HISTORIC 70 YEAR OLD SCYTHE RESTORATION | World War 2 Machine!

[@ianbates1312]

I used to use one of these Allen Scythes in the early 1970’s for Sedgefield District Council. These Allen Scythes take NO prisoners!! The longer the vegetation the more it loved it. They would go where the operator would be reluctant to follow!!

[@athena1491]

that makes me imagine them like a very large dog that has decided that we ARE going over there to smell that bush, no matter how much you dont want to

[@kougerat5388]

@@athena1491 I like your analogy, made me chuckle😉

[@ARockRaider]

Wouldn't surprise me one bit! With such large wheels I'd bet the operator would be more likely to get stuck then the machine!

[@garyhiggins4333]

Great video 📹 👍

[@tomellis4750]

I remember them in Billingham, which was in County Durham at the time. They could cut along steep embankments. Recall them as a darker green, without a red petrol tank. Fine machines.

[@Timico1000]

I doubt that even one of the workers at Allan Oxford would have expected that in 2024 some bloke on the internet (even: what´s the internet?!) restores their machinery. Great work, love your channel!

[@reelrapid]

Great to see one again, I regularly used one to cut paths and swims on a lake in Suffolk UK in the 1960/70s when I was a water bailiff. There were extra blades you could add to make the cut twice as wide. The huge wheels made it perfect for rough ground.

[@MachineryRestorer]

thanks for sharing! it’s always interesting to hear from people who’ve used the machines that I restore

[@reelrapid]

@@MachineryRestorerit was a delight to see you restore it, I remember the odd field repair on it sitting beside a lake, and chucking an old tarpaulin over it between jobs. I was a young lad and all the older guys I was with are sadly long gone I guess. Thank you for the reminder of good times.

[@charliemartin-k7m]

My Dad sadly has a later versions of these kind of mowers and he only used it 4 times because it would shake its self apart.

[@johncarnie3726]

During the summers of the late 60's I worked on the gardens of Booth Hall Childrens Hospital in Manchester. I remember working on a slope with one of these beasts, it refused to go in the direction I wanted - I developed Desperate Dan muscles!

[@SeattlePioneer]

> Be on the lookout for these extra blades! Great fun to watch it cutting through the brush.

[@RogierYou]

I appreciate you telling how many years it has taken to restore this machine. Often videos like this make it look like this is done in a few days..

[@madcapmartin1]

My Dad purchased one of these machines second hand in 1958 to make hay on our small farm in Lancashire. It was absolutely bomb proof It never broke down... ever. and was still in use until 1984 with just annual maintenance. It was sold on to another small holding in Wigan and was still in use up till 1989 that I know of, It still may be going till this day..

[@WalldoTheWInner]

Have you ever seen a Gravely? We have them here in the states and they're a bit similar to this. Can still find them for sale in a lot of places. People know what they're worth though unfortunately 😅

[@BrilliantDesignOnline]

Goes without saying, you are a brilliant craftsman. The historical photos of the fabrication factory and the information was excellent. Thank you for saving this machine, and even moreso, for documenting it.

[@roughandrrag]

One minute in and I can already tell I do like this new style of narration.

[@charliemartin-k7m]

He is one of the few that will Finish a Project he gets and starts.

[@carterherbst659]

Agreed

[@williamworth2746]

Right I enjoy the restorators that are silent but I love to be informed also plz let us know the product's you use in the process

[@AustralLabs]

I loved the style too.

[@madmanmitch5270]

Agreed

[@klackon1]

What a cracking, informative video: Back in 1984, a kind neighbour provided me with a recently refurbished Allen Scythe when I moved into my new house. I had half an acre of tall grass to cut and my Flymo hover mower was not up to the job. The Allen Scythe proved to be a marvellous bit of kit.

[@4acrehome168]

That bronze gear is absolutely a work of art. I’d hang that on my wall

[@michaelhart895]

It’s a Worm Wheel not a gear . Engages with the worm shaft .

[@88njtrigg88]

18:45 Agreed, however a plastic governor gear?

[@ernovesterinen6826]

@@88njtrigg88 I really dont think that plastic gear is original. Overhauled at some point?

[@88njtrigg88]

@@ernovesterinen6826 Thanks for the heads-up.

[@Half_of_The_World]

Old English machines were magnificent, they were ridiculously simple, and would outlive two and a half generations of your family

[@deborahchesser7375]

So true, built back when things were made to pass on, after all, we aren’t taking anything with us.

[@игорьб-м3м]

Сделано на века. Уважение производителю.

[@rickbrasche8781]

stuff designed to help feed an entire country under siege, to keep all classes of that country alive, was designed to be seriously reliable. Stuff that's designed to sell for a profit and failure doesn't cause the seller's company to be bombed, not so much. If people hadn't been encouraged to "upgrade" so many products over the years, most of those 40s and 50s machines would still be operational and in use I believe

[@syrenadurager]

@@rickbrasche8781 could not agree more. Now its all made in chine with a life span of how long it took them to make the crap in the first place. I will be so happy to see production start up in other countries that actually care about what they are making and take pride in a product that is of quality over chinas quantity. I do my utmost not to buy "made in chine" but its almost impossible . Ill be glad to get back to quality instead of the junk coming out of china.

[@Jeekinz]

Love all the commentary and history. Night and day from your old videos.

[@MachineryRestorer]

Glad you like them!

[@electronixTech]

Just a small thank you for many years of enjoyment watching you do high quality repairs. Cheers from Canada.

[@MachineryRestorer]

Thank you so much for your generosity and support! 🙂

[@electronixTech]

@@MachineryRestorer Thanks! 👍

[@jamesburns8247]

I love to see old machines given a new life. As a 42 year industrial electrician now retired my greatest joy was making an old machine work better than when new with modern parts and a skilled machine shop backing me up.

[@Dieseljonnyboy]

What an incredible restoration! That has to be the best Allen Sythe in the world! I used to operate one with the villiers mk 25. I was too tall for the handles and it was back breaking to operate. They are unstoppable!

[@mattc-em3sb]

This is an amazing restore video, I love how you added the back story of the company with photos and description. Was a very nice touch and learning curve for me

[@MakinNbreakin]

Now this is quality KZbin content.

[@tubbybrutus]

i remember as a lad my grandad had one off these on his small farm and a big white shire horse he would sit me on his horse whilst he ploughed the fields also when he would do the hedge row and grass he had one off these machine allways fascinated me and he would let me push it along whilst he would be behind me as i was about 10 or 12 yrs old at the time great memorys for me and watching you rebuild one wow took me back to my child hood thanx and keep these great videos coming

[@brycefugate4416]

It's cool that these folks are keeping these old machines alive

[@patjohnson3100]

One of your best, most interesting restorations yet. Thank you for restoring this great vintage piece of equipment. Still very practical after all these years. Still very durable. I think it was worth all your time and effort to save. I hope your video encourages more people to preserve these solid, tough machines.

[@jonathancraig8247]

In addition to the impeccable filming, painstaking engineering , focused diagnosing and immaculate end product, I like the background of birdsong - takes me back to happy days growing up in England. Greetings from NZ🇳🇿and thanks for all your hard work.

[@wes11bravo]

I must add another comment to amend my previous one, which was flippant (albeit good natured). This machine is a mechanical work of art, a prime example of superlative British manufacturing and craftsmanship. You definitely did it proud with your exceptional restoration!

[@michaelkunze411]

thank you so much for not only showing the restoration process, but also explaining the history of the manufactoring company. And of course todays usage of the terrain. Best regards from saxony, germany. (please: excuse my terrible english...)

[@davidwelch6796]

There is nothing to excuse. Your English is excellent and your comment is clear.

[@pegleg1514]

Both, the video and the restoration are really well done. A pleasant voice, no unnecessary music and a little digression into the history of the manufacturer. This makes Sunday mornings really enjoyable! Best regards from Germany

[@electrickal1]

Exactly!! Loved that video, many thanks for uploading it to YT, that took a lot of mechanical and technical skill to produce. We do appreciate that.

[@RüdigerValley]

Sooo eine schöne Arbeit! Es machte ihnen sicher viel Freude. Ich habe jetzt den dritten Balkenmäher der heutigen Generation und wünschte mir, es gäbe diesen aus dem Video noch zu kaufen, so herrlich unaufgeregt und zuverlässig mit wenig Unwucht, das ist perfekt. Die damaligen Ingenieure und Monteure haben sehr gute Arbeit geleistet. Vielen Dank für ihre Präsentation!

[@aaronfurman8208]

If there is a restoration video worthy of a Thumbs Up, its this. Great Job Sir. Well done indeed.

[@robertwalker6404]

As 13 year old lad in 1976 hanging on to one of these incredible machines clearing a hillside in North Devon I can honestly say I have lived and nearly been killed several times. Health and safety was a thick pair of jeans and a whole lot of respect for these magnificent machines. Thanks for reigniting old memories of my Dad.

[@cwk19]

You did an amazing job on this restoration and the video production quality is incredible. Easily the best restoration channel on KZbin without a doubt. 🎉😀

[@MachineryRestorer]

thank you so much!! 😃

[@sparfar]

It IS the best, unless you like speed up restoration with alot of hyped speach... This is unique

[@donalde3227]

You sir are a genius.

[@MoldyStir-Fry]

This restoration is incredible and yet the one thing that really caught my attention is how perfect your cotter pin installation is! I wish every cotter pin was installed so nicely!

[@Mind-your-own-beeswax]

Split pin.

[@MoldyStir-Fry]

@Mind-your-own-beeswax We've always called them cotter pins in my area, but yes, you are correct. Pennsylvania has a lot of alternate names for literally everything 😂

[@shakerLT]

Very well made video and restore Dag👍. Your persistence and patience is noticed and appreciated. Well done my friend.😊

[@Mithraschosen]

Dag, you always do a fantastic job with these. It so nice to see history and engineering come together in a restoration project. Keep crackin' on! 😎👍

[@a_british_lass_stream_archives]

FINALLY SOMEONE WITH COMMENTARY i am a fiend for restoration videos but few have voice overs... this is a breath of fresh air

[@MalJ-eb7nv]

I remember the local council using these cutters in the 1950's. Great restoration- thankyou.

[@neiloconnell2120]

Well done you. You used the odd technique there I have not seen before, nor yet used. In about 1982, I managed to get one of these working again for a man who couldn't. What a dangerous bit of kit it was. That working scythe at the front was potentially lethal. It was certainly capable of disfiguring forever, any limb that got in the way. Thankfully, the chap's interest was short-lived, and the beast was allowed to rust in peace. The 2-stroke engine was fun to get started. It was straightforward once the points and timing were set. The crankshaft seals were good and nothing was wrong that a good service could not fix. Not that I was anything other than an amateur, in skill set. Memory lane, thank you.

[@peterhammond7535]

The best part of a restoration, is watching somebody else doing it. I wonder just how many hours work lay behind this easy-watching video.

[@toddjensen5689]

This is excellent Daggerwin! I am blown away, great shots, just enough information narration/explanation and the history of machine. Fantastic!

[@robertanderson-yx8mo]

My grandfather had one and it used to go through brush like it was cutting grass, absolutely amazing machines,nothing like it now

[@natopeacekeeper97]

Wow! Really great restoration video!! I was born in 1955 and I can remember when mowers and tillers all had rope starters. Ours had a wooden handle to give you something to grip. My grandmother lived on a farm in rural Missouri, and she had a Gravely tractor very similar to your Allen and it had different attachments as well. You really did a super job restoring this old machine and goes to show if you take really good care of something, it can run for a very long time. Watching from North Carolina, USA.

[@raccoonpeddler6730]

great project as always and ive really loved the way this video was structured with the allen scythe history lesson before the restoration. i could feel you were very pationate about this one and it makes the video so much better. also the way this engine came back to life with all that rust in the vital components and how well all the other parts have survived the test of time speaks a lot about the build quality. too bad they don't make machines like that anymore.

[@haroldlamble5163]

They couldn't afford to make something to this quality today. It with stood the test of time.

[@pauldockins9635]

Amazing machine, great rebuild. The history lessons, and pictures were awesome.thank you for sharing your work.

[@subramaniamchandrasekar1397]

We all know, you made 5 separate videos and have 5 work benches with each section dismantled separately. Easy to dismantle, very difficult to put back. And even more difficult to make it work again. Excellent work. Thank you.

[@wendellmcqueary8624]

That's one of the benefits of video. You don't HAVE to remember where and how everything goes. You just go look at the video. Us old people draw pictures. LOL. oldtroll57

[@peteacher52]

It looks more straight-forward and easier to work on than a Gravely. You have a pleasantly easy voice to listen to and did not add silly obtrusive music. Well done!

[@thecountryman7028]

I restored one of these back in the 80,s . well done.

[@Maximus65]

Excellent work! I’m sure many people would have given up on this machine after a while of trying to find the replacement engine. I’m glad to see it brought back to life 💪

[@nickjanssens]

This brought back memories of working on an old BSA Bantam 60 + years ago as a 12 year old, a great watch.

[@martinwade9421]

I was fitting new rings on a Bantam yesterday. I broke one, ouch! Now to get another set from the UK to Ireland. Customs and bureaucracy after Brexit. Ouch again!)

[@davidwelch6796]

A great project carried out to perfection. Very satisfying to see the scythe in action too. Apart from your various engineering skills I also compliment you on an excellently produced video that is a joy to watch.

[@keegan773]

That takes me back to the early 1950’s. The council used them to cut a vacant lot near my junior school. We used to catch the grasshoppers as they fled. I was thinking of these while watching videos of modern gardeners with their zero turn mowers etc. I didn’t know the name Allen Scythe, but I do now.

[@Ragnar8504]

This type of mower is still fairly popular with farmers where I live. They don't leave a perfectly manicured lawn but they're great for cutting tall grass and weeds in areas too small to get a farm tractor into.

[@davidwelch6796]

Also back in the 1950s. I remember the church warden cutting the grass in the churchyard with an Allen scythe, and the scent of fresh mown grass is linked to the memory too.

[@harunbakak285]

Good quality machine. Its good you restore it for the new generation to see.

[@jamesfearing9459]

That machine is the most robust engineered and machined cutter I’ve ever seen. I wish we had mowers made that well here in the states! Great restoration.

[@stco2426]

Superb. I used a couple of these machines, (likely 2-stroke) to mow a winter snow ski slope back in the 1980s. We wanted to mow the grass in the summer so it didn't poke through the snow in the winter and the Allens were great at moving up slopes. They had a tendancy to jump out of gear when mowing downslope (they were well used) so they were fitted with kill switches and the idea was to try to skew them sideways if the ran away. They worked very well on the rough-ish moorland slopes and spaces around the infrastructure. This was a fab rebuild and it was interesting to see how they work and I was impressed with the attention to detail. Very like a Geoffrey Croker video and very good. Must watch more and thanks!

[@Laxpowertoo]

You could have a liner fitted and bored to standard size. Most good machine shops can do it for a reasonable price.

[@MachineryRestorer]

That was plan C lol

[@EvasiveShado]

What a process!! So glad you finally made it through, 3 years is a long time to be compressed into a one hour video. It was a great experience watching this masterpiece and I truly enjoyed your narration❤. Just liked and subbed!

[@sherlockholmes5300]

The hedgehog at 25:46 made me look twice lol

[@ELOfanatic]

I thought it was a tribble at first

[@thecsabel]

Same here...

[@saintsavenged2092]

Same here lol

[@unknown_gamer8200]

Haha didn't even notice that 😂

[@SGM260190]

😂😂😂

[@MrSpirit99]

I found a restoration channel without artificially aged objects.

[@bforbernie4908]

💯

[@oceanside2152]

Quite enjoyable to watch and follow along the restoration. Excellent work. From one restorer, to another.

[@davidwacker1925]

British engineering at it's finest. A machine from a time when companies wanted to be remembered for the quality of their products.

[@blackcountryme]

Stuff was built to last, not built to last x amount of years so you would buy a new one.

[@Andy-vh2ue]

as an American that grew up farming with my grandpa, I still have the majority of his old antique farm implements. They were definitely built to last. There is nothing like old machinery

[@hindugoat2302]

ITS WHISPER QUIET!!!

[@taters-no4gj]

I've no idea why I've just spent nearly an hour watching something I know nothing about: engines and gardening. However, it's always fun and interesting to watch someone who has a genuine love of what they're doing. One thing I can say for certain is that this guy's got the patience of a saint. It took over 3 years to get this thing fixed!!! I'd have been pulling my hair out after a week 🤬. Anyway, I thoroughly enjoyed the video and will be tuning in for more of these vids as a subscriber. God bless 😉👍🏼

[@hughbryant1326]

Congratulations on restoring a wonderful engineering machine. An old friend of mine had one and cherished it and up until the late 80's it earned it's keep for at least 50 years. Thank you for the restoration,I thoroughly enjoyed watching the process from beginning to end.😊

[@gregmannos]

That was produced when pride in production was still in style.

[@JamesCM793]

Those days are long gone, sadly 😢

[@unknown_gamer8200]

Thank you this might just be my favourite one of your restoration videos to date! It was so satisfying, and you really can't beat the way these machines were built back in the day.. can't imagine someone restoring a modern mower from today in 80 or so years. Also wanted to say i love how you explain stuff as you go along i don't know much about mechanics but want to learn so its interesting hearing you explain stuff as you go!

[@davidstewart4570]

It seems extraordinary that whoever stripped and re-assembled that engine in the past never re-lapped the valves.

[@deborahchesser7375]

I doubt the average Joe even considers details like that. They clean a carb and think it’s ready to go, who needs jetting or float height specs ? Lol 😆

[@Tropingenie]

One of your best restorations, and best videos yet. I loved the delve into the history of the machine and Allen Oxford. I've always thought these felt more like "restoration documentaries" and adding the historical context really drove that home and made an already good video better!

[@robertzapatka1082]

I love the old machines they were all built like tanks, every facet able to be repaired, rebuilt, or replaced, never having to be thrown out.

[@Silverado21]

Exactly! 85% of outdoor equipment these days are made with then metals.

[@Ragnar8504]

They were also frighteningly expensive. I once tried to compare the price of a late-1950s kitchen mixer to a 1950s income and then figure out what it would cost today - would you buy a kitchen mixer that costs you a month's salary? I definitely wouldn't. If something lasts half as long as one of those beasts at less than a quarter of the price you're still saving money in the long run, it's only the environment that suffers with disposable stuff.

[@johnsykes9623]

Wow. Exclent video, thanks. I remember spending some very happy days in 1970s Scotland with one of these superb machines. So nice to see your sensitive restoration. Well done

[@Sarasota-r6c]

Small farming machine like this are actually super efficient and effective.

[@michaeltreadwell777]

That was brilliant. Such great machines - go anywhere, cut anything. Lovely to see these old machines restored - much stronger than anything built today. Well done 🙂

[@henriknordeng]

REally beautiful work. I love these old machines, they where quality built from pepole that did it for the love of building machines that they could be proud of.

[@MrStanwillis]

Thank you very much! I'm seventy six years old, and I love mechanical elements. Every part of this video is great. The only thing missing is the smells associated. 😊😊😊

[@jamesfield5346]

Your little animal left you during the assembly of your sump cover/gasket thing, lol

[@johnbradford9235]

Fantastic! All round! Fantastic choice of project, fantastic production, fantastic work through the three years, and a fantastic result at the end of it all. So so well done Mr. Machinery Restorer 👏👏👏. Thanks looaads for making that vid for us 🙏🙏🙏. Thoroughly appreciated and enjoyed 👍👍👍. 😎

[@jacobanderson1891]

Machines today are definitely not built like they were back then. They’re over-engineered, overkill, overly-complex, and, when it comes to doing the job, overwhelmed to the point of failure. I love the old machines that were very simple, but worked just as well if not better than modern machinery. Well done! And 3 years? …….. I know the feeling lol.

[@rusty911s2]

But don't forget once you adjust for inflation, machines like this were enormously expensive. Still lovely to see of course!

[@phil8239]

What an absolute treat watching you skillfully disassemble and reassemble, it's wonderful to watch these machines come back to life!! Brings back a lot of great memories as my father had one of these to cut our field full of fern behind our house, as a child back in the 60s it was a challenge for me just to reach the handle bars . Thanks very much and congratulations to you, kind regards Phil

[@jakesummers3138]

Hey daggerwin, quick question do you use any sites in particular to find parts and rebuild sets etc? You've inspired me to do some of this work myself and I am currently renovating a Qualcast rotivator but it's an absolute nightmare to find parts, and when I do think I've found them they turn up wrong so far 🙄 👍

[@MachineryRestorer]

Hi I mostly use Ebay for parts...failing that specialist websites.

[@jakesummers3138]

@MachineryRestorer I thought as much 👌 thanks for the reply.

[@playingwivwood]

No way. This is the same dude that made farming sim videos I watched a lot of daggerwin about 6-7 years ago

[@Josh517...]

Yep same great guy​@@playingwivwood

[@dang.2574]

I’m thoroughly impressed with your ability to make this work look easy. Thousand thanks for sharing your knowledge and expertise.

[@trevorpom]

When making your own gaskets in this way remember kiddies, knock out the bolt holes first, not last like here, and then feed the bolts through the holes. This holds the gasket paper in place.

[@dismaldunc]

oh golly! that was perfect, the filming, editing,voiceover and subject were a joy. thanks for really enhancing my evening, I really hope there are more like this...

[@diddy750]

I love these kinds of videos!! Fixing up old and unique pieces of machinery is just fun to watch

[@jimhammer1]

Memory lane. My grand father had one and my uncles and father borrowed it. A really versatile machine. EXCELLENT RESTORATION and narration. Well Done!

[@jimhammer1]

I’m 79 now.

[@tompattikoenig9333]

Nicely paced, wonderful commentary! Thanks for your time and sharing your expertise - greatly appreciated! I’ve watched all your videos - looking forward to the next one!

[@bishopkinlyside8477]

Hi, just come across your side. I just love it when I see people like yourself restoring old machinery not just looking at it like that piece of crap and it needs to go to the dump or to be recycled. Keep up the good work. I really enjoyed the video yes and I have subscribed , Cliff from Logan City Queensland Australia 🇦🇺, we are on the big island

[@BEdmonson85]

Oh man, I very much enjoyed watching this project! It's nice to have a decent narration to go along with the build. Well done!

[@howardoller443]

I thoroughly enjoyed this video. Thank you so much for bringing this old machine back to life. I love all the effort you put into this, with the sole exception being I would have kept the original instruction plate instead of replacing it with a sticker facsimile. I look forward to seeing more videos in the future.

[@Bayan1905]

I love watching old farm equipment in action, reminds me of my grandfather's farm here in New York. Having grown up in the Great Depression he never threw anything away and all of his equipment, from his tractor on down was all older and everything worked. I remember his old Ford 8N tractor that he later replaced with a Farmall H. He had a 1964 Willys he used to haul firewood around in and I used to help him with that back in the 1980's. He had a couple of old hit n miss engines, one he made into a battery charger. A couple of years back I was at my local dump and someone had dropped off an old reel mower. It was in decent shape, the wheels were not locked up, but you could tell they were clogged and the blade needed a good sharpening. I took him home, got the wheels off, pulled out some decades old dried grass and cleaned and greased them and then sharpened the blade and it cuts as good as my gas mower now. It dates back to the 1950's. I've got a wheelbarrow here that came with my property that's tougher than any I've ever seen as is probably 50-60 years old at least. No, companies don't make things like they used to.

[@joshbruemer6776]

I can not get over these restorations. You can tell you have a real passion for this! I would love to know a little backstory like where you learned to do all this. Also, could you do a tour of your workshop? I would love to see what all you have and are working with.

[@Billrobster]

A lovely piece of restoration engineering on a quality machine.

[@architypeone8646]

That is a beautifully engineered and well built piece of machinery! I can just imagine all of the thought and hand drafted drawings that it took to design and build this machine. I then imagine all of the other companies and machinery of that era and all of the people involved in the making of this equipment. It is a testament to our grandfathers, (and probably some grandmother's ), ingenuity. Enjoyed the video.

[@Roger.Coleman1949]

Wonderful video , beautifully produced and a tribute to a great quality British made machine when we still had a manufacturing industry.With the care and attention that was lavished on this example , it will now last indefintely for generations to come.I am sure Dinky Toys produced a model of the Allen scythe.

[@markhill7901]

Your best restoration ever and congratulations on your skills and perseverance in creating a new life for this awesome machine.

[@Razalonjrt1]

What a wonderful Narration lets us all know what is happening and easy to follow, Man they really do not make them like this any more it good to see the old girl with new life and still cuts great. A good restoration :).

[@stephenlines9431]

What a beast! So refreshing to watch someone properly restore a classic piece instead of just spraying WD40 down the bores. You're the BOSS! More please?

[@TruckinDavo]

Absolutely loved the history documentary segment you did! Would be awesome to do that in future restoration videos. This is a incredible machine

[@ianhobbs4984]

Thank You it was a real pleasure seeing this old machine being bought back to life with your care and attention. One point to really clean Brass is Brasso and a cardboard beer mat as we did in the army.

[@MelissaWillowCooper-bi4ff]

I’ve got to say daggerwin your a professional machinery restoration expert I would not know where to start on the engine rebuild watching your video and seeing you rebuild the entire engine was a learning experience I’ve definitely learned some things from you I used to help my dad with his projects I mainly helped with sanding metal parts spraying sand blasting and cleaning engine parts even when I was on work experience at Massey Ferguson dealership in the engineering workshop I was just shadowing the mechanics You have done a lovely professional restoration there daggerwin and it really did a professional job cutting through the long grass as well it was coping with it very well they just build things to last back in the 50s and 60s quality and build to last

[@philipashley9723]

Wonderful work, your attention to detail is amazing.

[@jasonketchum4052]

I am here in the States, and I truly enjoyed many other of your videos. What a fantastic find you have and such a beautiful color of a machine.

[@aveedub7403]

Thank you for posting this!! Can't believe I came across this! I used to use one in Sussex when I was a kid/teenager, cutting down orchard grass etc. It terrified me, I always imagined getting my fingers caught in blade! Irrational thought I know! Once mastered it was a good tool, but not for tall people like me as I had to constantly stoop over! I'll never forget the distinctive old two stroke engine sound/smell and the clackety clack of the blades! Starting could be a challenge with the rope! Ahhhh the days before health and safety!

[@bobarcher4599]

Beautiful restoration, very pleased to see that you used all new hardware, have seen so many where old rusted nuts and bolts were reused

[@jonathanjones9790]

Thanks for a complete build sequence, with nothing glossed over. I have been using one of these wonderful tools for the past ten years to cut long wildflower meadow grass in autumn. Like yours, mine has the later servo clutch. Great to see that I'm not alone in my appreciation of their build quality. (subscribed!)

[@The144Kth]

Great to see that the art of gasket making is not entirely lost! This is the first time I have seen it done on KZbin. You can also use a spanner for the small holes ( For those who have never done it before)

[@Dragonsbrath]

Great job reworking this Ole cutter mower and it seems to function quite well. Looks museum quality. Enjoyed the video. Very nice.

[@brucklay227]

I longed for this Allen scythe back in the 60’s but they were scarce because of their popularity. People held onto them.I finally settled for a Mayfield. Remember those? Smaller drive wheels and a pull-back starter handle. It gave me many years service. This was a most enjoyable restoration so thank you. Nowadays I suspect H&S would have a lot to say !!