Hobart P660 60qt 3 phase, How it supposed to Rotate

Hi guys
In this video just as a reference we have a P660 Hobart mixer 3 phase important to know 3 phase motors are dual rotation can rotate both directions and some electricians don’t check the rotation and that’s when you will have issues with your mixer so I hope this video is helpful remember rotation on any Hobart 3 phase is clockwise, you shouldn’t worry about rotation on single phase mixers as it only rotates in one direction clockwise
200/208/230vlt mixers.
3 phase means 3 hot lines plus ground
1 phase means 2 hot lines plus ground

[@tjs_welding_and_fabrication]

I deal with rotation for 3 phase hydraulic pumps as well. As you state many dont pay attention when wiring.

[@tymz-r-achangin]

Was interesting to watch. Thanks for the video :o)

[@osamaibrahem63]

So you have any idea why when installing the worm gear shaft in place it's loose and probably doesn't sit , and keeps moving? H600 Thanks

[@calucoelsv]

You need to be more specific Example at the bottom the bearing is self aligned so it moves its design that way on h600 so once installed it’s going to move sideways but once everything is assembled the worm gear shaft will be pretty tight, I understand that this might be what you are talking about it if you refer to something else write me again will try to figure it out.

[@osamaibrahem63]

@@calucoelsv yes this is what am talking about, but when everything is assembled and I put flour and start it the gear just moves away from the motor gear and don't turn the other gears.

[@calucoelsv]

@@osamaibrahem63i that’s strange my friend Next steps would be to count on every gear all the teeth I could help you with the parts manual but you have to find a way to contact me trough WhatsApp my phone number is in some videos