high speed infill tuning

Рет қаралды 2,698

PIRACER VELOCIRAPTOR

Күн бұрын

Пікірлер: 38

@felixbreidenstein2950 6 ай бұрын

Printer at 1:02 was like "Okay, now send it"

@The_Chillguy7 6 ай бұрын

your first layer is faster then my hole print

@sesaw4 6 ай бұрын

Your own first layer is faster than your whole print 😉

@butre. 6 ай бұрын

that's certainly a way to say that

@Alan_Jr 6 ай бұрын

Crazy fast, amazing machine.

@jasongooden917 6 ай бұрын

this printer looks industrial AF

@Heywood-----Jablomeh 6 ай бұрын

I cant help but feel like your printer listens to Slayer while it prints! Seems like maybe expendible youth is playing on its main board!!

@jamesm3268 6 ай бұрын

How are you liking the chube compared to the Goliath? From ambient to 270 how long does it take to heat up? Lastly do you have a link to that sock material I'd like to put the same on my magnum+. Looking great as always and the new chube looks shorter so will have better balance it seems.

@MrRocksalt 6 ай бұрын

There is something I really like about goliath.. the mount.. The mount of goliath is superior, IMO, because the assembly is more rigid having the flange of the hotend bolt directly. The lighter heat zone heats faster with same wattage so it's like a flywheel mass.. looses heat faster with less mass.. but also heats faster.. so almost the same? Then the printer can throw the mass around because it's less. But longevity, Chube is more industrial. I am having some issues with retraction or corners, not sure the cause, but it's not as clean as the prints coming off Goliath. Maybe I need to tune more or maybe there is some effect from the 4.5mm longer melt zone or.. not sure.. maybe even more extruder pressure needed. Something is different, just not sure yet what.

@MrRocksalt 6 ай бұрын

This is the type, I had some at the house, not sure the diameter.. measure yours and get a little smaller, expands well. www.amazon.com/Silicone-Fiberglass-Automotive-Electrical-Wiring-Red/dp/B09MZGN7NX/ref=asc_df_B09MZGN7NX/?tag=hyprod-20&linkCode=df0&hvadid=693372513071&hvpos=&hvnetw=g&hvrand=12524157033090248825&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027849&hvtargid=pla-1955203017584&mcid=75151690f48238878e3ed8d9e353feb4&gad_source=1&th=1

@HonestBrothers 6 ай бұрын

Variable extrusion multipler. I like this. Can you give me more info? Also why are you not on 2804s?

@MrRocksalt 6 ай бұрын

I like to run lower speeds with less VFA. Super Slicer can vary the extrusion based on speed in the extruder section.

@reyalPRON 6 ай бұрын

mmmm stepper music!! im diggin it buddy! kudos on the cooling solution ;) did a similar solution for an old project back in the days, pc fan or wifes hairdryer?

@802Garage 6 ай бұрын

Have you tried combined infill as well, or would that push the extrusion rate too high? Insane!

@MrRocksalt 6 ай бұрын

I had that setting on a year ago or so.. caused a lot of problems with cooling and flow. Took me a bit to figure out that was causing it. For that reason, I don't use it. There is plenty of speed here to not need it IMO.

@802Garage 6 ай бұрын

@@MrRocksalt Definitely, hahaha. More just a curiosity. Awesome stuff!

@JSparrowist 6 ай бұрын

printer go BRRRRRRRRRR BRRRRRRRRRR BRRRRRRRRRRRR!!!!!!!!!!!!!!!!!!!!!!!

@joe_duck 6 ай бұрын

Brrrrrr

@digital0785 6 ай бұрын

wait.. how do you do speed based flow? that would be awesome because when i do 200mm's on a .6 nozzle in a bambu throat it'll get some under extrusion even with hot temps and an orbiter extruder which in theory should be fine this is something i've wanted for a while

@MrRocksalt 6 ай бұрын

Depends on the slicer. SS has a place to set the curve, in the extruder section. Cura has it built in, Orca, who knows, probably not there as based on PS.

@_Xantras_ 6 ай бұрын

Kinda sad how Chube has this big titanium (or is is stainless steel ?) shield around its meltzone, suposed to fill the role of a sock, only for it to have holes in it

@MrRocksalt 6 ай бұрын

The upper shroud is supposed to be titanium and the lower stainless steel. I changed the lower to TI, didn't make much difference. The upper shroud is a structural piece, why they made holes was maybe to let it shed heat and not put it all to the heat synk. But.. this allows PC air to hit the copper. If printing sane speeds needs only sane cooling.. so the hotend will work that way with no sock.

@occasionalriders1885 6 ай бұрын

What motor and board do you use ? Beautiful machine

@MrRocksalt 6 ай бұрын

These are LD0 2504's with TMC5160's @ 48V, running on Octopus pro 1.1 w/H723

@occasionalriders1885 6 ай бұрын

@@MrRocksalt no problem with vfa? I'm stuck between 2004 and 2504, actually i prefer 2004 cause i dont want to go crazy fast but... So you are running stepstick and not external 5160 right?

@MrRocksalt 6 ай бұрын

@@occasionalriders1885 TMC5160 step sticks, internal. 2504's will VFA at 100mms.. well... I tested them for vibration and they have several speeds they resonate at. above 200 they are fine. 100-200 have a few areas they resonate.

@kagancengiz 6 ай бұрын

do you recommend using a server fan as a print cooling fan?

@MrRocksalt 6 ай бұрын

I do not have that answer.. I hear that enclosed chamber of 85C+ is hard to cool with CPAP WS7040, but I have no experience at that chamber temp. The twin server fans toss ~60CFM combined. Hard to argue that it's not better. But you also have the weight and a gyro effect. The CPAP hose is not rated for high chamber temps. Maybe, maybe not.. But if you really wanted more CFM can use a bigger CPAP blower and a hose rated for those temps.

@kagancengiz 6 ай бұрын

@@MrRocksalt actually i don't have a enclouser but i am printing with pla and pla is very Hard to cool and second hand Server fans are very cheap

@MrRocksalt 6 ай бұрын

@@kagancengiz For me, PLA not a problem with WS7040 and a good duct. I have some videos on this channel with some pla. I have to move pretty quick to under cool it with typical .2 layer height.