Hikvision 3rd Gen Acusense Motion Detection Human and Vehicle Recognition Setup for Notifications

Human and Vehicle Recognition and Notifications on Hikvision 3rd Generation Acusense DVR's. Including Push Notifications to Mobile Devices! 👍✅

[@scottdickenson6825]

Can this be set up on multiple cameras on this dvr?? As the one i have at the moment only allows smart event to be set up on 1 camera.

[@CCTVSystemsUK]

Yes, human and vehicle recognition can be set on all the cameras through the motion detection menu tab or on four cameras through the intrusion detection menu tab on the HUHI models. Only facial recognition is limited to one camera as it is very heavy on the DVR's resources. Hope this helps, Regards Paul CCTV Systems UK @CCTVSystemsUK

[@scottdickenson6825]

@@CCTVSystemsUK thankyou paul i need one of these machines

[@scottdickenson6825]

@@CCTVSystemsUK is this the one with alarm inputs and outputs? Thanks.

[@gian0giorg]

what is the maximum distance of human Recognition? Is this affected by the camera lens? Is there a difference between 2,8mm and 3,6 or 4mm lens?

[@ritish25]

Hi how to remove the beeping sound on the dvd thanks

[@leonardofranca979]

What camera is used here

[@dysonman2009]

Hi is this a ip camera

[@CCTVSystemsUK]

Hi, No the camera in this video was a 2MP TVI coax camera. The human and vehicle analytics were provided by the DVR itself. Hope this helps. Regards, Paul CCTV Systems UK

[@Chavacano]

Hi I own a Colorvu camera with the latest firmware update which allows the LED light to trigger on an event. The camera is connected to an IDS series deepmind NVR which has AI built into it. The options on the NVR includes more option and features such as human and vehicle detection which the Colorvu camera does not have. I want to use the Intrusion Event feature on the NVR for my camera but when I do it does not light up the LED - it does not trigger it. But when I use the cameras intrusion event feature natively on the camera it works, down side being that I dont have the option for human and vehicle detection on the camera option.....can you please do a video on this or is you have answer please. Thank you.

[@revo2maxx]

Did you figure it out? IF you didn't there should be a linkage mode within your recorder that lets you link to your cameras alarm.. ON the alarm area of the Recorder it should also let you access it over manual control as well. So take one of my cameras has Siren and Red/Blue flashing lights, I can have the Recorder tell the camera only to set off the lights if I wanted to or all of the alarms control seeing it also has an alarm output so it would set off Alarm sound, light and output.. Or maybe even though I can adjust Volume maybe it has been to loud I can have it via the recorder only trigger the flashing lights.. However keep this in mind and one of the Biggest PITA with Hikvision is that he says this is a 7208-HUHI however there is K1 and K2 and blah blah sadly not all the 7208-HUHI has the same features so trying to find the one that has what you want can be costly if you don't have access to a Store Front with system setup where you can find the feature you want and they setup products to be sold for that feature like you would at a Computer store...

[@Chavacano]

@@revo2maxx Hi I got this working. First you have to update the firmware on the cameras so it has the LED trigger on an event firmware update. So the key thing is to enable the smart event on the NVR to allow human detection etc... but you need to tick the enable the AI from device selected option selected. Then utilizes both technologies from the NVR and the camera to work together.