,I am from india.this kit how many ampiyar takes.reply please

[@JavierDrWeld]

Your designs are getting better and better, thanks

[@Inventive101]

Thanks!

[@luminitapricop2467]

Nemaipomenit bravo...👍

[@Inventive101]

😁 mulțumesc

[@smartgaming3199]

Cheap and future energy, thanks

[@Inventive101]

Thanks buddy

[@louisdreyer7523]

It always fascinate me. Like your idea. I ll give you 100%. Good job!!

[@Inventive101]

Thank you very much

[@TAKinPoland]

You are doing a great work for humanity. One day you will be remembered for you great revolutionary work. All the best for you future...

[@Inventive101]

Thank you very much! Cheers mate

[@hhohho4167]

Great hho generator

[@Inventive101]

Wonderful fans!!🙏👍❤️

[@MarkKlokeid]

I am Canadian in China in Shenzhen a lot where if you give it to me I could replicate it and put it to good use around the world. Great Job. Send me the plans to do so!!!! Yeahhhhh

[@aravinthraj3341]

you are really good at this. I started to make 11 plate dry cell for my bike. your videos are very informative. thanks 🙏🏽

[@Inventive101]

Glad you like! Thank you very much! If you need help write me!

[@Inventive101]

I'm curious how strong a flame would be with this generator. I will do that

[@aravinthraj3341]

@@Inventive101 definitely I will send you the video once I made it. I must will write whenever I have doubt. thanks for your helping mind 💖

[@aravinthraj3341]

@@Inventive101 initially I made small 4 plate wet cell generator ( 2 positive ,2 negative) by my curiosity. I added table salt to increase the conductivity of water. I was happy to see the blue flame. but it was very inefficient. after watching your videos I got some clear ideas and knowledge of HHO. so I'm making 11 plate dry cell generator. I will send the video of my final result 🙂 thanks for sharing your knowledge and skills 💖

[@Inventive101]

@@aravinthraj3341 Good luck in what you're doing, I'm waiting for news. Thank you

[@TheMiguelcastelo]

Great and detailed video, this gift is mine

[@Inventive101]

If this video goes well again you can be a big winner !!!

[@Inventive101]

Let my friends and supporters promote this video. Share and like and comment please

[@steffankaizer]

this is a valid build but just one question why do the rods have to go through the plates? just have the rods outside the plates and safe yourself from drilling 612 holes for nothing

[@Inventive101]

Thanks. They don't have to go through the plates, but they have a higher resistance, you can tighten them more so that the lids suffer from something ... I have different models and no holes in the plates. I didn't drill them with a drill, I made them with a laser very easily and quickly

[@kasirreceh1730]

i like you video and than i create too

[@Inventive101]

Thank you very much! And success. If you need help to start writing

[@Inventive101]

🙏👍👍👍

[@justicesomeday]

Merci beaucoup....J'en ai besoin...✌️💓🎩

[@Inventive101]

🙏🙏❤❤

[@Inventive101]

Subscribe, like and comment .... next step 50k subscribers 🙏🙏🙏😜

[@zahidlatif874]

Thumbs up...simply excellent 👍

[@WazzyCabbage]

hho is a wonderful gas that gives much excitement to those who love loud explosions ,from rocket bottles to bottles filled and exploded carefully with electronic devices ...

[@Inventive101]

Yes Yes Yes! Thank you very much

[@newtech8136]

VERY VERY GOOD YOUR PROJECT, FRIEND. BUT YOU SAID stainless steel plates but is not 316L stainless stee, BUT YOU NOT SAID WHAT IS. CAN YOU SAY NOW, PLEASE? THANKS

[@Inventive101]

I apologize for the delay in answering, it's 304 stainless steel but I don't recommend it. cheers mate

[@danw1955]

I built a custom 11 plate 8"x8" HHO 'dry cell' generator like this, years ago, that was making well over 3L. per minute at 13.5v. and 30 amps. I used a custom volt/amp regulator and an accelerator pedal switch to maintain a constant draw as the cell warmed up. The pedal switch would cut the generator down to 5 amps at idle, so as not to overrun the carbs. I used it in a '71 VW Beetle with a modified 1685cc. dual-port with dual carbs, mild cam, and big valves. Without HHO, it averaged about 28-30 mpg. and with HHO, it averaged about 34-38 mpg. depending on road conditions and speed. 65-70 mph. seemed to be the sweet spot, since the cam started to work really well at that speed.😉 *EDIT:* Just for the record, you'd have to produce a massive amount of HHO to actually run an engine, but a smaller amount works wonders to greatly increase your gas (or diesel) mileage, by acting as a catalyst to burn more of the fuel. Also, carbureted vehicles tend to respond much better than EFI, and are easier and cheaper to set up.👍

[@peppernickelly]

What about throwing some solar panels on the roof and a couple LiFePo in the trunk? With 400 watts of solar power, you could store probably 2400 watts in the batteries to add a buffer for HHO generation.

[@danw1955]

@@peppernickelly That's a lot of complexity for a few watts of extra power. The average modern car alternator will produce 100+ amps at idle. My old Bug, had an alternator conversion which was rated at 60 amps, so it wasn't hurting for power, even driving the HHO generator @30amps (about the same current as a large heater motor).

[@jimmysparks315]

Did you rejet the carburetors ?

[@danw1955]

@@jimmysparks315 No, I didn't have to, actually. The HHO enhances the combustion of the available fuel. It's not like an altitude change that would richen or lean the mixture as you go up or down in altitude.

[@jimmysparks315]

@@danw1955 A few years ago I messages every single company selling HHO kits on ebay claiming all sorts of impressive gains...I asked them all if they had any before & after dyno charts backing up their claims... predictably not 1 responded with anything, suggesting to me they were all selling snake oil.

[@adengustafson9279]

Use graphite plates instead of stainless. Should triple the efficiency

[@Inventive101]

Thanks, I'll do that too

[@kamarajumadhunapantula7759]

Greatest video, please send us the sketches 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽

[@kostasakagasvlings8318]

JUST WOW!WHAT A BRILLIANT IDEA! WELL DONE

[@rjlinnovations1516]

Excellent ideas and processing to separate hydrogen from H20. Watching and fully supported from Canada 🇨🇦

[@mohammadrezanazari8553]

Hello my friend / What is your opinion about the method of producing hydrogen with photocatalysts? Especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@Inventive101]

It does not separate the gases but I also have two generators that separate them

[@Inventive101]

This video has reached 450k views, 5k likes and 1k messages! It was going very well, let's make it work again please

[@stefank.4345]

Why are different rubbers mounted between the plates. The contact pressure is different. Why are the plates not ground clean (250 paper)?

[@Inventive101]

I use a 2.5 mm gasket but tighten them until they reach 2 mm

[@Inventive101]

this hydrogen generator consists of 49 stainless steel plates but is not 316L stainless steel.

[@ChristmasEve777]

Hi again!! I've seen some of your other videos, and commented. I'm still dumbfounded by your rate of production for a single cell (I see your sets of plates were all connected in parallel via that pair of rods). The splitting of water, or any molecules, from electricity should be confined to produce an amount of its constituents that is directly proportional to the input current. That is, Faraday's constant (96,485 coulombs) is required to produce one mole of electrons, and it takes twice that number to produce that many hydrogen molecules because it takes 2 electrons to split an H2O molecule. From this, we know that 192970 coulombs (or 192970 amp-seconds) are required to produce one mole of hydrogen, which is 22.4 L at STP, or around 24 L at room temperature. So, from this, we can calculate that it would take a single electrolytic cell 134 amps (regardless of the voltage) to produce 1 LPM of hydrogen (192970 / 60 seconds in a minute / 24L). Since you were measuring the flow of the two gasses mixed together (HHO), you can divide this by 1.5, but you still end up with 89.3 amps. Now, your flow meter showed 2 LPM so that would require over 178 amps. Are you sure your water wasn't also boiling? Or, is your flow meter working correctly? 2LPM is impossible at 14 amps unless you had 12 to 13 electrolytic cells connected in series (not parallel) and that configuration would require at least 22.5 volts at 14 amps.

[@AircondGypsy]

do your figures account for the change in the resistance of the fluid by the addition of electrolyte? I ask because I do not know the answer.

[@Ken-rk3by]

I love it when someone is yapping away and they don't have a clue of what they are talking about !!!

[@ChristmasEve777]

@@Ken-rk3by Yes, agreed, so please stop yapping! I build electrolyzers for a living and minored in electrochemistry so, certainly, you don't mean me.

[@Ken-rk3by]

@@ChristmasEve777 -- I don't know what a mole is but all the HHO generators are run in parallel so each cell gets around 2 volts for the most efficient use of a 12-volt DC. system. The most efficient cell has 5 neutral plates between the positive and negative plates. But you need a PWM to force more amps through the cells. Now if you don't have a PWM and say it's a 6 cell system on 12 volts, each cell gets 2 volts between each plate in each cell but you can only use between 10 to 13 amps for the whole unit. I have a 10 by 10 inch 6 cell unit and that is all I can push through it. So what the guys are doing now is eliminating neutral plates to bump up the voltages between the plates. But the problem is, it starts heating up the water so now you start getting water vapor with the gas, and that you don't want. I have used my unit for 3 years now and I get about 10% better millage using it. It keeps the engine so clean that the oil looks brand new after a year of driving but I change it anyway because I know it breaks down over time. What I do is run the HHO hose with a flashback arrestor just inside the air intake so the computer senses it and adjusts for it. One other thing is it works great in diesel engines because most older ones are low RPM.

[@ChristmasEve777]

​@@Ken-rk3by It's been a while since I saw this video but, from reading my original post, it sounds like the cells are, indeed, in parallel which is actually very INEFFICIENT at 12V. What you described in the beginning of your comment is absolutely correct except that is a series of cells. When you have neutral plates in between calls that are not directly connected to the power source, that's series, not parallel. If you have a pair of rods connecting all the cells together and run 12V through them, that's terrible efficiency and, hence, much heat is produced. The key is (like you alluded to) to keep each cell near 2V (you said 12v / 6 cells). The ones I make run at 2V/cell and they stay fairly cool even after long periods of time. But besides being inefficient, connecting all cells together with a pair of conduits effectively creates one giant cell. So your production rate will not be what you think, but a fraction of it. If you have, say, 7 cells in parallel your production rate is just a function of the current being drawn, regardless of voltage. If you have 7 cells in series (neutral plates involved), your production rate is proportionate to the current being drawn TIMES 7 (albeit it will certainly pull less current than the parallel version). This is just an example - I didn't rewatch the video. But the I think my original point was that an (effectively) single cell couldn't possibly have that rate of production at the current he said.

[@dr.projectx5142]

Looking to making one to run a torch for metal work, that will be fantastic.

[@Inventive101]

You can make one yourself

[@stefanpricop4717]

Foarte bine.excelent chiar

[@Inventive101]

Oooo, mulțumesc foarte mult!

[@kenneththrasher9241]

A remarkable project. Great work!

[@Inventive101]

Thank you very much

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@abc-nm4gg]

I like your simple design and that you're open source. Keep it up.

[@paolonateri1280]

No se no

[@ct2iib]

Everything is very well done except for the connection accessories to the generator, these must be made of PVC or PE so as not to be destroyed by corrosion.

[@GeneMyers14854]

Could anybody even understand a word of what he said there ain't no way to understand he's in the wrong country he needs to post this in his country so people can understand it oh my goodness

[@myownpath8022]

super tare salutari din spania ce te bucura cand auzi un roman pe youtube 😁😁

[@Inventive101]

Salutare, mulțumesc mult!

[@Inventive101]

🙏

[@rj8372]

Very clean & neat. Good job man.

[@Inventive101]

Thanks

[@danielelliott7007]

I love this, super clean build. All my mind can thinking about is hydrogen recently am going to build one hopefully very soon my work shop is on the way to completion this is going to be q project of mine very interesting stuff...

[@enzoreyes702]

Sir, please enlighten me on this one. Will those black rubbers burn if you boil it too much or not? Im just blown away by this design. Really great!

[@zephyrtolliver4113]

The water is not boiling, the temp stays at room temperature. It is splitting the water molecules into HHO gas

[@overthenever4262]

👍

[@Inventive101]

🙏🙏

[@emanuelferreira4188]

Parabéns, excelente projeto... 👏👏👏👏👏

[@Inventive101]

Muito obrigado

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@floranape913]

Gracias prof.exito

[@Inventive101]

🙏🙏

[@SAVETHEPLANET-KILL-A-GLOBALIST]

Beautiful, amazing!

[@Inventive101]

Thanks

[@murguflorin4046]

The best!

[@Inventive101]

Thanks

[@Inventive101]

thanks buddy

[@eviwasito1519]

Excellent Bro...! God bless you

[@yparadkar]

Good job bro Appreciate from India 😁😁

[@Inventive101]

Thank you very much! Greetings from Greece, soon from Romania

[@user-wv7vd4qf7c]

Nice

[@dennisking3638]

Thank you thank you thank you... can you please demonstrate hooking up to a car

[@Inventive101]

Sure

[@Inventive101]

I'll send you right away

[@Inventive101]

kzbin.info/www/bejne/fKGmYml8rpmXjKM

[@dennisking3638]

@@Inventive101 thank you so very much I appreciate you for sharing your knowledge to all of us because we definitely need it... and stay blessed🙌🙌🙌 and strong💪💪💪

[@dalichonet]

So far so good but you give no numbers, how many volts and amps can you apply for how many litters of HH a minute. THEN, it would be very useful for millions of viewers to get all details, measurements etc... THEN get to compress the HH in a traditional propane or butane high pressure reservoir to burn the gas in a modified wood stove. Heat homes for free

[@jb-xc4oh]

How do you propose to heat your home for free.

[@Inventive101]

Subscribe, like and comment .... next step 50k subscribers 🙏🙏🙏😜

[@Sirisley]

Que Bueno, Se Estan Despertando!!!! 😇😇😇

[@Inventive101]

¿Quién? vecinos?

[@user-xu9di1uj8m]

Hello my friend.I want to ask how much current your electrolyzer consumes at 12 V.And how much hydrogen is released? What metal are the electrodes made from? Thanks

[@Inventive101]

Hi, it consumes somewhere at 12-15 amps and the result is crl from the video

[@son-of-a-gun]

An experiment done very well. The question remains what do with the hho gas. Fuel an combustion engine with it does not make sense, since the electrical energy needed to generate the hho exceeds the energy of the hho. Put it in your car and mix it up with gas for better combustion is an esoteric myth I'm affraid.. But you could use it in a small torch for welding tiny objects e.g. juwels

[@ByeTech]

I like this. He knows what he's doing because he put the output in water for the test. If not he'd end up with an explosion.

[@Inventive101]

A very big explosion at 2 liters per minute. I suffered at the beginning of the experiments and explosions

[@ciprianvlagera1374]

Super

[@Inventive101]

Thank you very much

[@andipurnomo742]

Thanks for the information boss

[@Inventive101]

🙏

[@titochannel221]

Excellente 👍

[@Inventive101]

Thank you very much

[@memba759]

Thank you so much. I saw a video in tiktok and followed the link here. Really appreciate it 🙏💪

[@explore4178]

Very amazing ... the way you made it simple and efficient.

[@Inventive101]

Thanks

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@axemaister]

Ai incercat sa mergi doar cu hidrogenul produs de generator fara sa adaugi benzina/motorina? Se produce destul incat sa intretina arderea in cilindru?

[@Inventive101]

Nu am încercat dar o voi face

[@yetersizbakiye8164]

Very nice

[@Inventive101]

Thanks

[@yetersizbakiye8164]

@@Inventive101 👍👍👍

[@paulooliveira1243]

Bom dia gostei da informação 👍.

[@Inventive101]

Thanks

[@Inventive101]

Olá! Estou feliz, muito bem

[@jefflinke2772]

Now that was cool. Every high school in the world should teach this.

[@Inventive101]

I teach 😁😁

[@MOHITKUMAR-of5xz]

Thank you so much for this informative video. As a beginner, i dont know the name of many components you used for making the generator. Can you please mention the name of components?. Thank!

[@mamadoumalalbalde2442]

It's good very good tank you

[@Inventive101]

Thank you

[@trikuntarto8006]

Thanks a lots for sharing this inspiring video Sir..I am so keen to see more other inventions...👍👍👍

[@Inventive101]

Thank you very much

[@mohammadrezanazari8553]

Hi my friend/ what is your opinion about the method of producing hydrogen with photocatalysts? especially this method in the following link. kzbin.info/www/bejne/h6TChoKAjq-cnNk

[@wikechrisw5210]

Very interesting design it would be great to see it powering a motor to see MPH

[@Inventive101]

Thanks, maybe in the future

[@masoudtehrani2954]

very very good

[@Inventive101]

Thank you very much

[@user-ox8zs8hy8s]

good ideas.. you are great

[@MarkKlokeid]

Adding a battery and motor with battery storage would put the cherry on the design. Help me do it

[@user-wv7vd4qf7c]

The best

[@Inventive101]

Thanks

[@paulorogerio2111]

Ótimo trabalho

[@josesveloso4453]

Ideia genial . Você é na verdade um cara inteligentissimo . Esse é o verdadeiro gerador de hidrogenio . Olha a rima hum génio fabrica hum gerador de hidrogenio.

[@Inventive101]

Muito obrigado! bons elogios, não sou realmente um gênio, mas gosto de jogar 🙏

[@Inventive101]

Thank you very much to all my supporters

[@tronoses7774]

I bet if it is smaller it will run on a 3.7v battery. I would like to see you build one.

[@Inventive101]

I'm glad you give me ideas, maybe I'll have time to do this

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [ HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@Inventive101]

This generator is made of boards from other generators over 10 years old

[@ressamendy]

Hello.... 10 kva generators consume up to 3 liters of fuel per hour. In a hydrogen electrolysis device that will feed such a generator, what would be the average measurements and what would the volt+current values be?

[@raloed.363]

its takes 1.23 watts to make 0.0105 L/min of HHO. A 10Kva generator will need more than 10Kva of power turning the shaft for the generator to create 10Kva of power. So if the generators converts fuel to electricity at an efficiency of 50% then you will need 20kva worth of gas which is around 170 L/min. However, by mixing the HHO gas with noncombustible ionized gasses, the energy output of the gas can be increased up to three folds. Also using some form of LC resonant circuit you can generate HHO gas yielding more gas than the power used to make the gas.

[@Hydrogen4Health]

I think I'm going to try this. A free generator for views is genius!

[@Inventive101]

Thanks, but it didn't work out